Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

Makefile

@@ -263,6 +263,7 @@ LIBS-y += drivers/power/ \
 	drivers/power/battery/
 LIBS-y += drivers/spi/
 LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/
+LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 LIBS-y += drivers/serial/
 LIBS-y += drivers/usb/eth/
 LIBS-y += drivers/usb/gadget/

README

@@ -423,16 +423,50 @@ The following options need to be configured:
 		CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 		This value denotes start offset of DSP CCSR space.
 
-		CONFIG_SYS_FSL_DDR_EMU
-		Specify emulator support for DDR. Some DDR features such as
-		deskew training are not available.
-
 - Generic CPU options:
 		CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
 		Defines the endianess of the CPU. Implementation of those
 		values is arch specific.
 
+		CONFIG_SYS_FSL_DDR
+		Freescale DDR driver in use. This type of DDR controller is
+		found in mpc83xx, mpc85xx, mpc86xx as well as some ARM core
+		SoCs.
+
+		CONFIG_SYS_FSL_DDR_ADDR
+		Freescale DDR memory-mapped register base.
+
+		CONFIG_SYS_FSL_DDR_EMU
+		Specify emulator support for DDR. Some DDR features such as
+		deskew training are not available.
+
+		CONFIG_SYS_FSL_DDRC_GEN1
+		Freescale DDR1 controller.
+
+		CONFIG_SYS_FSL_DDRC_GEN2
+		Freescale DDR2 controller.
+
+		CONFIG_SYS_FSL_DDRC_GEN3
+		Freescale DDR3 controller.
+
+		CONFIG_SYS_FSL_DDRC_ARM_GEN3
+		Freescale DDR3 controller for ARM-based SoCs.
+
+		CONFIG_SYS_FSL_DDR1
+		Board config to use DDR1. It can be enabled for SoCs with
+		Freescale DDR1 or DDR2 controllers, depending on the board
+		implemetation.
+
+		CONFIG_SYS_FSL_DDR2
+		Board config to use DDR2. It can be eanbeld for SoCs with
+		Freescale DDR2 or DDR3 controllers, depending on the board
+		implementation.
+
+		CONFIG_SYS_FSL_DDR3
+		Board config to use DDR3. It can be enabled for SoCs with
+		Freescale DDR3 controllers.
+
 - Intel Monahans options:
 		CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
 
@@ -3197,7 +3231,7 @@ FIT uImage format:
 
 		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 		Set for the SPL on PPC mpc8xxx targets, support for
-		arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary.
+		drivers/ddr/fsl/libddr.o in SPL binary.
 
 		CONFIG_SPL_COMMON_INIT_DDR
 		Set for common ddr init with serial presence detect in

arch/powerpc/cpu/mpc83xx/Makefile

@@ -38,11 +38,11 @@ obj-$(CONFIG_OF_LIBFDT) += fdt.o
 # Stub implementations of cache management functions for USB
 obj-y += cache.o
 
-ifdef CONFIG_FSL_DDR2
-obj-$(CONFIG_MPC8349) += ../mpc85xx/ddr-gen2.o
+ifdef CONFIG_SYS_FSL_DDR2
+obj-$(CONFIG_MPC8349) += $(SRCTREE)/drivers/ddr/fsl/mpc85xx_ddr_gen2.o
 else
 obj-y += spd_sdram.o
 endif
-obj-$(CONFIG_FSL_DDR2) += law.o
+obj-$(CONFIG_SYS_FSL_DDR2) += law.o
 
 endif # not minimal

arch/powerpc/cpu/mpc83xx/ecc.c

@@ -15,8 +15,8 @@
 void ecc_print_status(void)
 {
 	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-#ifdef CONFIG_FSL_DDR2
-	ccsr_ddr_t *ddr = &immap->ddr;
+#ifdef CONFIG_SYS_FSL_DDR2
+	struct ccsr_ddr __iomem *ddr = &immap->ddr;
 #else
 	ddr83xx_t *ddr = &immap->ddr;
 #endif
@@ -99,8 +99,8 @@ void ecc_print_status(void)
 int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-#ifdef CONFIG_FSL_DDR2
-	ccsr_ddr_t *ddr = &immap->ddr;
+#ifdef CONFIG_SYS_FSL_DDR2
+	struct ccsr_ddr __iomem *ddr = &immap->ddr;
 #else
 	ddr83xx_t *ddr = &immap->ddr;
 #endif

arch/powerpc/cpu/mpc85xx/Makefile

@@ -29,51 +29,6 @@ obj-$(CONFIG_MP)	+= release.o
 obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o
 obj-$(CONFIG_CPM2)	+= commproc.o
 
-# supports ddr1
-obj-$(CONFIG_MPC8540) += ddr-gen1.o
-obj-$(CONFIG_MPC8560) += ddr-gen1.o
-obj-$(CONFIG_MPC8541) += ddr-gen1.o
-obj-$(CONFIG_MPC8555) += ddr-gen1.o
-
-# supports ddr1/2
-obj-$(CONFIG_MPC8548) += ddr-gen2.o
-obj-$(CONFIG_MPC8568) += ddr-gen2.o
-obj-$(CONFIG_MPC8544) += ddr-gen2.o
-
-# supports ddr1/2/3
-obj-$(CONFIG_PPC_C29X)	+= ddr-gen3.o
-obj-$(CONFIG_MPC8572) += ddr-gen3.o
-obj-$(CONFIG_MPC8536) += ddr-gen3.o
-obj-$(CONFIG_MPC8569)	+= ddr-gen3.o
-obj-$(CONFIG_P1010)	+= ddr-gen3.o
-obj-$(CONFIG_P1011)	+= ddr-gen3.o
-obj-$(CONFIG_P1012)	+= ddr-gen3.o
-obj-$(CONFIG_P1013)	+= ddr-gen3.o
-obj-$(CONFIG_P1014)	+= ddr-gen3.o
-obj-$(CONFIG_P1020)	+= ddr-gen3.o
-obj-$(CONFIG_P1021)	+= ddr-gen3.o
-obj-$(CONFIG_P1022)	+= ddr-gen3.o
-obj-$(CONFIG_P1023)	+= ddr-gen3.o
-obj-$(CONFIG_P1024)	+= ddr-gen3.o
-obj-$(CONFIG_P1025)	+= ddr-gen3.o
-obj-$(CONFIG_P2010)	+= ddr-gen3.o
-obj-$(CONFIG_P2020)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P2041)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P5040)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_T4240)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_T4160)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_B4420)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
-obj-$(CONFIG_BSC9131)		+= ddr-gen3.o
-obj-$(CONFIG_BSC9132)		+= ddr-gen3.o
-obj-$(CONFIG_PPC_T1040)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_T1042)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_T1020)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_T1022)	+= ddr-gen3.o
-
 obj-$(CONFIG_CPM2)	+= ether_fcc.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 obj-$(CONFIG_FSL_CORENET) += liodn.o
@@ -95,6 +50,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_ids.o
 obj-$(CONFIG_PPC_T1042)	+= t1040_ids.o
 obj-$(CONFIG_PPC_T1020)	+= t1040_ids.o
 obj-$(CONFIG_PPC_T1022)	+= t1040_ids.o
+obj-$(CONFIG_PPC_T2080) += t2080_ids.o
+obj-$(CONFIG_PPC_T2081) += t2080_ids.o
 
 
 obj-$(CONFIG_QE)	+= qe_io.o
@@ -138,6 +95,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
 obj-$(CONFIG_PPC_T1042)	+= t1040_serdes.o
 obj-$(CONFIG_PPC_T1020)	+= t1040_serdes.o
 obj-$(CONFIG_PPC_T1022)	+= t1040_serdes.o
+obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
+obj-$(CONFIG_PPC_T2081) += t2080_serdes.o
 
 obj-y	+= cpu.o
 obj-y	+= cpu_init.o

arch/powerpc/cpu/mpc85xx/cpu.c

@@ -17,12 +17,12 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_lbc.h>
 #include <post.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -416,7 +416,7 @@ static void dump_spd_ddr_reg(void)
 	int i, j, k, m;
 	u8 *p_8;
 	u32 *p_32;
-	ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS];
+	struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
 	generic_spd_eeprom_t
 		spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
 
@@ -453,21 +453,21 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		switch (i) {
 		case 0:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
 			break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 		case 1:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 		case 2:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 		case 3:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
 			break;
 #endif
 		default:
@@ -482,7 +482,7 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
 		printf("     Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
 	puts("\n");
-	for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) {
+	for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
 		m = 0;
 		printf("%6d (0x%04x)", k * 4, k * 4);
 		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {

arch/powerpc/cpu/mpc85xx/mp.c

@@ -11,7 +11,7 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include "mp.h"
 
 DECLARE_GLOBAL_DATA_PTR;

arch/powerpc/cpu/mpc85xx/speed.c

@@ -122,7 +122,7 @@ void get_sys_info(sys_info_t *sys_info)
 		sys_info->freq_processor[cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
-#ifdef CONFIG_PPC_B4860
+#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
 #else

arch/powerpc/cpu/mpc85xx/spl_minimal.c

@@ -7,7 +7,7 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/global_data.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;

arch/powerpc/cpu/mpc85xx/t2080_ids.c

@@ -0,0 +1,142 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	/* dqrr liodn, frame data liodn, liodn off, sdest */
+	SET_QP_INFO(1, 27, 1, 0),
+	SET_QP_INFO(2, 28, 1, 0),
+	SET_QP_INFO(3, 29, 1, 1),
+	SET_QP_INFO(4, 30, 1, 1),
+	SET_QP_INFO(5, 31, 1, 2),
+	SET_QP_INFO(6, 32, 1, 2),
+	SET_QP_INFO(7, 33, 1, 3),
+	SET_QP_INFO(8, 34, 1, 3),
+	SET_QP_INFO(9, 35, 1, 0),
+	SET_QP_INFO(10, 36, 1, 0),
+	SET_QP_INFO(11, 37, 1, 1),
+	SET_QP_INFO(12, 38, 1, 1),
+	SET_QP_INFO(13, 39, 1, 2),
+	SET_QP_INFO(14, 40, 1, 2),
+	SET_QP_INFO(15, 41, 1, 3),
+	SET_QP_INFO(16, 42, 1, 3),
+	SET_QP_INFO(17, 43, 1, 0),
+	SET_QP_INFO(18, 44, 1, 0),
+};
+#endif
+
+#ifdef CONFIG_SYS_SRIO
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_BASE(1, 307),
+	SET_SRIO_LIODN_BASE(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_LIODN(62),
+	SET_BMAN_LIODN(63),
+#endif
+
+	SET_SDHC_LIODN(1, 552),
+
+	SET_PME_LIODN(117),
+
+	SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+	SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+	SET_SATA_LIODN(1, 555),
+	SET_SATA_LIODN(2, 556),
+
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+	SET_DMA_LIODN(1, 147),
+	SET_DMA_LIODN(2, 227),
+	SET_DMA_LIODN(3, 226),
+
+	SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+	SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+	SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+	SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+	SET_PMAN_LIODN(1, 513),
+	SET_PMAN_LIODN(2, 514),
+	SET_PMAN_LIODN(3, 515),
+#endif
+
+	/* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(1, 0, 88),
+	SET_FMAN_RX_1G_LIODN(1, 1, 89),
+	SET_FMAN_RX_1G_LIODN(1, 2, 90),
+	SET_FMAN_RX_1G_LIODN(1, 3, 91),
+	SET_FMAN_RX_1G_LIODN(1, 4, 92),
+	SET_FMAN_RX_1G_LIODN(1, 5, 93),
+	SET_FMAN_RX_10G_LIODN(1, 0, 94),
+	SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+	SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+	SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+	SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+	SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+	SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+	SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+	SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+	SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+	SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+	SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+	SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 6),
+	SET_RMAN_LIODN(1, 7),
+	SET_RMAN_LIODN(2, 8),
+	SET_RMAN_LIODN(3, 9),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+	[FSL_HW_PORTAL_DCE]  = SET_LIODN_BASE_2(618, 694),
+#endif
+	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+	[FSL_HW_PORTAL_PME]   = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};

arch/powerpc/cpu/mpc85xx/t2080_serdes.c

@@ -0,0 +1,208 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+	u32 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static const struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x6E, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xBC, {PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xC8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xD6, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xDE, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+	{0xE0, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4,
+		PCIE1, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xF2, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+	{0xF8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+	{0xFA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE1,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+#if defined(CONFIG_PPC_T2080)
+	{0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x95, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xA2, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x94, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x51, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x5F, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x65, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x6B, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM1_MAC1, XFI_FM1_MAC2,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x6D, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x71, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xA6, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x8E, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x8F, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x82, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x83, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xA4, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x96, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x8A, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x67, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM1_MAC1, XFI_FM1_MAC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xAB, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xDA, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE3, PCIE3, PCIE3, PCIE3} },
+	{0xD9, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xD3, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xCB, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xD8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x66, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM1_MAC1, XFI_FM1_MAC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+
+#elif defined(CONFIG_PPC_T2081)
+	{0xAA, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x70, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+#endif
+	{}
+};
+
+#ifndef CONFIG_PPC_T2081
+static const struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
+	{0x16, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} },
+	{0x01, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+	{0x29, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
+	{0x2D, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
+	{0x15, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} },
+	{0x18, {PCIE1, PCIE1, PCIE1, PCIE1, AURORA, AURORA, SATA1, SATA2} },
+	{0x02, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+	{0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} },
+	{}
+};
+#endif
+
+static const struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+#ifndef CONFIG_PPC_T2081
+	serdes2_cfg_tbl,
+#endif
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	const struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	const struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}

arch/powerpc/cpu/mpc86xx/Makefile

@@ -16,9 +16,6 @@ obj-$(CONFIG_MP) += release.o
 
 obj-y	+= cpu.o
 obj-y	+= cpu_init.o
-# 8610 & 8641 are identical w/regards to DDR
-obj-$(CONFIG_MPC8610) += ddr-8641.o
-obj-$(CONFIG_MPC8641) += ddr-8641.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 obj-y	+= interrupts.o
 obj-$(CONFIG_MP) += mp.o

arch/powerpc/cpu/mpc8xxx/Makefile

@@ -25,15 +25,8 @@ obj-y	+= cpu.o
 endif
 
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
-obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
 obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
 obj-$(CONFIG_SYS_SRIO) += srio.o
 obj-$(CONFIG_FSL_LAW) += law.o
 
 endif
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/
-else
-obj-y += ddr/
-endif

arch/powerpc/cpu/mpc8xxx/cpu.c

@@ -75,6 +75,8 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(T1020, T1020, 0),
 	CPU_TYPE_ENTRY(T1021, T1021, 0),
 	CPU_TYPE_ENTRY(T1022, T1022, 0),
+	CPU_TYPE_ENTRY(T2080, T2080, 0),
+	CPU_TYPE_ENTRY(T2081, T2081, 0),
 	CPU_TYPE_ENTRY(BSC9130, 9130, 1),
 	CPU_TYPE_ENTRY(BSC9131, 9131, 1),
 	CPU_TYPE_ENTRY(BSC9132, 9132, 2),

arch/powerpc/cpu/mpc8xxx/ddr/Makefile

@@ -1,29 +0,0 @@
-#
-# Copyright 2008-2011 Freescale Semiconductor, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# Version 2 as published by the Free Software Foundation.
-#
-
-obj-$(CONFIG_FSL_DDR1)	+= main.o util.o ctrl_regs.o options.o \
-				   lc_common_dimm_params.o
-
-obj-$(CONFIG_FSL_DDR2)	+= main.o util.o ctrl_regs.o options.o \
-				   lc_common_dimm_params.o
-
-obj-$(CONFIG_FSL_DDR3)	+= main.o util.o ctrl_regs.o options.o \
-				   lc_common_dimm_params.o
-ifdef CONFIG_DDR_SPD
-SPD := y
-endif
-ifdef CONFIG_SPD_EEPROM
-SPD := y
-endif
-ifdef SPD
-obj-$(CONFIG_FSL_DDR1)	+= ddr1_dimm_params.o
-obj-$(CONFIG_FSL_DDR2)	+= ddr2_dimm_params.o
-obj-$(CONFIG_FSL_DDR3)	+= ddr3_dimm_params.o
-endif
-
-obj-$(CONFIG_FSL_DDR_INTERACTIVE) += interactive.o

arch/powerpc/include/asm/config.h

@@ -9,10 +9,16 @@
 
 #ifdef CONFIG_MPC85xx
 #include <asm/config_mpc85xx.h>
+#define CONFIG_SYS_FSL_DDR
 #endif
 
 #ifdef CONFIG_MPC86xx
 #include <asm/config_mpc86xx.h>
+#define CONFIG_SYS_FSL_DDR
+#endif
+
+#ifdef CONFIG_MPC83xx
+#define CONFIG_SYS_FSL_DDR
 #endif
 
 #ifndef HWCONFIG_BUFFER_SIZE

arch/powerpc/include/asm/config_mpc85xx.h

@@ -40,17 +40,20 @@
 #elif defined(CONFIG_MPC8540)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		8
+#define CONFIG_SYS_FSL_DDRC_GEN1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 
 #elif defined(CONFIG_MPC8541)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		8
+#define CONFIG_SYS_FSL_DDRC_GEN1
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 
 #elif defined(CONFIG_MPC8544)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		10
+#define CONFIG_SYS_FSL_DDRC_GEN2
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	0
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -59,6 +62,7 @@
 #elif defined(CONFIG_MPC8548)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		10
+#define CONFIG_SYS_FSL_DDRC_GEN2
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	0
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -77,17 +81,20 @@
 #elif defined(CONFIG_MPC8555)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		8
+#define CONFIG_SYS_FSL_DDRC_GEN1
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 
 #elif defined(CONFIG_MPC8560)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		8
+#define CONFIG_SYS_FSL_DDRC_GEN1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 
 #elif defined(CONFIG_MPC8568)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		10
+#define CONFIG_SYS_FSL_DDRC_GEN2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define QE_MURAM_SIZE			0x10000UL
 #define MAX_QE_RISC			2
@@ -711,6 +718,50 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 
+#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
+#define CONFIG_E6500
+#define CONFIG_SYS_PPC64		/* 64-bit core */
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	2
+#define CONFIG_SYS_FSL_QMAN_V3
+#define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_LAWS		32
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS	{ 1, 4, 4, 4 }
+#define CONFIG_SYS_FSL_SRDS_1
+#define CONFIG_SYS_FSL_PCI_VER_3_X
+#if defined(CONFIG_PPC_T2080)
+#define CONFIG_SYS_NUM_FM1_DTSEC	8
+#define CONFIG_SYS_NUM_FM1_10GEC	4
+#define CONFIG_SYS_FSL_SRDS_2
+#define CONFIG_SYS_FSL_SRIO_LIODN
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#elif defined(CONFIG_PPC_T2081)
+#define CONFIG_SYS_NUM_FM1_DTSEC	6
+#define CONFIG_SYS_NUM_FM1_10GEC	2
+#endif
+#define CONFIG_SYS_FSL_NUM_USB_CTRLS	2
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_PME_PLAT_CLK_DIV		1
+#define CONFIG_SYS_PME_CLK		CONFIG_PME_PLAT_CLK_DIV
+#define CONFIG_SYS_FM1_CLK		0
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV	16
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v3.0"
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+#define CONFIG_SYS_FSL_SFP_VER_3_0
+#define CONFIG_SYS_FSL_ISBC_VER		2
+
 #elif defined(CONFIG_PPC_C29X)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_FSL_SDHC_V2_3
@@ -738,4 +789,10 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_THREADS_PER_CORE 1
 #endif
 
+#if !defined(CONFIG_SYS_FSL_DDRC_GEN1) && \
+	!defined(CONFIG_SYS_FSL_DDRC_GEN2) && \
+	!defined(CONFIG_SYS_FSL_DDRC_GEN3)
+#define CONFIG_SYS_FSL_DDRC_GEN3
+#endif
+
 #endif /* _ASM_MPC85xx_CONFIG_H_ */

arch/powerpc/include/asm/config_mpc86xx.h

@@ -7,6 +7,8 @@
 #ifndef _ASM_MPC86xx_CONFIG_H_
 #define _ASM_MPC86xx_CONFIG_H_
 
+#define CONFIG_SYS_FSL_DDR_86XX
+
 /* SoC specific defines for Freescale MPC86xx processors */
 
 #if defined(CONFIG_MPC8610)

arch/powerpc/include/asm/fsl_serdes.h

@@ -62,6 +62,8 @@ enum srds_prtcl {
 	QSGMII_FM1_B,		/* B indicates MACs 5,6,9,10 */
 	QSGMII_FM2_A,
 	QSGMII_FM2_B,
+	XFI_FM1_MAC1,
+	XFI_FM1_MAC2,
 	XFI_FM1_MAC9,
 	XFI_FM1_MAC10,
 	XFI_FM2_MAC9,

arch/powerpc/include/asm/immap_83xx.h

@@ -14,6 +14,7 @@
 #ifndef __IMMAP_83xx__
 #define __IMMAP_83xx__
 
+#include <fsl_immap.h>
 #include <asm/types.h>
 #include <asm/fsl_i2c.h>
 #include <asm/mpc8xxx_spi.h>
@@ -277,107 +278,10 @@ typedef struct qesba83xx {
 } qesba83xx_t;
 
 /*
- * DDR Memory Controller Memory Map
+ * DDR Memory Controller Memory Map for DDR1
+ * The structure of DDR2, or DDR3 is defined in fsl_immap.h
  */
-#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
-typedef struct ccsr_ddr {
-	u32	cs0_bnds;		/* Chip Select 0 Memory Bounds */
-	u8	res1[4];
-	u32	cs1_bnds;		/* Chip Select 1 Memory Bounds */
-	u8	res2[4];
-	u32	cs2_bnds;		/* Chip Select 2 Memory Bounds */
-	u8	res3[4];
-	u32	cs3_bnds;		/* Chip Select 3 Memory Bounds */
-	u8	res4[100];
-	u32	cs0_config;		/* Chip Select Configuration */
-	u32	cs1_config;		/* Chip Select Configuration */
-	u32	cs2_config;		/* Chip Select Configuration */
-	u32	cs3_config;		/* Chip Select Configuration */
-	u8	res4a[48];
-	u32	cs0_config_2;		/* Chip Select Configuration 2 */
-	u32	cs1_config_2;		/* Chip Select Configuration 2 */
-	u32	cs2_config_2;		/* Chip Select Configuration 2 */
-	u32	cs3_config_2;		/* Chip Select Configuration 2 */
-	u8	res5[48];
-	u32	timing_cfg_3;		/* SDRAM Timing Configuration 3 */
-	u32	timing_cfg_0;		/* SDRAM Timing Configuration 0 */
-	u32	timing_cfg_1;		/* SDRAM Timing Configuration 1 */
-	u32	timing_cfg_2;		/* SDRAM Timing Configuration 2 */
-	u32	sdram_cfg;		/* SDRAM Control Configuration */
-	u32	sdram_cfg_2;		/* SDRAM Control Configuration 2 */
-	u32	sdram_mode;		/* SDRAM Mode Configuration */
-	u32	sdram_mode_2;		/* SDRAM Mode Configuration 2 */
-	u32	sdram_md_cntl;		/* SDRAM Mode Control */
-	u32	sdram_interval;		/* SDRAM Interval Configuration */
-	u32	sdram_data_init;	/* SDRAM Data initialization */
-	u8	res6[4];
-	u32	sdram_clk_cntl;		/* SDRAM Clock Control */
-	u8	res7[20];
-	u32	init_addr;		/* training init addr */
-	u32	init_ext_addr;		/* training init extended addr */
-	u8	res8_1[16];
-	u32	timing_cfg_4;		/* SDRAM Timing Configuration 4 */
-	u32	timing_cfg_5;		/* SDRAM Timing Configuration 5 */
-	u8	reg8_1a[8];
-	u32	ddr_zq_cntl;		/* ZQ calibration control*/
-	u32	ddr_wrlvl_cntl;		/* write leveling control*/
-	u8	reg8_1aa[4];
-	u32	ddr_sr_cntr;		/* self refresh counter */
-	u32	ddr_sdram_rcw_1;	/* Control Words 1 */
-	u32	ddr_sdram_rcw_2;	/* Control Words 2 */
-	u8	reg_1ab[8];
-	u32	ddr_wrlvl_cntl_2;	/* write leveling control 2 */
-	u32	ddr_wrlvl_cntl_3;	/* write leveling control 3 */
-	u8	res8_1b[104];
-	u32	sdram_mode_3;		/* SDRAM Mode Configuration 3 */
-	u32	sdram_mode_4;		/* SDRAM Mode Configuration 4 */
-	u32	sdram_mode_5;		/* SDRAM Mode Configuration 5 */
-	u32	sdram_mode_6;		/* SDRAM Mode Configuration 6 */
-	u32	sdram_mode_7;		/* SDRAM Mode Configuration 7 */
-	u32	sdram_mode_8;		/* SDRAM Mode Configuration 8 */
-	u8	res8_1ba[0x908];
-	u32	ddr_dsr1;		/* Debug Status 1 */
-	u32	ddr_dsr2;		/* Debug Status 2 */
-	u32	ddr_cdr1;		/* Control Driver 1 */
-	u32	ddr_cdr2;		/* Control Driver 2 */
-	u8	res8_1c[200];
-	u32	ip_rev1;		/* IP Block Revision 1 */
-	u32	ip_rev2;		/* IP Block Revision 2 */
-	u32	eor;			/* Enhanced Optimization Register */
-	u8	res8_2[252];
-	u32	mtcr;			/* Memory Test Control Register */
-	u8	res8_3[28];
-	u32	mtp1;			/* Memory Test Pattern 1 */
-	u32	mtp2;			/* Memory Test Pattern 2 */
-	u32	mtp3;			/* Memory Test Pattern 3 */
-	u32	mtp4;			/* Memory Test Pattern 4 */
-	u32	mtp5;			/* Memory Test Pattern 5 */
-	u32	mtp6;			/* Memory Test Pattern 6 */
-	u32	mtp7;			/* Memory Test Pattern 7 */
-	u32	mtp8;			/* Memory Test Pattern 8 */
-	u32	mtp9;			/* Memory Test Pattern 9 */
-	u32	mtp10;			/* Memory Test Pattern 10 */
-	u8	res8_4[184];
-	u32	data_err_inject_hi;	/* Data Path Err Injection Mask High */
-	u32	data_err_inject_lo;	/* Data Path Err Injection Mask Low */
-	u32	ecc_err_inject;		/* Data Path Err Injection Mask ECC */
-	u8	res9[20];
-	u32	capture_data_hi;	/* Data Path Read Capture High */
-	u32	capture_data_lo;	/* Data Path Read Capture Low */
-	u32	capture_ecc;		/* Data Path Read Capture ECC */
-	u8	res10[20];
-	u32	err_detect;		/* Error Detect */
-	u32	err_disable;		/* Error Disable */
-	u32	err_int_en;
-	u32	capture_attributes;	/* Error Attrs Capture */
-	u32	capture_address;	/* Error Addr Capture */
-	u32	capture_ext_address;	/* Error Extended Addr Capture */
-	u32	err_sbe;		/* Single-Bit ECC Error Management */
-	u8	res11[164];
-	u32	debug[32];		/* debug_1 to debug_32 */
-	u8	res12[128];
-} ccsr_ddr_t;
-#else
+#if !defined(CONFIG_SYS_FSL_DDR2) && !defined(CONFIG_SYS_FSL_DDR3)
 typedef struct ddr_cs_bnds {
 	u32 csbnds;
 	u8 res0[4];
@@ -739,8 +643,8 @@ typedef struct immap {
 	u8			dll_ddr[0x100];
 	u8			dll_lbc[0x100];
 	u8			res1[0xE00];
-#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
-	ccsr_ddr_t		ddr;	/* DDR Memory Controller Memory */
+#if defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3)
+	struct ccsr_ddr		ddr;	/* DDR Memory Controller Memory */
 #else
 	ddr83xx_t		ddr;	/* DDR Memory Controller Memory */
 #endif
@@ -1029,7 +933,7 @@ typedef struct immap {
 #endif
 
