ARM: uniphier: drop unneeded EHCI pin mux settings

These pin mux settings are cared by the pinctrl drivers.
Remove the ad-hoc code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c

@@ -35,15 +35,6 @@ void ph1_ld4_pin_init(void)
 	sg_set_pinsel(31, 0, 8, 4);	/* MMCDAT7 -> NFD7_GB */
 #endif
 
-#ifdef CONFIG_USB_EHCI
-	sg_set_pinsel(53, 0, 8, 4);	/* USB0VBUS -> USB0VBUS */
-	sg_set_pinsel(54, 0, 8, 4);	/* USB0OD   -> USB0OD */
-	sg_set_pinsel(55, 0, 8, 4);	/* USB1VBUS -> USB1VBUS */
-	sg_set_pinsel(56, 0, 8, 4);	/* USB1OD   -> USB1OD */
-	/* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */
-	/* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */
-#endif
-
 	tmp = readl(SG_IECTRL);
 	tmp |= 0x41;
 	writel(tmp, SG_IECTRL);

arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c

@@ -40,12 +40,5 @@ void ph1_pro4_pin_init(void)
 	sg_set_pinsel(183, 0, 4, 8);	/* USB1OD   -> USB1OD */
 #endif
 
-#ifdef CONFIG_USB_EHCI
-	sg_set_pinsel(184, 0, 4, 8);	/* USB2VBUS -> USB2VBUS */
-	sg_set_pinsel(185, 0, 4, 8);	/* USB2OD   -> USB2OD */
-	sg_set_pinsel(187, 0, 4, 8);	/* USB3VBUS -> USB3VBUS */
-	sg_set_pinsel(188, 0, 4, 8);	/* USB3OD   -> USB3OD */
-#endif
-
 	writel(1, SG_LOADPINCTRL);
 }

arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c

@@ -32,13 +32,4 @@ void ph1_sld8_pin_init(void)
 	sg_set_pinsel(30, 0, 8, 4);	/* NFD6_GB -> NFD6_GB */
 	sg_set_pinsel(31, 0, 8, 4);	/* NFD7_GB -> NFD7_GB */
 #endif
-
-#ifdef CONFIG_USB_EHCI
-	sg_set_pinsel(41, 0, 8, 4);	/* USB0VBUS -> USB0VBUS */
-	sg_set_pinsel(42, 0, 8, 4);	/* USB0OD   -> USB0OD */
-	sg_set_pinsel(43, 0, 8, 4);	/* USB1VBUS -> USB1VBUS */
-	sg_set_pinsel(44, 0, 8, 4);	/* USB1OD   -> USB1OD */
-	/* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */
-	/* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */
-#endif
 }