powerpc: Fix CamelCase checkpatch warnings

85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions.
because of this code checkpatch script generates "WARNING: Avoid CamelCase".

Convert variables name to normal naming convention and modify board, driver
files with updated the new structure.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>

arch/powerpc/cpu/mpc85xx/cpu.c

@@ -135,78 +135,79 @@ int checkcpu (void)
 		if (!(i & 3))
 			printf ("\n       ");
 		printf("CPU%d:%-4s MHz, ", core,
-			strmhz(buf1, sysinfo.freqProcessor[core]));
+			strmhz(buf1, sysinfo.freq_processor[core]));
 	}
-	printf("\n       CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("\n       CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
+	printf("\n");
 
 #ifdef CONFIG_FSL_CORENET
 	if (ddr_sync == 1) {
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Synchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 	} else {
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Asynchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 	}
 #else
 	switch (ddr_ratio) {
 	case 0x0:
 		printf("       DDR:%-4s MHz (%s MT/s data rate), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	case 0x7:
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Synchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	default:
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Asynchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	}
 #endif
 
 #if defined(CONFIG_FSL_LBC)
-	if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
-		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 	} else {
 		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
-		       sysinfo.freqLocalBus);
+		       sysinfo.freq_localbus);
 	}
 #endif
 
 #if defined(CONFIG_FSL_IFC)
-	printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 #endif
 
 #ifdef CONFIG_CPM2
-	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
 #endif
 
 #ifdef CONFIG_QE
-	printf("       QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
+	printf("       QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
 		printf("       FMAN%d: %s MHz\n", i + 1,
-			strmhz(buf1, sysinfo.freqFMan[i]));
+			strmhz(buf1, sysinfo.freq_fman[i]));
 	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
 #endif
 
 #ifdef CONFIG_SYS_DPAA_PME
-	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
 #endif
 
 	puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");

arch/powerpc/cpu/mpc85xx/fdt.c

@@ -403,22 +403,22 @@ static void ft_fixup_dpaa_clks(void *blob)
 	get_sys_info(&sysinfo);
 #ifdef CONFIG_SYS_DPAA_FMAN
 	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
-			sysinfo.freqFMan[0]);
+			sysinfo.freq_fman[0]);
 
 #if (CONFIG_SYS_NUM_FMAN == 2)
 	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
-			sysinfo.freqFMan[1]);
+			sysinfo.freq_fman[1]);
 #endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	do_fixup_by_compat_u32(blob, "fsl,qman",
-			"clock-frequency", sysinfo.freqQMAN, 1);
+			"clock-frequency", sysinfo.freq_qman, 1);
 #endif
 
 #ifdef CONFIG_SYS_DPAA_PME
 	do_fixup_by_compat_u32(blob, "fsl,pme",
-		"clock-frequency", sysinfo.freqPME, 1);
+		"clock-frequency", sysinfo.freq_pme, 1);
 #endif
 }
 #else
@@ -616,7 +616,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 	while (off != -FDT_ERR_NOTFOUND) {
 		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-		val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+		val = cpu_to_fdt32(sysinfo.freq_processor[*reg]);
 		fdt_setprop(blob, off, "clock-frequency", &val, 4);
 		off = fdt_node_offset_by_prop_value(blob, off, "device_type",
 							"cpu", 4);

arch/powerpc/cpu/mpc85xx/speed.c

@@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 /* --------------------------------------------------------------- */
 
-void get_sys_info (sys_info_t * sysInfo)
+void get_sys_info(sys_info_t *sys_info)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #ifdef CONFIG_FSL_IFC
@@ -46,7 +46,7 @@ void get_sys_info (sys_info_t * sysInfo)
 		[14] = 3,	/* CC4 PPL / 4 */
 	};
 