 #define CONFIG_SYS_MPC8xxx_DDR_OFFSET	(0x2000)
-#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+#define CONFIG_SYS_FSL_DDR_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
 #define CONFIG_SYS_MPC83xx_DMA_OFFSET	(0x8000)
 #define CONFIG_SYS_MPC83xx_DMA_ADDR \

arch/powerpc/include/asm/immap_85xx.h

@@ -15,9 +15,10 @@
 #include <asm/types.h>
 #include <asm/fsl_dma.h>
 #include <asm/fsl_i2c.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <asm/fsl_lbc.h>
 #include <asm/fsl_fman.h>
+#include <fsl_immap.h>
 
 typedef struct ccsr_local {
 	u32	ccsrbarh;	/* CCSR Base Addr High */
@@ -112,105 +113,6 @@ typedef struct ccsr_local_ecm {
 	u8	res24[492];
 } ccsr_local_ecm_t;
 
-/* DDR memory controller registers */
-typedef struct ccsr_ddr {
-	u32	cs0_bnds;		/* Chip Select 0 Memory Bounds */
-	u8	res1[4];
-	u32	cs1_bnds;		/* Chip Select 1 Memory Bounds */
-	u8	res2[4];
-	u32	cs2_bnds;		/* Chip Select 2 Memory Bounds */
-	u8	res3[4];
-	u32	cs3_bnds;		/* Chip Select 3 Memory Bounds */
-	u8	res4[100];
-	u32	cs0_config;		/* Chip Select Configuration */
-	u32	cs1_config;		/* Chip Select Configuration */
-	u32	cs2_config;		/* Chip Select Configuration */
-	u32	cs3_config;		/* Chip Select Configuration */
-	u8	res4a[48];
-	u32	cs0_config_2;		/* Chip Select Configuration 2 */
-	u32	cs1_config_2;		/* Chip Select Configuration 2 */
-	u32	cs2_config_2;		/* Chip Select Configuration 2 */
-	u32	cs3_config_2;		/* Chip Select Configuration 2 */
-	u8	res5[48];
-	u32	timing_cfg_3;		/* SDRAM Timing Configuration 3 */
-	u32	timing_cfg_0;		/* SDRAM Timing Configuration 0 */
-	u32	timing_cfg_1;		/* SDRAM Timing Configuration 1 */
-	u32	timing_cfg_2;		/* SDRAM Timing Configuration 2 */
-	u32	sdram_cfg;		/* SDRAM Control Configuration */
-	u32	sdram_cfg_2;		/* SDRAM Control Configuration 2 */
-	u32	sdram_mode;		/* SDRAM Mode Configuration */
-	u32	sdram_mode_2;		/* SDRAM Mode Configuration 2 */
-	u32	sdram_md_cntl;		/* SDRAM Mode Control */
-	u32	sdram_interval;		/* SDRAM Interval Configuration */
-	u32	sdram_data_init;	/* SDRAM Data initialization */
-	u8	res6[4];
-	u32	sdram_clk_cntl;		/* SDRAM Clock Control */
-	u8	res7[20];
-	u32	init_addr;		/* training init addr */
-	u32	init_ext_addr;		/* training init extended addr */
-	u8	res8_1[16];
-	u32	timing_cfg_4;		/* SDRAM Timing Configuration 4 */
-	u32	timing_cfg_5;		/* SDRAM Timing Configuration 5 */
-	u8	reg8_1a[8];
-	u32	ddr_zq_cntl;		/* ZQ calibration control*/
-	u32	ddr_wrlvl_cntl;		/* write leveling control*/
-	u8	reg8_1aa[4];
-	u32	ddr_sr_cntr;		/* self refresh counter */
-	u32	ddr_sdram_rcw_1;	/* Control Words 1 */
-	u32	ddr_sdram_rcw_2;	/* Control Words 2 */
-	u8	reg_1ab[8];
-	u32	ddr_wrlvl_cntl_2;	/* write leveling control 2 */
-	u32	ddr_wrlvl_cntl_3;	/* write leveling control 3 */
-	u8	res8_1b[104];
-	u32	sdram_mode_3;		/* SDRAM Mode Configuration 3 */
-	u32	sdram_mode_4;		/* SDRAM Mode Configuration 4 */
-	u32	sdram_mode_5;		/* SDRAM Mode Configuration 5 */
-	u32	sdram_mode_6;		/* SDRAM Mode Configuration 6 */
-	u32	sdram_mode_7;		/* SDRAM Mode Configuration 7 */
-	u32	sdram_mode_8;		/* SDRAM Mode Configuration 8 */
-	u8	res8_1ba[0x908];
-	u32	ddr_dsr1;		/* Debug Status 1 */
-	u32	ddr_dsr2;		/* Debug Status 2 */
-	u32	ddr_cdr1;		/* Control Driver 1 */
-	u32	ddr_cdr2;		/* Control Driver 2 */
-	u8	res8_1c[200];
-	u32	ip_rev1;		/* IP Block Revision 1 */
-	u32	ip_rev2;		/* IP Block Revision 2 */
-	u32	eor;			/* Enhanced Optimization Register */
-	u8	res8_2[252];
-	u32	mtcr;			/* Memory Test Control Register */
-	u8	res8_3[28];
-	u32	mtp1;			/* Memory Test Pattern 1 */
-	u32	mtp2;			/* Memory Test Pattern 2 */
-	u32	mtp3;			/* Memory Test Pattern 3 */
-	u32	mtp4;			/* Memory Test Pattern 4 */
-	u32	mtp5;			/* Memory Test Pattern 5 */
-	u32	mtp6;			/* Memory Test Pattern 6 */
-	u32	mtp7;			/* Memory Test Pattern 7 */
-	u32	mtp8;			/* Memory Test Pattern 8 */
-	u32	mtp9;			/* Memory Test Pattern 9 */
-	u32	mtp10;			/* Memory Test Pattern 10 */
-	u8	res8_4[184];
-	u32	data_err_inject_hi;	/* Data Path Err Injection Mask High */
-	u32	data_err_inject_lo;	/* Data Path Err Injection Mask Low */
-	u32	ecc_err_inject;		/* Data Path Err Injection Mask ECC */
-	u8	res9[20];
-	u32	capture_data_hi;	/* Data Path Read Capture High */
-	u32	capture_data_lo;	/* Data Path Read Capture Low */
-	u32	capture_ecc;		/* Data Path Read Capture ECC */
-	u8	res10[20];
-	u32	err_detect;		/* Error Detect */
-	u32	err_disable;		/* Error Disable */
-	u32	err_int_en;
-	u32	capture_attributes;	/* Error Attrs Capture */
-	u32	capture_address;	/* Error Addr Capture */
-	u32	capture_ext_address;	/* Error Extended Addr Capture */
-	u32	err_sbe;		/* Single-Bit ECC Error Management */
-	u8	res11[164];
-	u32	debug[32];		/* debug_1 to debug_32 */
-	u8	res12[128];
-} ccsr_ddr_t;
-
 #define DDR_EOR_RD_BDW_OPT_DIS	0x80000000 /* Read BDW Opt. disable */
 #define DDR_EOR_ADDR_HASH_EN	0x40000000 /* Address hash enabled */
 
