board/t208x: update t2080qds/t2080rdb for errata A-007186

As errata A-007186, we need to use the alternate serdes
protocol instead of those impacted protocols.

- add support for serdes protocols: 0x1b, 0x50, 0x5e,
  0x64, 0x6a, 0xd2, 0x67, 0x70.
- update t2080_rcw.cfg to adapt to new rcw_66_15 for
  t2080qds and t2080rdb.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

arch/powerpc/cpu/mpc85xx/t2080_serdes.c

@@ -43,6 +43,10 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 	{0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10,
 		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x1B, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
 	{0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
 		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
@@ -59,18 +63,34 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
 		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x50, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
 	{0x51, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
 		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
 		PCIE4, SGMII_FM1_DTSEC4,
 		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x5E, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
 	{0x5F, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
 		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
 		PCIE4, SGMII_FM1_DTSEC4,
 		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x64, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
 	{0x65, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
 		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
 		PCIE4, SGMII_FM1_DTSEC4,
 		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x6A, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM1_MAC1, XFI_FM1_MAC2,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
 	{0x6B, {XFI_FM1_MAC9, XFI_FM1_MAC10,
 		XFI_FM1_MAC1, XFI_FM1_MAC2,
 		PCIE4, SGMII_FM1_DTSEC4,
@@ -115,6 +135,9 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 	{0xD9, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
 		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
 		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xD2, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
 	{0xD3, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
 		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
 		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
@@ -127,8 +150,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 	{0x66, {XFI_FM1_MAC9, XFI_FM1_MAC10,
 		XFI_FM1_MAC1, XFI_FM1_MAC2,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
-
-#if defined(CONFIG_PPC_T2081)
 	{0xAA, {PCIE3, PCIE3, PCIE3, PCIE3,
 		PCIE4, PCIE4, PCIE4, PCIE4} },
 	{0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
@@ -137,7 +158,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 	{0x70, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1,
 		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
 		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
-#endif
 	{}
 };
 

board/freescale/t208xqds/eth_t208xqds.c

@@ -416,6 +416,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR);
 
 	switch (srds_s1) {
+	case 0x1b:
 	case 0x1c:
 	case 0x95:
 	case 0xa2:
@@ -429,8 +430,11 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
+	case 0x50:
 	case 0x51:
+	case 0x5e:
 	case 0x5f:
+	case 0x64:
 	case 0x65:
 		/* T2080QDS: XAUI/HiGig in Slot3;  T2081QDS: in Slot2 */
 		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
@@ -439,6 +443,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
 	case 0x66:
+	case 0x67:
 		/*
 		 * XFI does not need a PHY to work, but to avoid U-boot use
 		 * default PHY address which is zero to a MAC when it found
@@ -453,6 +458,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_10GEC3, 6);
 		fm_info_set_phy_address(FM1_10GEC4, 7);
 		break;
+	case 0x6a:
 	case 0x6b:
 		fm_info_set_phy_address(FM1_10GEC1, 4);
 		fm_info_set_phy_address(FM1_10GEC2, 5);
@@ -470,6 +476,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
+	case 0x70:
 	case 0x71:
 		/* SGMII in Slot3 */
 		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
@@ -625,6 +632,7 @@ int board_eth_init(bd_t *bis)
 			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 
 			if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) ||
+			    (srds_s1 == 0x6a) || (srds_s1 == 0x70) ||
 			    (srds_s1 == 0x6c) || (srds_s1 == 0x6d) ||
 			    (srds_s1 == 0x71)) {
 				/* As XFI is in cage intead of a slot, so

board/freescale/t208xqds/t2080_rcw.cfg

@@ -3,6 +3,6 @@ aa55aa55 010e0100
 #SerDes Protocol: 0x66_0x16
 #Core/DDR: 1533Mhz/2133MT/s
 12100017 15000000 00000000 00000000
-66160002 00008400 e8104000 c1000000
+66150002 00008400 e8104000 c1000000
 00000000 00000000 00000000 000307fc
 00000000 00000000 00000000 00000004

board/freescale/t208xqds/t208xqds.c

@@ -105,6 +105,7 @@ int brd_mux_lane_to_slot(void)
 		/* SerDes1 is not enabled */
 		break;
 #if defined(CONFIG_T2080QDS)
+	case 0x1b:
 	case 0x1c:
 	case 0xa2:
 		/* SD1(A:D) => SLOT3 SGMII
@@ -126,6 +127,7 @@ int brd_mux_lane_to_slot(void)
 		 */
 		QIXIS_WRITE(brdcfg[12], 0x3a);
 		break;
+	case 0x50:
 	case 0x51:
 		/* SD1(A:D) => SLOT3 XAUI
 		 * SD1(E)   => SLOT1 PCIe4
@@ -140,6 +142,7 @@ int brd_mux_lane_to_slot(void)
 		 */
 		QIXIS_WRITE(brdcfg[12], 0xfe);
 		break;
+	case 0x6a:
 	case 0x6b:
 		/* SD1(A:D) => XFI cage
 		 * SD1(E)   => SLOT1 PCIe4
@@ -184,6 +187,7 @@ int brd_mux_lane_to_slot(void)
 		 QIXIS_WRITE(brdcfg[12], 0x1a);
 		 break;
 #elif defined(CONFIG_T2081QDS)
+	case 0x50:
 	case 0x51:
 		/* SD1(A:D) => SLOT2 XAUI
 		 * SD1(E)   => SLOT1 PCIe4 x1
@@ -192,6 +196,7 @@ int brd_mux_lane_to_slot(void)
 		QIXIS_WRITE(brdcfg[12], 0x98);
 		QIXIS_WRITE(brdcfg[13], 0x70);
 		break;
+	case 0x6a:
 	case 0x6b:
 		/* SD1(A:D) => XFI SFP Module
 		 * SD1(E)   => SLOT1 PCIe4 x1
@@ -201,13 +206,6 @@ int brd_mux_lane_to_slot(void)
 		QIXIS_WRITE(brdcfg[13], 0x70);
 		break;
 	case 0x6c:
-		/* SD1(A:B) => XFI SFP Module
-		 * SD1(C:D) => SLOT2 SGMII
-		 * SD1(E:H) => SLOT1 PCIe4 x4
-		 */
-		QIXIS_WRITE(brdcfg[12], 0xe8);
-		QIXIS_WRITE(brdcfg[13], 0x0);
-		break;
 	case 0x6d:
 		/* SD1(A:B) => XFI SFP Module
 		 * SD1(C:D) => SLOT2 SGMII

board/freescale/t208xrdb/t2080_rcw.cfg

@@ -3,6 +3,6 @@ aa55aa55 010e0100
 #SerDes Protocol: 0x66_0x16
 #Core/DDR: 1533Mhz/1600MT/s
 120c0017 15000000 00000000 00000000
-66160002 00008400 ec104000 c1000000
+66150002 00008400 ec104000 c1000000
 00000000 00000000 00000000 000307fc
 00000000 00000000 00000000 00000004