include/configs: Numerous typo fixes: "controler" -> "controller".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

include/configs/B4860QDS.h

@@ -83,7 +83,7 @@
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 

include/configs/BSC9132QDS.h

@@ -85,7 +85,7 @@
 
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #if defined(CONFIG_PCI)
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */

include/configs/C29XPCIE.h

@@ -92,7 +92,7 @@
 
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #ifdef CONFIG_PCI
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */

include/configs/MPC8536DS.h

@@ -51,9 +51,9 @@
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* Enable PCI controller 1 */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */

include/configs/MPC8544DS.h

@@ -25,9 +25,9 @@
 
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* PCI controller 1 */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */

include/configs/MPC8548CDS.h

@@ -34,7 +34,7 @@
 
 #define CONFIG_PCI		/* enable any pci type devices */
 #define CONFIG_PCI1		/* PCI controller 1 */
-#define CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1		/* PCIE controller 1 (slot 1) */
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */

include/configs/MPC8572DS.h

@@ -40,9 +40,9 @@
 
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3		1	/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */

include/configs/MPC8610HPCD.h

@@ -45,7 +45,7 @@
 #define CONFIG_SYS_SCRATCH_VA	0xc0000000
 
 #define CONFIG_PCI		1	/* Enable PCI/PCIE*/
-#define CONFIG_PCI1		1	/* PCI controler 1 */
+#define CONFIG_PCI1		1	/* PCI controller 1 */
 #define CONFIG_PCIE1		1	/* PCIe 1 connected to ULI bridge */
 #define CONFIG_PCIE2		1	/* PCIe 2 connected to slot */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */

include/configs/MPC8641HPCN.h

@@ -46,8 +46,8 @@
 #define CONFIG_SRIO1			/* SRIO port 1 */
 
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (ULI bridge) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (ULI bridge) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_FSL_LAW		1	/* Use common FSL law init code */

include/configs/P1010RDB.h

@@ -176,8 +176,8 @@
 
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #if defined(CONFIG_PCI)
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2			/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2			/* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */

include/configs/P1022DS.h

@@ -134,9 +134,9 @@
 
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2			/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3			/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2			/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3			/* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

include/configs/P1023RDB.h

@@ -33,9 +33,9 @@
 #define CONFIG_FSL_ELBC		/* Has Enhanced localbus controller */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
-#define CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		/* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3		/* PCIE controler 3 (slot 3) */
+#define CONFIG_PCIE1		/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		/* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3		/* PCIE controller 3 (slot 3) */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */

include/configs/P2041RDB.h

@@ -52,9 +52,9 @@
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 

include/configs/T102xQDS.h

@@ -577,9 +577,9 @@ unsigned long get_board_ddr_clk(void);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
-#define CONFIG_PCIE3		/* PCIE controler 3 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
+#define CONFIG_PCIE3		/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 #define CONFIG_PCI_INDIRECT_BRIDGE

include/configs/T102xRDB.h

@@ -563,11 +563,11 @@ unsigned long get_board_ddr_clk(void);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
-#define CONFIG_PCIE3		/* PCIE controler 3 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
+#define CONFIG_PCIE3		/* PCIE controller 3 */
 #ifdef CONFIG_PPC_T1040
-#define CONFIG_PCIE4		/* PCIE controler 4 */
+#define CONFIG_PCIE4		/* PCIE controller 4 */
 #endif
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */

include/configs/T1040QDS.h

@@ -65,10 +65,10 @@
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
-#define CONFIG_PCIE4			/* PCIE controler 4 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
+#define CONFIG_PCIE4			/* PCIE controller 4 */
 
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

include/configs/T104xRDB.h

@@ -130,10 +130,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
-#define CONFIG_PCIE4			/* PCIE controler 4 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
+#define CONFIG_PCIE4			/* PCIE controller 4 */
 
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

include/configs/T208xQDS.h

@@ -550,10 +550,10 @@ unsigned long get_board_ddr_clk(void);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
-#define CONFIG_PCIE3		/* PCIE controler 3 */
-#define CONFIG_PCIE4		/* PCIE controler 4 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
+#define CONFIG_PCIE3		/* PCIE controller 3 */
+#define CONFIG_PCIE4		/* PCIE controller 4 */
 #define CONFIG_FSL_PCIE_RESET
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */

include/configs/T208xRDB.h

@@ -500,10 +500,10 @@ unsigned long get_board_ddr_clk(void);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
-#define CONFIG_PCIE3		/* PCIE controler 3 */
-#define CONFIG_PCIE4		/* PCIE controler 4 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
+#define CONFIG_PCIE3		/* PCIE controller 3 */
+#define CONFIG_PCIE4		/* PCIE controller 4 */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 /* controller 1, direct to uli, tgtid 3, Base address 20000 */

include/configs/T4240RDB.h

@@ -92,9 +92,9 @@
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 

include/configs/controlcenterd.h

@@ -245,7 +245,7 @@
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */

include/configs/corenet_ds.h

@@ -67,8 +67,8 @@
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
 #define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 

include/configs/cyrus.h

@@ -59,8 +59,8 @@
 #define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 

include/configs/km/kmp204x-common.h

@@ -45,8 +45,8 @@
 #define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 

include/configs/ls1021aqds.h

@@ -528,8 +528,8 @@ unsigned long get_board_ddr_clk(void);
 
 /* PCIe */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 

include/configs/ls1021atwr.h

@@ -377,8 +377,8 @@
 
 /* PCIe */
 #define CONFIG_PCI		/* Enable PCI/PCIE */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 

include/configs/ls2080a_common.h

@@ -185,10 +185,10 @@ unsigned long long get_qixis_addr(void);
 #endif
 
 /* PCIe */
-#define CONFIG_PCIE1		/* PCIE controler 1 */
-#define CONFIG_PCIE2		/* PCIE controler 2 */
-#define CONFIG_PCIE3		/* PCIE controler 3 */
-#define CONFIG_PCIE4		/* PCIE controler 4 */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
+#define CONFIG_PCIE2		/* PCIE controller 2 */
+#define CONFIG_PCIE3		/* PCIE controller 3 */
+#define CONFIG_PCIE4		/* PCIE controller 4 */
 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
 #ifdef CONFIG_LS2080A
 #define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"

include/configs/p1_p2_rdb_pc.h

@@ -306,8 +306,8 @@
 
 #define CONFIG_FSL_ELBC
 #define CONFIG_PCI
-#define CONFIG_PCIE1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2	/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */

include/configs/p1_twr.h

@@ -48,8 +48,8 @@
 
 #define CONFIG_FSL_ELBC
 #define CONFIG_PCI
-#define CONFIG_PCIE1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2	/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */

include/configs/sbc8641d.h

@@ -44,8 +44,8 @@
 #define CONFIG_SRIO1			/* SRIO port 1 */
 
 #define CONFIG_PCI		1	/* Enable PCIE */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */

include/configs/t4qds.h

@@ -32,9 +32,9 @@
 #define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC			/* Enable IFC Support */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE2			/* PCIE controler 2 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE2			/* PCIE controller 2 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 

include/configs/xpedite517x.h

@@ -30,8 +30,8 @@
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */

include/configs/xpedite537x.h

@@ -30,8 +30,8 @@
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 */
+#define CONFIG_PCIE2		1	/* PCIE controller 2 */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */

include/configs/xpedite550x.h

@@ -31,7 +31,7 @@
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (PEX8112 or XMC) */
+#define CONFIG_PCIE1		1	/* PCIE controller 1 (PEX8112 or XMC) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */