armv7: Add workaround for USB erratum A-009008

USB High Speed (HS) EYE Height Adjustment
USB HS speed eye diagram fails with the default value at
many corners, particularly at a high temperature

Optimal eye at TXREFTUNE value to 0x9 is observed, change
set the same value.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
[YS: Reordered Kconfig options]
Reviewed-by: York Sun <york.sun@nxp.com>

arch/arm/cpu/armv7/ls102xa/Kconfig

@@ -2,6 +2,7 @@ config ARCH_LS1021A
 	bool
 	select SYS_FSL_ERRATUM_A008378
 	select SYS_FSL_ERRATUM_A008407
+	select SYS_FSL_ERRATUM_A009008
 	select SYS_FSL_ERRATUM_A009663
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
@@ -58,6 +59,11 @@ config SYS_CCI400_OFFSET
 	  Offset for CCI400 base.
 	  CCI400 base addr = CCSRBAR + CCI400_OFFSET
 
+config SYS_FSL_ERRATUM_A009008
+	bool
+	help
+	  Workaround for USB PHY erratum A009008
+
 config SYS_FSL_ERRATUM_A010315
 	bool "Workaround for PCIe erratum A010315"
 

arch/arm/cpu/armv7/ls102xa/soc.c

@@ -60,6 +60,18 @@ unsigned int get_soc_major_rev(void)
 	return major;
 }
 
+static void erratum_a009008(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009008
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	clrsetbits_be32(scfg + SCFG_USB3PRM1CR / 4,
+			0xF << 6,
+			SCFG_USB_TXVREFTUNE << 6);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
+}
+
+
 void s_init(void)
 {
 }
@@ -147,6 +159,9 @@ int arch_soc_init(void)
 	 */
 	out_be32(&scfg->eddrtqcfg, 0x63b20042);
 
+	/* Erratum */
+	erratum_a009008();
+
 	return 0;
 }
 

arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h

@@ -174,6 +174,10 @@ struct ccsr_gur {
 #define SCFG_PMCINTECR_ETSECERRG1	0x00040000
 #define SCFG_CLUSTERPMCR_WFIL2EN	0x80000000
 
+#define SCFG_BASE			0x01570000
+#define SCFG_USB3PRM1CR			0x070
+#define SCFG_USB_TXVREFTUNE		0x9
+
 /* Supplemental Configuration Unit */
 struct ccsr_scfg {
 	u32 dpslpcr;