TI: Drop 'CONFIG_OMAP'

In the two cases in the code where we use CONFIG_OMAP as a useful test
currently we can make use of CONFIG_ARCH_OMAP2PLUS instead.  With that
changed we can drop all defines of CONFIG_OMAP.  While in here,
CONFIG_OMAP3430 is only defined and then never used, so drop.

Signed-off-by: Tom Rini <trini@konsulko.com>

arch/arm/include/asm/spl.h

@@ -7,7 +7,7 @@
 #ifndef	_ASM_SPL_H_
 #define	_ASM_SPL_H_
 
-#if defined(CONFIG_OMAP) \
+#if defined(CONFIG_ARCH_OMAP2PLUS) \
 	|| defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
 	|| defined(CONFIG_EXYNOS4210)
 /* Platform-specific defines */

drivers/serial/ns16550.c

@@ -175,21 +175,17 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 		;
 
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
-			defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+#if defined(CONFIG_ARCH_OMAP2PLUS)
 	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
 #endif
 	serial_out(UART_MCRVAL, &com_port->mcr);
 	serial_out(ns16550_getfcr(com_port), &com_port->fcr);
 	if (baud_divisor != -1)
 		NS16550_setbrg(com_port, baud_divisor);
-#if defined(CONFIG_OMAP) || \
-	defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
-	defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
-
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX)
 	/* /16 is proper to hit 115200 with 48MHz */
 	serial_out(0, &com_port->mdr1);
-#endif /* CONFIG_OMAP */
+#endif
 #if defined(CONFIG_SOC_KEYSTONE)
 	serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
 #endif

include/configs/am3517_crane.h

@@ -16,7 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP3_AM3517CRANE	1	/* working with CRANEBOARD */
 
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */

include/configs/am3517_evm.h

@@ -13,10 +13,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* High Level Configuration Options */
-
-#define CONFIG_OMAP
-
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */

include/configs/bur_am335x_common.h

@@ -13,7 +13,6 @@
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
 #define CONFIG_AM33XX
-#define CONFIG_OMAP
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
 /* Timer information */

include/configs/cm_t35.h

@@ -22,7 +22,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP	/* in a TI OMAP core */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_CM_T3X	/* working with CM-T35 and CM-T3730 */
 

include/configs/cm_t3517.h

@@ -13,7 +13,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP	/* in a TI OMAP core */
 #define CONFIG_CM_T3517	/* working with CM-T3517 */
 
 #define CONFIG_SYS_TEXT_BASE	0x80008000

include/configs/kc1.h

@@ -26,8 +26,6 @@
 /*
  * Platform
  */
-
-#define CONFIG_OMAP
 #define CONFIG_OMAP4430
 
 /*

include/configs/mcx.h

@@ -12,7 +12,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP			/* in a TI OMAP core */
 #define CONFIG_OMAP3_MCX		/* working with mcx */
 #define CONFIG_OMAP_GPIO
 

include/configs/nokia_rx51.h

@@ -22,9 +22,6 @@
 /*
  * High Level Configuration Options
  */
-
-#define CONFIG_OMAP			/* in a TI OMAP core */
-#define CONFIG_OMAP3430			/* which is in a 3430 */
 #define CONFIG_OMAP3_RX51		/* working with RX51 */
 #define CONFIG_SYS_L2CACHE_OFF		/* pretend there is no L2 CACHE */
 

include/configs/omap3_evm.h

@@ -83,7 +83,6 @@
 /*
  * High level configuration options
  */
-#define CONFIG_OMAP			/* This is TI OMAP core */
 #define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC			/* The chip has SDRC controller */

include/configs/siemens-am33x-common.h

@@ -15,7 +15,6 @@
 #define __CONFIG_SIEMENS_AM33X_COMMON_H
 
 #define CONFIG_AM33XX
-#define CONFIG_OMAP
 
 #include <asm/arch/omap.h>
 

include/configs/sniper.h

@@ -18,12 +18,6 @@
 
 #define CONFIG_ARM_ARCH_CP15_ERRATA
 
-/*
- * Platform
- */
-
-#define CONFIG_OMAP
-
 /*
  * Board
  */

include/configs/tam3517-common.h

@@ -13,7 +13,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP		/* in a TI OMAP core */
 #define CONFIG_OMAP_GPIO
 
 #define CONFIG_SYS_TEXT_BASE 0x80008000

include/configs/tao3530.h

@@ -16,8 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP			/* in a TI OMAP core */
-
 #define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC			/* Has an SDRC controller */

include/configs/ti814x_evm.h

@@ -18,7 +18,6 @@
 
 #define CONFIG_TI81XX
 #define CONFIG_TI814X
-#define CONFIG_OMAP
 
 #include <asm/arch/omap.h>
 

include/configs/ti816x_evm.h

@@ -12,7 +12,6 @@
 
 #define CONFIG_TI81XX
 #define CONFIG_TI816X
-#define CONFIG_OMAP
 
 #define CONFIG_ARCH_CPU_INIT
 

include/configs/ti_armv7_omap.h

@@ -12,9 +12,6 @@
 #ifndef __CONFIG_TI_ARMV7_OMAP_H__
 #define __CONFIG_TI_ARMV7_OMAP_H__
 
-/* Common defines for all OMAP architecture based SoCs */
-#define CONFIG_OMAP
-
 /* I2C IP block */
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1

include/configs/tricorder.h

@@ -16,9 +16,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* High Level Configuration Options */
-#define CONFIG_OMAP			/* in a TI OMAP core */
-
 #define CONFIG_MACH_TYPE		MACH_TYPE_TRICORDER
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM

scripts/config_whitelist.txt

@@ -1980,8 +1980,6 @@ CONFIG_OF_SPI
 CONFIG_OF_SPI_FLASH
 CONFIG_OF_STDOUT_PATH
 CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
-CONFIG_OMAP
-CONFIG_OMAP3430
 CONFIG_OMAP3_AM3517CRANE
 CONFIG_OMAP3_DEVKIT8000
 CONFIG_OMAP3_EVM