@@ -1719,6 +1621,8 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_DEVDISR2_DTSEC1_10	0x00400000
 #define FSL_CORENET_DEVDISR2_10GEC1_1	0x00800000
 #define FSL_CORENET_DEVDISR2_10GEC1_2	0x00400000
+#define FSL_CORENET_DEVDISR2_10GEC1_3	0x80000000
+#define FSL_CORENET_DEVDISR2_10GEC1_4	0x40000000
 #define FSL_CORENET_DEVDISR2_DTSEC2_1	0x00080000
 #define FSL_CORENET_DEVDISR2_DTSEC2_2	0x00040000
 #define FSL_CORENET_DEVDISR2_DTSEC2_3	0x00020000
@@ -1855,6 +1759,12 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	24
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL	0x00fe0000
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	17
+#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xff000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	24
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL		0x00ff0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	16
+#define FSL_CORENET_RCWSR6_BOOT_LOC		0x0f800000
 #endif
 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1	0x00800000
 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2	0x00400000
@@ -1917,6 +1827,15 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII	0x00000000
 #define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII	0x08000000
 #define FSL_CORENET_RCWSR13_EC2_FM1_GPIO		0x10000000
+#endif
+#if defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
+#define FSL_CORENET_RCWSR13_EC1			0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC1_GPIO		0x40000000
+#define FSL_CORENET_RCWSR13_EC2			0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC2_DTSEC10_RGMII	0x08000000
+#define FSL_CORENET_RCWSR13_EC2_GPIO		0x10000000
 #endif
 	u8	res18[192];
 	u32	scratchrw[4];	/* Scratch Read/Write */
@@ -2914,6 +2833,7 @@ struct ccsr_pman {
 #define CONFIG_SYS_FSL_CPC_OFFSET		0x10000
 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET		0x100000
 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET		0x101000
+#define CONFIG_SYS_MPC85xx_DMA3_OFFSET		0x102000
 #define CONFIG_SYS_MPC85xx_DMA_OFFSET		CONFIG_SYS_MPC85xx_DMA1_OFFSET
 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET		0x110000
 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET		0x114000
@@ -3048,11 +2968,11 @@ struct ccsr_pman {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
 #define CONFIG_SYS_MPC85xx_ECM_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
-#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+#define CONFIG_SYS_FSL_DDR_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
-#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \
+#define CONFIG_SYS_FSL_DDR2_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \
+#define CONFIG_SYS_FSL_DDR3_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET)
 #define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)

arch/powerpc/include/asm/immap_86xx.h

@@ -10,6 +10,7 @@
 #ifndef __IMMAP_86xx__
 #define __IMMAP_86xx__
 
+#include <fsl_immap.h>
 #include <asm/types.h>
 #include <asm/fsl_dma.h>
 #include <asm/fsl_lbc.h>
@@ -89,75 +90,6 @@ typedef struct ccsr_local_mcm {
 	char	res31[488];
 } ccsr_local_mcm_t;
 
-/* DDR memory controller registers(0x2000-0x3000) and (0x6000-0x7000) */
-
-typedef struct ccsr_ddr {
-	uint	cs0_bnds;		/* 0x2000 - DDR Chip Select 0 Memory Bounds */
-	char	res1[4];
-	uint	cs1_bnds;		/* 0x2008 - DDR Chip Select 1 Memory Bounds */
-	char	res2[4];
-	uint	cs2_bnds;		/* 0x2010 - DDR Chip Select 2 Memory Bounds */
-	char	res3[4];
-	uint	cs3_bnds;		/* 0x2018 - DDR Chip Select 3 Memory Bounds */
-	char	res4[4];
-	uint	cs4_bnds;		/* 0x2020 - DDR Chip Select 4 Memory Bounds */
-	char	res5[4];
-	uint	cs5_bnds;		/* 0x2028 - DDR Chip Select 5 Memory Bounds */
-	char	res6[84];
-	uint	cs0_config;		/* 0x2080 - DDR Chip Select Configuration */
-	uint	cs1_config;		/* 0x2084 - DDR Chip Select Configuration */
-	uint	cs2_config;		/* 0x2088 - DDR Chip Select Configuration */
-	uint	cs3_config;		/* 0x208c - DDR Chip Select Configuration */
-	uint	cs4_config;		/* 0x2090 - DDR Chip Select Configuration */
-	uint	cs5_config;		/* 0x2094 - DDR Chip Select Configuration */
-	char	res7[104];
-	uint	timing_cfg_3;		/* 0x2100 - DDR SDRAM Timing Configuration Register 3 */
-	uint	timing_cfg_0;		/* 0x2104 - DDR SDRAM Timing Configuration Register 0 */
-	uint	timing_cfg_1;		/* 0x2108 - DDR SDRAM Timing Configuration Register 1 */
-	uint	timing_cfg_2;		/* 0x210c - DDR SDRAM Timing Configuration Register 2 */
-	uint	sdram_cfg;		/* 0x2110 - DDR SDRAM Control Configuration 1 */
-	uint    sdram_cfg_2;            /* 0x2114 - DDR SDRAM Control Configuration 2 */
-	uint	sdram_mode;		/* 0x2118 - DDR SDRAM Mode Configuration 1 */
-	uint    sdram_mode_2;		/* 0x211c - DDR SDRAM Mode Configuration 2 */
-	uint    sdram_mode_cntl;        /* 0x2120 - DDR SDRAM Mode Control */
-	uint	sdram_interval;		/* 0x2124 - DDR SDRAM Interval Configuration */
-	uint    sdram_data_init;	/* 0x2128 - DDR SDRAM Data Initialization */
-	char	res8[4];
-	uint	sdram_clk_cntl;		/* 0x2130 - DDR SDRAM Clock Control */
-	char    res9[12];
-	uint    sdram_ocd_cntl;		/* 0x2140 - DDR SDRAM OCD Control */
-	uint    sdram_ocd_status;	/* 0x2144 - DDR SDRAM OCD Status */
-	uint    init_addr;		/* 0x2148 - DDR training initialzation address */
-	uint    init_ext_addr;		/* 0x214C - DDR training initialzation extended address */
-	char    res10[2728];
-	uint    ip_rev1;		/* 0x2BF8 - DDR IP Block Revision 1 */
-	uint    ip_rev2;		/* 0x2BFC - DDR IP Block Revision 2 */
-	char	res11[512];
-	uint	data_err_inject_hi;	/* 0x2e00 - DDR Memory Data Path Error Injection Mask High */
-	uint	data_err_inject_lo;	/* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */
-	uint	ecc_err_inject;		/* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */
-	char	res12[20];
-	uint	capture_data_hi;	/* 0x2e20 - DDR Memory Data Path Read Capture High */
-	uint	capture_data_lo;	/* 0x2e24 - DDR Memory Data Path Read Capture Low */
-	uint	capture_ecc;		/* 0x2e28 - DDR Memory Data Path Read Capture ECC */
-	char	res13[20];
-	uint	err_detect;		/* 0x2e40 - DDR Memory Error Detect */
-	uint	err_disable;		/* 0x2e44 - DDR Memory Error Disable */
-	uint	err_int_en;		/* 0x2e48 - DDR Memory Error Interrupt Enable */
-	uint	capture_attributes;	/* 0x2e4c - DDR Memory Error Attributes Capture */
-	uint	capture_address;	/* 0x2e50 - DDR Memory Error Address Capture */
-	uint	capture_ext_address;	/* 0x2e54 - DDR Memory Error Extended Address Capture */
-	uint	err_sbe;		/* 0x2e58 - DDR Memory Single-Bit ECC Error Management */
-	char	res14[164];
-	uint	debug_1;		/* 0x2f00 */
-	uint	debug_2;
-	uint	debug_3;
-	uint	debug_4;
-	uint	debug_5;
-	char	res15[236];
-} ccsr_ddr_t;
-
-
 /* Daul I2C Registers(0x3000-0x4000) */
 typedef struct ccsr_i2c {
 	struct fsl_i2c	i2c[2];
@@ -1225,11 +1157,11 @@ typedef struct ccsr_wdt {
 
 typedef struct immap {
 	ccsr_local_mcm_t	im_local_mcm;
-	ccsr_ddr_t		im_ddr1;
+	struct ccsr_ddr		im_ddr1;
 	ccsr_i2c_t		im_i2c;
 	ccsr_duart_t		im_duart;
 	fsl_lbc_t		im_lbc;
-	ccsr_ddr_t		im_ddr2;
+	struct ccsr_ddr		im_ddr2;
 	char                    res1[4096];
 	ccsr_pex_t		im_pex1;
 	ccsr_pex_t		im_pex2;
@@ -1253,9 +1185,9 @@ typedef struct immap {
 extern immap_t  *immr;
 
 #define CONFIG_SYS_MPC8xxx_DDR_OFFSET	0x2000
-#define CONFIG_SYS_MPC8xxx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_FSL_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
 #define CONFIG_SYS_MPC8xxx_DDR2_OFFSET	0x6000
-#define CONFIG_SYS_MPC8xxx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
+#define CONFIG_SYS_FSL_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
 #define CONFIG_SYS_MPC86xx_DMA_OFFSET	0x21000
 #define CONFIG_SYS_MPC86xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
 #define CONFIG_SYS_MPC86xx_PIC_OFFSET	0x40000

arch/powerpc/include/asm/mpc85xx_gpio.h

@@ -20,7 +20,7 @@
 static inline void mpc85xx_gpio_set(unsigned int mask,
 		unsigned int dir, unsigned int val)
 {
-	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00);
+	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
 
