|
@@ -56,7 +56,7 @@ Compile U-Boot
|
|
|
Compile ARM Trusted Firmware (ATF)
|
|
|
==================================
|
|
|
|
|
|
- > cd ~/hikey/src/atf
|
|
|
+ > cd ~/hikey/src/arm-trusted-firmware
|
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
|
|
BL30=~/hikey/bin/mcuimage.bin \
|
|
|
BL33=~/hikey/bin/u-boot.bin DEBUG=1 PLAT=hikey
|
|
@@ -67,10 +67,10 @@ Copy resulting binaries
|
|
|
|
|
|
Compile l-loader
|
|
|
===============
|
|
|
- > cd ~/hikey/l-loader
|
|
|
+ > cd ~/hikey/src/l-loader
|
|
|
> make BL1=~/hikey/bin/bl1.bin all
|
|
|
> cp *.img ~/hikey/bin
|
|
|
- > cp l-loader.bin ~/hikey.bin
|
|
|
+ > cp l-loader.bin ~/hikey/bin
|
|
|
|
|
|
These instructions are adapted from
|
|
|
https://github.com/96boards/documentation/wiki/HiKeyUEFI
|
|
@@ -82,7 +82,7 @@ FLASHING
|
|
|
the hisi-idt.py utility.
|
|
|
|
|
|
The command below assumes HiKey enumerated as the first USB serial port
|
|
|
- > sudo ~/hikey/burn_boot/hisi-idt.py -d /dev/ttyUSB0 --img1=~/hikey/bin/l-loader.bin
|
|
|
+ > sudo ~/hikey/src/burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=~/hikey/bin/l-loader.bin
|
|
|
|
|
|
2. Once LED 0 comes on solid, HiKey board should be detected as a fastboot device by plugging a USB A to mini B
|
|
|
cable from your PC to the USB OTG port of HiKey (on some boards I've found this to be unreliable).
|