sandbox: dts: add sandbox_pmic.dtsi and include it to sandbox.dts and test.dts

This commit adds dtsi file for Sandbox PMIC.
It fully describes the PMIC by:
- i2c emul node - with a default settings of 16 registers
- 2x buck regulator nodes
- 2x ldo regulator nodes

The default register settings are set with preprocessor macros:
- VAL2REG(min[uV/uA], step[uV/uA], val[uV/uA])
- VAL2OMREG(mode id)
Both defined in file:
- include/dt-bindings/pmic/sandbox_pmic.h

The Voltage ranges of each regulator can be found in:
- include/power/sandbox_pmic.h

The new file is included into:
- sandbox.dts
- test.dts

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>

arch/sandbox/dts/sandbox.dts

@@ -115,6 +115,9 @@
 				compatible = "sandbox,i2c-rtc";
 			};
 		};
+		sandbox_pmic: sandbox_pmic {
+			reg = <0x40>;
+		};
 	};
 
 	spi@0 {
@@ -205,3 +208,4 @@
 };
 
 #include "cros-ec-keyboard.dtsi"
+#include "sandbox_pmic.dtsi"

arch/sandbox/dts/sandbox_pmic.dtsi

@@ -0,0 +1,78 @@
+/*
+ *  Sandbox PMIC dts node
+ *
+ *  Copyright (C) 2015 Samsung Electronics
+ *  Przemyslaw Marczak  <p.marczak@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dt-bindings/pmic/sandbox_pmic.h>
+
+&sandbox_pmic {
+	compatible = "sandbox,pmic";
+
+	pmic_emul {
+		compatible = "sandbox,i2c-pmic";
+
+		/*
+		 * Default PMICs register values are set by macro
+		 * VAL2REG(min, step, value) [uV/uA]
+		 * VAL2OMREG(mode id)
+		 * reg-defaults - byte array
+		 */
+		reg-defaults = /bits/ 8 <
+			/* BUCK1 */
+			VAL2REG(800000, 25000, 1000000)
+			VAL2REG(150000, 25000, 150000)
+			VAL2OMREG(BUCK_OM_OFF)
+			/* BUCK2 */
+			VAL2REG(750000, 50000, 3000000)
+			VAL2REG(150000, 25000, 150000)
+			VAL2OMREG(0)
+			/* LDO1 */
+			VAL2REG(800000, 25000, 1600000)
+			VAL2REG(100000, 50000, 150000)
+			VAL2OMREG(LDO_OM_OFF)
+			/* LDO2 */
+			VAL2REG(750000, 50000, 3000000)
+			VAL2REG(150000, 25000, 150000)
+			VAL2OMREG(0)
+			/* reg[12:15] - not used */
+			0x00
+			0x00
+			0x00
+			0x00
+		>;
+	};
+
+	buck1 {
+		regulator-name = "SUPPLY_1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microamp = <200000>;
+		regulator-max-microamp = <200000>;
+		regulator-always-on;
+	};
+
+	buck2 {
+		regulator-name = "SUPPLY_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ldo1 {
+		regulator-name = "VDD_EMMC_1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microamp = <100000>;
+		regulator-max-microamp = <100000>;
+		regulator-boot-on;
+	};
+
+	ldo2 {
+		regulator-name = "VDD_LCD_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};

arch/sandbox/dts/test.dts

@@ -139,6 +139,10 @@
 				sandbox,size = <256>;
 			};
 		};
+
+		sandbox_pmic: sandbox_pmic {
+			reg = <0x40>;
+		};
 	};
 
 	pci: pci-controller {
@@ -228,3 +232,5 @@
 	};
 
 };
+
+#include "sandbox_pmic.dtsi"

include/dt-bindings/pmic/sandbox_pmic.h

@@ -0,0 +1,35 @@
+/*
+ *  Copyright (C) 2015 Samsung Electronics
+ *  Przemyslaw Marczak  <p.marczak@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_SANDBOX_PMIC_H_
+#define _DT_BINDINGS_SANDBOX_PMIC_H_
+
+/*
+ * Sandbox PMIC - prepare reset values
+ * To provide the default (reset) values as in the real hardware,
+ * the registers are set in i2c pmic emul driver's probe() method.
+ * The default values are defined as below.
+ */
+
+/* Buck operation mode IDs */
+#define BUCK_OM_OFF	0
+#define BUCK_OM_ON	1
+#define BUCK_OM_PWM	2
+#define BUCK_OM_COUNT	3
+
+/* Ldo operation mode IDs */
+#define LDO_OM_OFF	0
+#define LDO_OM_ON	1
+#define LDO_OM_SLEEP	2
+#define LDO_OM_STANDBY	3
+#define LDO_OM_COUNT	4
+
+/* [Value uV/uA]/[Mode ID] to register */
+#define VAL2REG(min, step, val)		(((val) - (min)) / (step))
+#define VAL2OMREG(x)			(x)
+
+#endif