 	/* First mask off the unwanted parts of "dir" and "val" */
 	dir &= mask;
@@ -56,7 +56,7 @@ static inline void mpc85xx_gpio_set_high(unsigned int gpios)
 
 static inline unsigned int mpc85xx_gpio_get(unsigned int mask)
 {
-	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00);
+	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
 
 	/* Read the requested values */
 	return in_be32(&gpio->gpdat) & mask;

arch/powerpc/include/asm/processor.h

@@ -1127,6 +1127,8 @@
 #define SVR_T1020	0x852100
 #define SVR_T1021	0x852101
 #define SVR_T1022	0x852102
+#define SVR_T2080	0x853000
+#define SVR_T2081	0x853100
 
 #define SVR_8610	0x80A000
 #define SVR_8641	0x809000

board/exmeritus/hww1u1a/ddr.c

@@ -9,8 +9,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/exmeritus/hww1u1a/hww1u1a.c

@@ -13,7 +13,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <miiphy.h>
 #include <libfdt.h>
@@ -37,6 +37,7 @@ int checkboard(void)
 	unsigned int gpio_low  = 0;
 	unsigned int gpio_in   = 0;
 	unsigned int i;
+	struct ccsr_ddr __iomem *ddr;
 
 	puts("Board: HWW-1U-1A ");
 
@@ -89,7 +90,7 @@ int checkboard(void)
 	 * and delay a while before we continue.
 	 */
 	if (mpc85xx_gpio_get(GPIO_RESETS)) {
-		ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+		ddr = (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 
 		puts("Debugger detected... extra device reset enabled!\n");
 

board/freescale/b4860qds/ddr.c

@@ -9,11 +9,11 @@
 #include <common.h>
 #include <i2c.h>
 #include <hwconfig.h>
+#include <fsl_ddr.h>
 #include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
-#include <../arch/powerpc/cpu/mpc8xxx/ddr/ddr.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 

board/freescale/bsc9131rdb/ddr.c

@@ -8,8 +8,8 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 

board/freescale/bsc9131rdb/spl_minimal.c

@@ -10,7 +10,7 @@
 #include <nand.h>
 #include <linux/compiler.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/global_data.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -20,7 +20,8 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 static void sdram_init(void)
 {
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 
 	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
 	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);

board/freescale/bsc9132qds/bsc9132qds.c

@@ -17,10 +17,10 @@
 #include <tsec.h>
 #include <mmc.h>
 #include <netdev.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <hwconfig.h>
 #include <i2c.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 #ifdef CONFIG_PCI
 #include <pci.h>
@@ -133,16 +133,16 @@ void dsp_ddr_configure(void)
 	 *copy the ddr controller settings from PowerPC side DDR controller
 	 *to the DSP DDR controller as connected DDR memories are similar.
 	 */
-	ccsr_ddr_t __iomem *pa_ddr =
-			(ccsr_ddr_t __iomem *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-	ccsr_ddr_t temp_ddr;
-	ccsr_ddr_t __iomem *dsp_ddr =
-			(ccsr_ddr_t __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR;
+	struct ccsr_ddr __iomem *pa_ddr =
+			(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
+	struct ccsr_ddr temp_ddr;
+	struct ccsr_ddr __iomem *dsp_ddr =
+			(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR;
 
-	memcpy(&temp_ddr, pa_ddr, sizeof(ccsr_ddr_t));
+	memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr));
 	temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS;
 	temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN;
-	memcpy(dsp_ddr, &temp_ddr, sizeof(ccsr_ddr_t));
+	memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr));
 	dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN;
 }
 

board/freescale/bsc9132qds/ddr.c

@@ -8,8 +8,8 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 

board/freescale/bsc9132qds/spl_minimal.c

@@ -10,14 +10,15 @@
 #include <nand.h>
 #include <linux/compiler.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/global_data.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 static void sdram_init(void)
 {
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 #if CONFIG_DDR_CLK_FREQ == 100000000
 	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
 	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);

board/freescale/c29xpcie/c29xpcie.c

@@ -18,7 +18,7 @@
 #include <mmc.h>
 #include <netdev.h>
 #include <pci.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <asm/fsl_pci.h>
 
 #include "cpld.h"

board/freescale/c29xpcie/ddr.c

@@ -6,8 +6,8 @@
 
 #include <common.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 #include "cpld.h"
 

board/freescale/corenet_ds/ddr.c

@@ -10,8 +10,8 @@
 #include <i2c.h>
 #include <hwconfig.h>
 #include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
 
 DECLARE_GLOBAL_DATA_PTR;

board/freescale/corenet_ds/eth_p4080.c

@@ -12,7 +12,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>

board/freescale/corenet_ds/p3041ds_ddr.c

@@ -7,7 +7,7 @@
  */
 
 #include <common.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 fixed_ddr_parm_t fixed_ddr_parm_0[] = {
 	{0, 0, NULL}

board/freescale/corenet_ds/p4080ds_ddr.c

@@ -7,7 +7,7 @@
  */
 
 #include <common.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 #define CONFIG_SYS_DDR_TIMING_3_1200	0x01030000
 #define CONFIG_SYS_DDR_TIMING_0_1200	0xCC550104

board/freescale/corenet_ds/p5020ds_ddr.c

@@ -7,7 +7,7 @@
  */
 
 #include <common.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 fixed_ddr_parm_t fixed_ddr_parm_0[] = {
 	{0, 0, NULL}

board/freescale/corenet_ds/p5040ds_ddr.c

@@ -7,7 +7,7 @@
  */
 
 #include <common.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 fixed_ddr_parm_t fixed_ddr_parm_0[] = {
 	{0, 0, NULL}

board/freescale/mpc8349emds/Makefile

@@ -7,4 +7,4 @@
 
 obj-y += mpc8349emds.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_FSL_DDR2) += ddr.o
+obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o

board/freescale/mpc8349emds/ddr.c

@@ -6,8 +6,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 struct board_specific_parameters {
 	u32 n_ranks;

board/freescale/mpc8349emds/mpc8349emds.c

@@ -12,8 +12,8 @@
 #include <i2c.h>
 #include <spi.h>
 #include <miiphy.h>
-#ifdef CONFIG_FSL_DDR2
-#include <asm/fsl_ddr_sdram.h>
+#ifdef CONFIG_SYS_FSL_DDR2
+#include <fsl_ddr_sdram.h>
 #else
 #include <spd_sdram.h>
 #endif
@@ -57,7 +57,7 @@ phys_size_t initdram (int board_type)
 	/* DDR SDRAM - Main SODIMM */
 	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
-#ifndef CONFIG_FSL_DDR2
+#ifndef CONFIG_SYS_FSL_DDR2
 	msize = spd_sdram() * 1024 * 1024;
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	ddr_enable_ecc(msize);

board/freescale/mpc8536ds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8536ds/mpc8536ds.c

@@ -12,7 +12,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/fsl_serdes.h>
 #include <spd.h>
@@ -90,7 +90,7 @@ int checkboard (void)
 phys_size_t fixed_sdram (void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	struct ccsr_ddr __iomem *ddr = &immap->im_ddr;
 	uint d_init;
 
 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;

board/freescale/mpc8540ads/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8540ads/mpc8540ads.c

@@ -14,7 +14,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <libfdt.h>
 #include <fdt_support.h>
 
@@ -168,7 +168,8 @@ void lbc_sdram_init(void)
 phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);
 
 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;

board/freescale/mpc8541cds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8541cds/mpc8541cds.c

@@ -11,7 +11,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <ioports.h>
 #include <spd_sdram.h>
 #include <libfdt.h>

board/freescale/mpc8544ds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8544ds/mpc8544ds.c

@@ -11,7 +11,7 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <asm/io.h>
 #include <miiphy.h>

board/freescale/mpc8548cds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8548cds/mpc8548cds.c

@@ -12,7 +12,7 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <miiphy.h>
 #include <libfdt.h>

board/freescale/mpc8555cds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8555cds/mpc8555cds.c

@@ -9,7 +9,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <ioports.h>
 #include <spd_sdram.h>
 #include <libfdt.h>

board/freescale/mpc8560ads/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8560ads/mpc8560ads.c

@@ -14,7 +14,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <ioports.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
@@ -373,7 +373,7 @@ void lbc_sdram_init(void)
 phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_FSL_DDR_ADDR);
 
 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;

board/freescale/mpc8568mds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8568mds/mpc8568mds.c

@@ -12,7 +12,7 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <spd_sdram.h>
 #include <i2c.h>

board/freescale/mpc8569mds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8569mds/mpc8569mds.c

@@ -14,7 +14,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
@@ -231,7 +231,8 @@ int checkboard (void)
 #if !defined(CONFIG_SPD_EEPROM)
 phys_size_t fixed_sdram(void)
 {
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 	uint d_init;
 