-	const u8 core_cplx_PLL_div[16] = {
+	const u8 core_cplx_pll_div[16] = {
 		[ 0] = 1,	/* CC1 PPL / 1 */
 		[ 1] = 2,	/* CC1 PPL / 2 */
 		[ 2] = 4,	/* CC1 PPL / 4 */
@@ -60,26 +60,26 @@ void get_sys_info (sys_info_t * sysInfo)
 		[13] = 2,	/* CC4 PPL / 2 */
 		[14] = 4,	/* CC4 PPL / 4 */
 	};
-	uint i, freqCC_PLL[6], rcw_tmp;
+	uint i, freq_cc_pll[6], rcw_tmp;
 	uint ratio[6];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
 	uint mem_pll_rat;
 
-	sysInfo->freqSystemBus = sysclk;
+	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_DDR_CLK_FREQ
-	sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
 #else
-	sysInfo->freqDDRBus = sysclk;
+	sys_info->freq_ddrbus = sysclk;
 #endif
 
-	sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
+	sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
 	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
 			FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
 			& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
 	if (mem_pll_rat > 2)
-		sysInfo->freqDDRBus *= mem_pll_rat;
+		sys_info->freq_ddrbus *= mem_pll_rat;
 	else
-		sysInfo->freqDDRBus = sysInfo->freqSystemBus * mem_pll_rat;
+		sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat;
 
 	ratio[0] = (in_be32(&clk->pllc1gsr) >> 1) & 0x3f;
 	ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
@@ -89,9 +89,9 @@ void get_sys_info (sys_info_t * sysInfo)
 	ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
 	for (i = 0; i < 6; i++) {
 		if (ratio[i] > 4)
-			freqCC_PLL[i] = sysclk * ratio[i];
+			freq_cc_pll[i] = sysclk * ratio[i];
 		else
-			freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
+			freq_cc_pll[i] = sys_info->freq_systembus * ratio[i];
 	}
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 	/*
@@ -110,8 +110,8 @@ void get_sys_info (sys_info_t * sysInfo)
 			printf("Unsupported architecture configuration"
 				" in function %s\n", __func__);
 		cplx_pll += (cluster / 2) * 3;
-		sysInfo->freqProcessor[cpu] =
-			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+		sys_info->freq_processor[cpu] =
+			 freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
 #ifdef CONFIG_PPC_B4860
 #define FM1_CLK_SEL	0xe0000000
@@ -127,63 +127,63 @@ void get_sys_info (sys_info_t * sysInfo)
 #ifdef CONFIG_SYS_DPAA_PME
 	switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
 	case 1:
-		sysInfo->freqPME = freqCC_PLL[0];
+		sys_info->freq_pme = freq_cc_pll[0];
 		break;
 	case 2:
-		sysInfo->freqPME = freqCC_PLL[0] / 2;
+		sys_info->freq_pme = freq_cc_pll[0] / 2;
 		break;
 	case 3:
-		sysInfo->freqPME = freqCC_PLL[0] / 3;
+		sys_info->freq_pme = freq_cc_pll[0] / 3;
 		break;
 	case 4:
-		sysInfo->freqPME = freqCC_PLL[0] / 4;
+		sys_info->freq_pme = freq_cc_pll[0] / 4;
 		break;
 	case 6:
-		sysInfo->freqPME = freqCC_PLL[1] / 2;
+		sys_info->freq_pme = freq_cc_pll[1] / 2;
 		break;
 	case 7:
-		sysInfo->freqPME = freqCC_PLL[1] / 3;
+		sys_info->freq_pme = freq_cc_pll[1] / 3;
 		break;
 	default:
 		printf("Error: Unknown PME clock select!\n");
 	case 0:
-		sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+		sys_info->freq_pme = sys_info->freq_systembus / 2;
 		break;
 
