powerpc: P1020RDB-PC: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1020RDB_PC instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020RDB_PC.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -120,6 +120,11 @@ config TARGET_P1020MBG
 	bool "Support P1020MBG-PC"
 	select SUPPORT_SPL
 	select SUPPORT_TPL
+config TARGET_P1020RDB_PC
+	bool "Support P1020RDB-PC"
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+
 
 config TARGET_P1_P2_RDB_PC
 	bool "Support p1_p2_rdb_pc"

board/freescale/p1_p2_rdb_pc/Kconfig

@@ -1,5 +1,6 @@
-if TARGET_P1_P2_RDB_PC || \
-	TARGET_P1020MBG
+if TARGET_P1_P2_RDB_PC		|| \
+	TARGET_P1020MBG		|| \
+	TARGET_P1020RDB_PC
 
 config SYS_BOARD
 	default "p1_p2_rdb_pc"

board/freescale/p1_p2_rdb_pc/ddr.c

@@ -109,7 +109,7 @@ dimm_params_t ddr_raw_timing = {
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 37500,
 };
-#elif defined(CONFIG_P1020RDB_PC)
+#elif defined(CONFIG_TARGET_P1020RDB_PC)
 /*
  * Samsung K4B2G0846C-HCF8
  * The following timing are for "downshift"

board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c

@@ -428,7 +428,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 {
 	phys_addr_t base;
 	phys_size_t size;
-#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC)
+#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC)
 	const char *soc_usb_compat = "fsl-usb2-dr";
 	int usb_err, usb1_off, usb2_off;
 #endif
@@ -478,7 +478,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 	}
 #endif
 
-#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC)
+#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC)
 /* Delete USB2 node as it is muxed with eLBC */
 	usb1_off = fdt_node_offset_by_compatible(blob, -1,
 		soc_usb_compat);

configs/P1020RDB-PC_36BIT_NAND_defconfig

@@ -2,13 +2,13 @@ CONFIG_PPC=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y

configs/P1020RDB-PC_36BIT_SDCARD_defconfig

@@ -6,13 +6,13 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig

@@ -7,13 +7,13 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

configs/P1020RDB-PC_36BIT_defconfig

@@ -1,12 +1,11 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y

configs/P1020RDB-PC_NAND_defconfig

@@ -2,12 +2,12 @@ CONFIG_PPC=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y

configs/P1020RDB-PC_SDCARD_defconfig

@@ -6,12 +6,12 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

configs/P1020RDB-PC_SPIFLASH_defconfig

@@ -7,12 +7,12 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

configs/P1020RDB-PC_defconfig

@@ -1,11 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PC=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y

include/configs/p1_p2_rdb_pc.h

@@ -30,7 +30,7 @@
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
-#if defined(CONFIG_P1020RDB_PC)
+#if defined(CONFIG_TARGET_P1020RDB_PC)
 #define CONFIG_BOARDNAME "P1020RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1020

scripts/config_whitelist.txt

@@ -3384,7 +3384,6 @@ CONFIG_OS_ENV_ADDR
 CONFIG_OTHBOOTARGS
 CONFIG_OVERWRITE_ETHADDR_ONCE
 CONFIG_P1020
-CONFIG_P1020RDB_PC
 CONFIG_P1020RDB_PD
 CONFIG_P1020UTM
 CONFIG_P1021