 	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);

board/freescale/mpc8572ds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 struct board_specific_parameters {
 	u32 n_ranks;

board/freescale/mpc8572ds/mpc8572ds.c

@@ -12,7 +12,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/fsl_serdes.h>
 #include <miiphy.h>
@@ -62,7 +62,7 @@ int checkboard (void)
 phys_size_t fixed_sdram (void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+	struct ccsr_ddr __iomem *ddr = &immap->im_ddr;
 	uint d_init;
 
 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;

board/freescale/mpc8610hpcd/Makefile

@@ -4,6 +4,6 @@
 #
 
 obj-y	+= mpc8610hpcd.o
-obj-$(CONFIG_FSL_DDR2) += ddr.o
+obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
 obj-y	+= law.o
 obj-$(CONFIG_FSL_DIU_FB)	+= mpc8610hpcd_diu.o

board/freescale/mpc8610hpcd/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/mpc8610hpcd/mpc8610hpcd.c

@@ -10,7 +10,7 @@
 #include <asm/processor.h>
 #include <asm/immap_86xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <i2c.h>
 #include <asm/io.h>
@@ -143,7 +143,7 @@ phys_size_t fixed_sdram(void)
 {
 #if !defined(CONFIG_SYS_RAMBOOT)
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+	struct ccsr_ddr __iomem *ddr = &immap->im_ddr1;
 	uint d_init;
 
 	ddr->cs0_bnds = 0x0000001f;

board/freescale/mpc8641hpcn/Makefile

@@ -7,4 +7,4 @@
 
 obj-y	+= mpc8641hpcn.o
 obj-y	+= law.o
-obj-$(CONFIG_FSL_DDR2) += ddr.o
+obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o

board/freescale/mpc8641hpcn/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 struct board_specific_parameters {
 	u32 n_ranks;

board/freescale/mpc8641hpcn/mpc8641hpcn.c

@@ -9,7 +9,7 @@
 #include <asm/processor.h>
 #include <asm/immap_86xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <asm/io.h>
 #include <libfdt.h>
@@ -64,7 +64,7 @@ fixed_sdram(void)
 {
 #if !defined(CONFIG_SYS_RAMBOOT)
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+	struct ccsr_ddr __iomem *ddr = &immap->im_ddr1;
 
 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;

board/freescale/p1010rdb/ddr.c

@@ -8,8 +8,8 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 

board/freescale/p1010rdb/p1010rdb.c

@@ -19,7 +19,7 @@
 #include <netdev.h>
 #include <pci.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <asm/fsl_pci.h>
 #include <hwconfig.h>
 #include <i2c.h>

board/freescale/p1010rdb/spl_minimal.c

@@ -10,7 +10,7 @@
 #include <nand.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_law.h>
 #include <asm/global_data.h>
 
@@ -19,7 +19,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void sdram_init(void)
 {
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	u32 ddr_ratio;
 	unsigned long ddr_freq_mhz;

board/freescale/p1022ds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 struct board_specific_parameters {
 	u32 n_ranks;

board/freescale/p1022ds/p1022ds.c

@@ -14,7 +14,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <asm/io.h>
 #include <libfdt.h>

board/freescale/p1022ds/spl_minimal.c

@@ -9,7 +9,7 @@
 #include <asm/io.h>
 #include <nand.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 
 const static u32 sysclk_tbl[] = {

board/freescale/p1023rdb/ddr.c

@@ -8,8 +8,8 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 

board/freescale/p1023rdb/p1023rdb.c

@@ -16,7 +16,7 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_portals.h>
 #include <libfdt.h>
 #include <fdt_support.h>

board/freescale/p1023rds/p1023rds.c

@@ -16,7 +16,7 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_portals.h>
 #include <libfdt.h>
 #include <fdt_support.h>
@@ -58,7 +58,8 @@ int checkboard(void)
 phys_size_t fixed_sdram(void)
 {
 #ifndef CONFIG_SYS_RAMBOOT
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 
 	set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1);
 

board/freescale/p1_p2_rdb/ddr.c

@@ -8,7 +8,7 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 

board/freescale/p1_p2_rdb_pc/ddr.c

@@ -10,8 +10,8 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 

board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c

@@ -14,7 +14,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_lbc.h>

board/freescale/p1_p2_rdb_pc/spl_minimal.c

@@ -10,7 +10,7 @@
 #include <nand.h>
 #include <linux/compiler.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/global_data.h>
 
 DECLARE_GLOBAL_DATA_PTR;

board/freescale/p1_twr/ddr.c

@@ -8,8 +8,8 @@
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 

board/freescale/p1_twr/p1_twr.c

@@ -14,7 +14,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_lbc.h>

board/freescale/p2020come/ddr.c

@@ -5,8 +5,8 @@
  */
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,

board/freescale/p2020ds/ddr.c

@@ -8,8 +8,8 @@
 
 #include <common.h>
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 
 struct board_specific_parameters {
 	u32 n_ranks;
@@ -37,7 +37,7 @@ static const struct board_specific_parameters dimm0[] = {
 	 *   num|  hi|  clk| cpo|wrdata|2T
 	 * ranks| mhz|adjst|    | delay|
 	 */
-#ifdef CONFIG_FSL_DDR2
+#ifdef CONFIG_SYS_FSL_DDR2
 	{2,  549,    4,   0x1f,    2,  0},
 	{2,  680,    4,   0x1f,    3,  0},
 	{2,  850,    4,   0x1f,    4,  0},

board/freescale/p2020ds/p2020ds.c

@@ -12,7 +12,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/fsl_serdes.h>
 #include <miiphy.h>
@@ -68,7 +68,8 @@ int checkboard(void)
 
 phys_size_t fixed_sdram(void)
 {
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
 	uint d_init;
 
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;

board/freescale/p2041rdb/ddr.c

@@ -10,8 +10,8 @@
 #include <i2c.h>
 #include <hwconfig.h>
 #include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
 
 struct board_specific_parameters {

board/freescale/t1040qds/ddr.c

@@ -8,8 +8,8 @@
 #include <i2c.h>
 #include <hwconfig.h>
 #include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
 #include "ddr.h"
 

board/freescale/t104xrdb/ddr.c

@@ -8,8 +8,8 @@
 #include <i2c.h>
 #include <hwconfig.h>
 #include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
 #include "ddr.h"
 

board/freescale/t2080qds/Makefile

@@ -0,0 +1,12 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-$(CONFIG_T2080QDS) += t2080qds.o
+obj-$(CONFIG_T2080QDS) += eth_t2080qds.o
+obj-$(CONFIG_PCI)      += pci.o
+obj-y   += ddr.o
+obj-y   += law.o
+obj-y   += tlb.o

board/freescale/t2080qds/ddr.c

@@ -0,0 +1,127 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 2) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	/*
+	 * we use identical timing for all slots. If needed, change the code
+	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+	 */
+	if (popts->registered_dimm_en)
+		pbsp = rdimms[0];
+	else
+		pbsp = udimms[0];
+
+
+	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks &&
+		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->cpo_override = pbsp->cpo;
+				popts->write_data_delay =
+					pbsp->write_data_delay;
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				popts->twot_en = pbsp->force_2t;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found");
+		printf("for data rate %lu MT/s\n", ddr_freq);
+		printf("Trying to use the highest speed (%u) parameters\n",
+		       pbsp_highest->datarate_mhz_high);
+		popts->cpo_override = pbsp_highest->cpo;
+		popts->write_data_delay = pbsp_highest->write_data_delay;
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+		popts->twot_en = pbsp_highest->force_2t;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
+		"wrlvl_ctrl_3 0x%x\n",
+		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+		pbsp->wrlvl_ctl_3);
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+	puts("Initializing....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}

board/freescale/t2080qds/ddr.h

@@ -0,0 +1,85 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+	u32 cpo;
+	u32 write_data_delay;
+	u32 force_2t;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
+	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
+	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
+	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{1,  1800, 2, 5,     6, 0x06070709, 0x110a0b08,   0xff,    2,  0},
+	{1,  1866, 2, 4,     6, 0x06060708, 0x09090a07,   0xff,    2,  0},
+	{1,  1900, 2, 4,     6, 0x06060708, 0x09090a07,   0xff,    2,  0},
+	{1,  2000, 2, 4,     8, 0x090a0b0d, 0x0e0f110b,   0xff,    2,  0},
+	{1,  2133, 2, 4,     8, 0x090a0b0d, 0x0e0f110b,   0xff,    2,  0},
+	{}
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
+	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906,   0xff,    2,  0},
+	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
+	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
+	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
+	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
+	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
+	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
+	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
+	{}
+};
+
+/*
+ * The three slots have slightly different timing. The center values are good
+ * for all slots. We use identical speed tables for them. In future use, if
+ * DIMMs require separated tables, make more entries as needed.
+ */
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+/*
+ * The three slots have slightly different timing. See comments above.
+ */
+static const struct board_specific_parameters *rdimms[] = {
+	rdimm0,
+};
+
+
+#endif