 	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-	sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+	sys_info->freq_qman = sys_info->freq_systembus / 2;
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
 	case 1:
-		sysInfo->freqFMan[0] = freqCC_PLL[3];
+		sys_info->freq_fman[0] = freq_cc_pll[3];
 		break;
 	case 2:
-		sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+		sys_info->freq_fman[0] = freq_cc_pll[3] / 2;
 		break;
 	case 3:
-		sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+		sys_info->freq_fman[0] = freq_cc_pll[3] / 3;
 		break;
 	case 4:
-		sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+		sys_info->freq_fman[0] = freq_cc_pll[3] / 4;
 		break;
 	case 5:
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+		sys_info->freq_fman[0] = sys_info->freq_systembus;
 		break;
 	case 6:
-		sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+		sys_info->freq_fman[0] = freq_cc_pll[4] / 2;
 		break;
 	case 7:
-		sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+		sys_info->freq_fman[0] = freq_cc_pll[4] / 3;
 		break;
 	default:
 		printf("Error: Unknown FMan1 clock select!\n");
 	case 0:
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
 		break;
 	}
 #if (CONFIG_SYS_NUM_FMAN) == 2
@@ -192,27 +192,27 @@ void get_sys_info (sys_info_t * sysInfo)
 	rcw_tmp = in_be32(&gur->rcwsr[15]);
 	switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
 	case 1:
-		sysInfo->freqFMan[1] = freqCC_PLL[4];
+		sys_info->freq_fman[1] = freq_cc_pll[4];
 		break;
 	case 2:
-		sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+		sys_info->freq_fman[1] = freq_cc_pll[4] / 2;
 		break;
 	case 3:
-		sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+		sys_info->freq_fman[1] = freq_cc_pll[4] / 3;
 		break;
 	case 4:
-		sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+		sys_info->freq_fman[1] = freq_cc_pll[4] / 4;
 		break;
 	case 6:
-		sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+		sys_info->freq_fman[1] = freq_cc_pll[3] / 2;
 		break;
 	case 7:
-		sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+		sys_info->freq_fman[1] = freq_cc_pll[3] / 3;
 		break;
 	default:
 		printf("Error: Unknown FMan2 clock select!\n");
 	case 0:
-		sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
 		break;
 	}
 #endif	/* CONFIG_SYS_NUM_FMAN == 2 */
@@ -225,8 +225,8 @@ void get_sys_info (sys_info_t * sysInfo)
 				& 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
 
-		sysInfo->freqProcessor[cpu] =
-			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+		sys_info->freq_processor[cpu] =
+			 freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
 #define PME_CLK_SEL	0x80000000
 #define FM1_CLK_SEL	0x40000000
@@ -246,43 +246,43 @@ void get_sys_info (sys_info_t * sysInfo)
 #ifdef CONFIG_SYS_DPAA_PME
 	if (rcw_tmp & PME_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
-			sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4;
+			sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 4;
 		else
-			sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2;
+			sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 2;
 	} else {
-		sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+		sys_info->freq_pme = sys_info->freq_systembus / 2;
 	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	if (rcw_tmp & FM1_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
-			sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4;
+			sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 4;
 		else
-			sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2;
+			sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 2;
 	} else {
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
 	}
 #if (CONFIG_SYS_NUM_FMAN) == 2
 	if (rcw_tmp & FM2_CLK_SEL) {
 		if (rcw_tmp & HWA_ASYNC_DIV)
-			sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4;
+			sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 4;
 		else
-			sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2;
+			sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 2;
 	} else {
-		sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+		sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
 	}
 #endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-	sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+	sys_info->freq_qman = sys_info->freq_systembus / 2;
 #endif
 
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 #else /* CONFIG_FSL_CORENET */
-	uint plat_ratio, e500_ratio, half_freqSystemBus;
+	uint plat_ratio, e500_ratio, half_freq_systembus;
 	int i;
 #ifdef CONFIG_QE
 	__maybe_unused u32 qe_ratio;
@@ -290,40 +290,40 @@ void get_sys_info (sys_info_t * sysInfo)
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
-	sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+	sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
 
