Эх сурвалжийг харах

ARM: AM335x: mux: change mmc0 cd pinmux from mmc0_sdcd to gpio

Currently omap_hsmmc driver doesn't use sdcd pin to detect
whether the card is present or not. Instead the same pin is used
as GPIO to detect card presence. So change the pin mux mode from
mmc0_sdcd to gpio0_6.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Mugunthan V N 9 жил өмнө
parent
commit
9f13b6d147
1 өөрчлөгдсөн 1 нэмэгдсэн , 1 устгасан
  1. 1 1
      board/ti/am335x/mux.c

+ 1 - 1
board/ti/am335x/mux.c

@@ -65,7 +65,7 @@ static struct module_pin_mux mmc0_pin_mux[] = {
 	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
 	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
 	{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)},		/* MMC0_WP */
-	{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)},	/* MMC0_CD */
+	{OFFSET(spi0_cs1), (MODE(7) | RXACTIVE | PULLUP_EN)},	/* GPIO0_6 */
 	{-1},
 };