omap: Set appropriate cache configuration for LPAE and non-LAPE cases

Cache configuration methods is different for LPAE and non-LPAE cases.
Hence the bits and the interpretaion is different for two cases.
In case of non-LPAE mode short descriptor format is used and we need
to set Cache and Buffer bits.

In the case of LPAE the cache configuration happens via MAIR0 lookup.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

arch/arm/cpu/armv7/omap-common/omap-cache.c

@@ -17,7 +17,28 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define ARMV7_DCACHE_WRITEBACK  0xe
+/*
+ * Without LPAE short descriptors are used
+ * Set C - Cache Bit3
+ * Set B - Buffer Bit2
+ * The last 2 bits set to 0b10
+ * Do Not set XN bit4
+ * So value is 0xe
+ *
+ * With LPAE cache configuration happens via MAIR0 register
+ * AttrIndx value is 0x3 for picking byte3 for MAIR0 which has 0xFF.
+ * 0xFF maps to Cache writeback with Read and Write Allocate set
+ * The bits[1:0] should have the value 0b01 for the first level
+ * descriptor.
+ * So the value is 0xd
+ */
+
+#ifdef CONFIG_ARMV7_LPAE
+#define ARMV7_DCACHE_POLICY	DCACHE_WRITEALLOC
+#else
+#define ARMV7_DCACHE_POLICY	DCACHE_WRITEBACK & ~TTB_SECT_XN_MASK
+#endif
+
 #define ARMV7_DOMAIN_CLIENT	1
 #define ARMV7_DOMAIN_MASK	(0x3 << 0)
 
@@ -38,7 +59,7 @@ void dram_bank_mmu_setup(int bank)
 
 	debug("%s: bank: %d\n", __func__, bank);
 	for (i = start; i < end; i++)
-		set_section_dcache(i, ARMV7_DCACHE_WRITEBACK);
+		set_section_dcache(i, ARMV7_DCACHE_POLICY);
 }
 
 void arm_init_domains(void)