 	/* Divide before multiply to avoid integer
 	 * overflow for processor speeds above 2GHz */
-	half_freqSystemBus = sysInfo->freqSystemBus/2;
+	half_freq_systembus = sys_info->freq_systembus/2;
 	for (i = 0; i < cpu_numcores(); i++) {
 		e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
-		sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
+		sys_info->freq_processor[i] = e500_ratio * half_freq_systembus;
 	}
 
-	/* Note: freqDDRBus is the MCLK frequency, not the data rate. */
-	sysInfo->freqDDRBus = sysInfo->freqSystemBus;
+	/* Note: freq_ddrbus is the MCLK frequency, not the data rate. */
+	sys_info->freq_ddrbus = sys_info->freq_systembus;
 
 #ifdef CONFIG_DDR_CLK_FREQ
 	{
 		u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
 			>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 		if (ddr_ratio != 0x7)
-			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+			sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
 #endif
 
 #ifdef CONFIG_QE
 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
-	sysInfo->freqQE =  sysInfo->freqSystemBus;
+	sys_info->freq_qe =  sys_info->freq_systembus;
 #else
 	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
 			>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
-	sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
+	sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ;
 #endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-		sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+		sys_info->freq_fman[0] = sys_info->freq_systembus;
 #endif
 
 #endif /* CONFIG_FSL_CORENET */
@@ -350,10 +350,10 @@ void get_sys_info (sys_info_t * sysInfo)
 		 */
 		lcrr_div *= 2;
 #endif
-		sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
+		sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div;
 	} else {
 		/* In case anyone cares what the unknown value is */
-		sysInfo->freqLocalBus = lcrr_div;
+		sys_info->freq_localbus = lcrr_div;
 	}
 #endif
 
@@ -361,7 +361,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	ccr = in_be32(&ifc_regs->ifc_ccr);
 	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
 
-	sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
 #endif
 }
 
@@ -382,13 +382,13 @@ int get_clocks (void)
 	dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
 #endif
 	get_sys_info (&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor[0];
-	gd->bus_clk = sys_info.freqSystemBus;
-	gd->mem_clk = sys_info.freqDDRBus;
-	gd->arch.lbc_clk = sys_info.freqLocalBus;
+	gd->cpu_clk = sys_info.freq_processor[0];
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->mem_clk = sys_info.freq_ddrbus;
+	gd->arch.lbc_clk = sys_info.freq_localbus;
 
 #ifdef CONFIG_QE
-	gd->arch.qe_clk = sys_info.freqQE;
+	gd->arch.qe_clk = sys_info.freq_qe;
 	gd->arch.brg_clk = gd->arch.qe_clk / 2;
 #endif
 	/*
@@ -400,7 +400,7 @@ int get_clocks (void)
 	 */
 #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
 	defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
-	gd->arch.i2c1_clk = sys_info.freqSystemBus;
+	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #elif defined(CONFIG_MPC8544)
 	/*
 	 * On the 8544, the I2C clock is the same as the SEC clock.  This can be
@@ -410,12 +410,12 @@ int get_clocks (void)
 	 * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
 	 */
 	if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
-		gd->arch.i2c1_clk = sys_info.freqSystemBus / 3;
+		gd->arch.i2c1_clk = sys_info.freq_systembus / 3;
 	else
-		gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+		gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #else
 	/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
-	gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #endif
 	gd->arch.i2c2_clk = gd->arch.i2c1_clk;
 
@@ -429,7 +429,7 @@ int get_clocks (void)
 #endif /* defined(CONFIG_FSL_ESDHC) */
 
 #if defined(CONFIG_CPM2)
-	gd->arch.vco_out = 2*sys_info.freqSystemBus;
+	gd->arch.vco_out = 2*sys_info.freq_systembus;
 	gd->arch.cpm_clk = gd->arch.vco_out / 2;
 	gd->arch.scc_clk = gd->arch.vco_out / 4;
 	gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));

arch/powerpc/cpu/mpc86xx/cpu.c

@@ -72,17 +72,17 @@ checkcpu(void)
 	get_sys_info(&sysinfo);
 
 	puts("Clock Configuration:\n");
-	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
-	printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freq_processor));
+	printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
 	printf("       DDR:%-4s MHz (%s MT/s data rate), ",
-		strmhz(buf1, sysinfo.freqSystemBus / 2),
-		strmhz(buf2, sysinfo.freqSystemBus));
+		strmhz(buf1, sysinfo.freq_systembus / 2),
+		strmhz(buf2, sysinfo.freq_systembus));
 
-	if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
-		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 	} else {
 		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
-		       sysinfo.freqLocalBus);
+		       sysinfo.freq_localbus);
 	}
 
 	puts("L1:    D-cache 32 KB enabled\n");
@@ -131,7 +131,7 @@ get_tbclk(void)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	return (sys_info.freqSystemBus + 3L) / 4L;
+	return (sys_info.freq_systembus + 3L) / 4L;
 }
 
 

arch/powerpc/cpu/mpc86xx/speed.c

@@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* used in some defintiions of CONFIG_SYS_CLK_FREQ */
 extern unsigned long get_board_sys_clk(unsigned long dummy);
 
-void get_sys_info(sys_info_t *sysInfo)
+void get_sys_info(sys_info_t *sys_info)
 {
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -31,7 +31,7 @@ void get_sys_info(sys_info_t *sysInfo)
 
 	switch (plat_ratio) {
 	case 0x0:
-		sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
+		sys_info->freq_systembus = 16 * CONFIG_SYS_CLK_FREQ;
 		break;
 	case 0x02:
 	case 0x03:
@@ -43,10 +43,10 @@ void get_sys_info(sys_info_t *sysInfo)
 	case 0x0a:
 	case 0x0c:
 	case 0x10:
-		sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+		sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
 		break;
 	default:
-		sysInfo->freqSystemBus = 0;
+		sys_info->freq_systembus = 0;
 		break;
 	}
 
@@ -55,25 +55,26 @@ void get_sys_info(sys_info_t *sysInfo)
 
 	switch (e600_ratio) {
 	case 0x10:
-		sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 2 * sys_info->freq_systembus;
 		break;
 	case 0x19:
-		sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 5 * sys_info->freq_systembus / 2;
 		break;
 	case 0x20:
-		sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 3 * sys_info->freq_systembus;
 		break;
 	case 0x39:
-		sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 7 * sys_info->freq_systembus / 2;
 		break;
 	case 0x28:
-		sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 4 * sys_info->freq_systembus;
 		break;
 	case 0x1d:
-		sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 9 * sys_info->freq_systembus / 2;
 		break;
 	default:
-		sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
+		sys_info->freq_processor = e600_ratio +
+						sys_info->freq_systembus;
 		break;
 	}
 
@@ -84,10 +85,11 @@ void get_sys_info(sys_info_t *sysInfo)
 	lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-		sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
+		sys_info->freq_localbus = sys_info->freq_systembus
+							/ (lcrr_div * 2);
 	} else {
 		/* In case anyone cares what the unknown value is */
-		sysInfo->freqLocalBus = lcrr_div;
+		sys_info->freq_localbus = lcrr_div;
 	}
 }
 
@@ -102,9 +104,9 @@ int get_clocks(void)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor;
-	gd->bus_clk = sys_info.freqSystemBus;
-	gd->arch.lbc_clk = sys_info.freqLocalBus;
+	gd->cpu_clk = sys_info.freq_processor;
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->arch.lbc_clk = sys_info.freq_localbus;
 
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,
@@ -114,9 +116,9 @@ int get_clocks(void)
 	 * AN2919.
 	 */
 #ifdef CONFIG_MPC8610
-	gd->arch.i2c1_clk = sys_info.freqSystemBus;
+	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #else
-	gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #endif
 	gd->arch.i2c2_clk = gd->arch.i2c1_clk;
 
@@ -138,7 +140,7 @@ ulong get_bus_freq(ulong dummy)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	val = sys_info.freqSystemBus;
+	val = sys_info.freq_systembus;
 
 	return val;
 }

board/freescale/mpc8540ads/mpc8540ads.c

@@ -68,7 +68,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */

board/freescale/mpc8541cds/mpc8541cds.c

@@ -250,7 +250,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */

board/freescale/mpc8555cds/mpc8555cds.c

@@ -248,7 +248,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */

board/freescale/mpc8560ads/mpc8560ads.c

@@ -273,7 +273,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */

board/freescale/p1_p2_rdb_pc/ddr.c

@@ -247,7 +247,7 @@ phys_size_t fixed_sdram(void)
 
 	get_sys_info(&sysinfo);
 	printf("Configuring DDR for %s MT/s data rate\n",
-			strmhz(buf, sysinfo.freqDDRBus));
+			strmhz(buf, sysinfo.freq_ddrbus));
 
 	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 

board/freescale/p1_twr/ddr.c

@@ -53,7 +53,7 @@ phys_size_t fixed_sdram(void)
 
 	get_sys_info(&sysinfo);
 	printf("Configuring DDR for %s MT/s data rate\n",
-			strmhz(buf, sysinfo.freqDDRBus));
+			strmhz(buf, sysinfo.freq_ddrbus));
 
 	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 

board/sbc8548/sbc8548.c

@@ -65,8 +65,8 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 
-	lbc_mhz = sysinfo.freqLocalBus / 1000000;
-	clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus;
+	lbc_mhz = sysinfo.freq_localbus / 1000000;
+	clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus;
 
 	debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);
 

board/socrates/socrates.c

@@ -143,7 +143,7 @@ void local_bus_init (void)
 
 	get_sys_info (&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	/* Disable PLL bypass for Local Bus Clock >= 66 MHz */
 	if (lbc_mhz >= 66)

board/xes/xpedite537x/ddr.c

@@ -210,7 +210,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	unsigned int datarate;
 
 	get_sys_info(&sysinfo);
-	datarate = sysinfo.freqDDRBus / 1000 / 1000;
+	datarate = sysinfo.freq_ddrbus / 1000 / 1000;
 
 	for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
 		if ((bopts[i].datarate_mhz_low <= datarate) &&

drivers/spi/fsl_espi.c

@@ -75,7 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 
 	/* Set eSPI BRG clock source */
 	get_sys_info(&sysinfo);
-	spibrg = sysinfo.freqSystemBus / 2;
+	spibrg = sysinfo.freq_systembus / 2;
 	fsl->div16 = 0;
 	if ((spibrg / max_hz) > 32) {
 		fsl->div16 = ESPI_CSMODE_DIV16;

include/e500.h

@@ -10,19 +10,19 @@
 
 typedef struct
 {
-  unsigned long freqProcessor[CONFIG_MAX_CPUS];
-  unsigned long freqSystemBus;
-  unsigned long freqDDRBus;
-  unsigned long freqLocalBus;
-  unsigned long freqQE;
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_localbus;
+	unsigned long freq_qe;
 #ifdef CONFIG_SYS_DPAA_FMAN
-  unsigned long freqFMan[CONFIG_SYS_NUM_FMAN];
+	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
 #endif
 #ifdef CONFIG_SYS_DPAA_QBMAN
-  unsigned long freqQMAN;
+	unsigned long freq_qman;
 #endif
 #ifdef CONFIG_SYS_DPAA_PME
-  unsigned long freqPME;
+	unsigned long freq_pme;
 #endif
 } MPC85xx_SYS_INFO;
 

include/mpc86xx.h

@@ -41,9 +41,9 @@
 #ifndef __ASSEMBLY__
 
 typedef struct {
-	unsigned long freqProcessor;
-	unsigned long freqSystemBus;
-	unsigned long freqLocalBus;
+	unsigned long freq_processor;
+	unsigned long freq_systembus;
+	unsigned long freq_localbus;
 } MPC86xx_SYS_INFO;
 
 #define l1icache_enable	icache_enable