board/freescale/t2080qds/eth_t2080qds.c

@@ -0,0 +1,511 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+#include "../common/qixis.h"
+#include "../common/fman.h"
+#include "t2080qds_qixis.h"
+
+#define EMI_NONE	0xFFFFFFFF
+#define EMI1_RGMII1	0
+#define EMI1_RGMII2     1
+#define EMI1_SLOT1	2
+#define EMI1_SLOT2	6
+#define EMI1_SLOT3	3
+#define EMI1_SLOT4	4
+#define EMI1_SLOT5	5
+#define EMI2		7
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char * const mdio_names[] = {
+	"T2080QDS_MDIO_RGMII1",
+	"T2080QDS_MDIO_RGMII2",
+	"T2080QDS_MDIO_SLOT1",
+	"T2080QDS_MDIO_SLOT3",
+	"T2080QDS_MDIO_SLOT4",
+	"T2080QDS_MDIO_SLOT5",
+	"T2080QDS_MDIO_SLOT2",
+	"T2080QDS_MDIO_10GC",
+};
+
+/* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
+static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
+
+static const char *T2080qds_mdio_name_for_muxval(u8 muxval)
+{
+	return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+	struct mii_dev *bus;
+	const char *name = T2080qds_mdio_name_for_muxval(muxval);
+
+	if (!name) {
+		printf("No bus for muxval %x\n", muxval);
+		return NULL;
+	}
+
+	bus = miiphy_get_dev_by_name(name);
+
+	if (!bus) {
+		printf("No bus by name %s\n", name);
+		return NULL;
+	}
+
+	return bus;
+}
+
+struct T2080qds_mdio {
+	u8 muxval;
+	struct mii_dev *realbus;
+};
+
+static void T2080qds_mux_mdio(u8 muxval)
+{
+	u8 brdcfg4;
+	if (muxval < 7) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+	}
+}
+
+static int T2080qds_mdio_read(struct mii_dev *bus, int addr, int devad,
+				int regnum)
+{
+	struct T2080qds_mdio *priv = bus->priv;
+
+	T2080qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int T2080qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+				int regnum, u16 value)
+{
+	struct T2080qds_mdio *priv = bus->priv;
+
+	T2080qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int T2080qds_mdio_reset(struct mii_dev *bus)
+{
+	struct T2080qds_mdio *priv = bus->priv;
+
+	return priv->realbus->reset(priv->realbus);
+}
+
+static int T2080qds_mdio_init(char *realbusname, u8 muxval)
+{
+	struct T2080qds_mdio *pmdio;
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate T2080QDS MDIO bus\n");
+		return -1;
+	}
+
+	pmdio = malloc(sizeof(*pmdio));
+	if (!pmdio) {
+		printf("Failed to allocate T2080QDS private data\n");
+		free(bus);
+		return -1;
+	}
+
+	bus->read = T2080qds_mdio_read;
+	bus->write = T2080qds_mdio_write;
+	bus->reset = T2080qds_mdio_reset;
+	sprintf(bus->name, T2080qds_mdio_name_for_muxval(muxval));
+
+	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+	if (!pmdio->realbus) {
+		printf("No bus with name %s\n", realbusname);
+		free(bus);
+		free(pmdio);
+		return -1;
+	}
+
+	pmdio->muxval = muxval;
+	bus->priv = pmdio;
+
+	return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+				enum fm_port port, int offset)
+{
+	int phy;
+	char alias[20];
+	struct fixed_link f_link;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+		phy = fm_info_get_phy_address(port);
+		switch (port) {
+		case FM1_DTSEC1:
+		case FM1_DTSEC2:
+		case FM1_DTSEC9:
+		case FM1_DTSEC10:
+			sprintf(alias, "phy_sgmii_s3_%x", phy);
+			fdt_set_phy_handle(fdt, compat, addr, alias);
+			fdt_status_okay_by_alias(fdt, "emi1_slot3");
+			break;
+		case FM1_DTSEC5:
+		case FM1_DTSEC6:
+			if (mdio_mux[port] == EMI1_SLOT1) {
+				sprintf(alias, "phy_sgmii_s1_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot1");
+			} else if (mdio_mux[port] == EMI1_SLOT2) {
+				sprintf(alias, "phy_sgmii_s2_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+			}
+			break;
+		default:
+			break;
+		}
+
+	} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
+		switch (srds_s1) {
+		case 0x66: /* XFI interface */
+		case 0x6b:
+		case 0x6c:
+		case 0x6d:
+		case 0x71:
+			f_link.phy_id = port;
+			f_link.duplex = 1;
+			f_link.link_speed = 10000;
+			f_link.pause = 0;
+			f_link.asym_pause = 0;
+			/* no PHY for XFI */
+			fdt_delprop(fdt, offset, "phy-handle");
+			fdt_setprop(fdt, offset, "fixed-link", &f_link,
+				    sizeof(f_link));
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	return;
+}
+
+/*
+ * This function reads RCW to check if Serdes1{E,F,G,H} is configured
+ * as slot 1/2/3 and update the lane_to_slot[] array accordingly
+ */
+static void initialize_lane_to_slot(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	switch (srds_s1) {
+	case 0x51:
+	case 0x5f:
+	case 0x65:
+	case 0x6b:
+	case 0x71:
+		lane_to_slot[5] = 2;
+		lane_to_slot[6] = 2;
+		lane_to_slot[7] = 2;
+		break;
+	case 0xa6:
+	case 0x8e:
+	case 0x8f:
+	case 0x82:
+	case 0x83:
+	case 0xd3:
+	case 0xd9:
+	case 0xcb:
+		lane_to_slot[6] = 2;
+		lane_to_slot[7] = 2;
+		break;
+	case 0xda:
+		lane_to_slot[4] = 3;
+		lane_to_slot[5] = 3;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 3;
+		break;
+	default:
+		break;
+	}
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+	int i, idx, lane, slot, interface;
+	struct memac_mdio_info dtsec_mdio_info;
+	struct memac_mdio_info tgec_mdio_info;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) &
+					FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	initialize_lane_to_slot();
+
+	/* Initialize the mdio_mux array so we can recognize empty elements */
+	for (i = 0; i < NUM_FM_PORTS; i++)
+		mdio_mux[i] = EMI_NONE;
+
+	dtsec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+	/* Register the muxing front-ends to the MDIO buses */
+	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
+	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
+	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+	T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+	T2080qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+
+	/* Set the two on-board RGMII PHY address */
+	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+	if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+			FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII)
+		fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+	else
+		fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR);
+
+	switch (srds_s1) {
+	case 0x1c:
+	case 0x95:
+	case 0xa2:
+	case 0x94:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	case 0x51:
+	case 0x5f:
+	case 0x65:
+		/* XAUI/HiGig in Slot3 */
+		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	case 0x66:
+		/*
+		 * XFI does not need a PHY to work, but to avoid U-boot use
+		 * default PHY address which is zero to a MAC when it found
+		 * a MAC has no PHY address, we give a PHY address to XFI
+		 * MAC, and should not use a real XAUI PHY address, since
+		 * MDIO can access it successfully, and then MDIO thinks
+		 * the XAUI card is used for the XFI MAC, which will cause
+		 * error.
+		 */
+		fm_info_set_phy_address(FM1_10GEC1, 4);
+		fm_info_set_phy_address(FM1_10GEC2, 5);
+		fm_info_set_phy_address(FM1_10GEC3, 6);
+		fm_info_set_phy_address(FM1_10GEC4, 7);
+		break;
+	case 0x6b:
+		fm_info_set_phy_address(FM1_10GEC1, 4);
+		fm_info_set_phy_address(FM1_10GEC2, 5);
+		fm_info_set_phy_address(FM1_10GEC3, 6);
+		fm_info_set_phy_address(FM1_10GEC4, 7);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	case 0x6c:
+	case 0x6d:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	case 0x71:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	case 0xa6:
+	case 0x8e:
+	case 0x8f:
+	case 0x82:
+	case 0x83:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	case 0xa4:
+	case 0x96:
+	case 0x8a:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	case 0xd9:
+	case 0xd3:
+	case 0xcb:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	default:
+		puts("Invalid SerDes1 protocol for T2080QDS\n");
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		idx = i - FM1_DTSEC1;
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+					SGMII_FM1_DTSEC1 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot[lane];
+			debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+			      idx + 1, slot);
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
+
+			switch (slot) {
+			case 1:
+				mdio_mux[i] = EMI1_SLOT1;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 2:
+				mdio_mux[i] = EMI1_SLOT2;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			};
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			if (i == FM1_DTSEC3)
+				mdio_mux[i] = EMI1_RGMII1;
+			else if (i == FM1_DTSEC4 || FM1_DTSEC10)
+				mdio_mux[i] = EMI1_RGMII2;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+		idx = i - FM1_10GEC1;
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			if (srds_s1 == 0x51) {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
+						XAUI_FM1_MAC9 + idx);
+			} else if ((srds_s1 == 0x5f) || (srds_s1 == 0x65)) {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
+						HIGIG_FM1_MAC9 + idx);
+			} else {
+				if (i == FM1_10GEC1 || i == FM1_10GEC2)
+					lane = serdes_get_first_lane(FSL_SRDS_1,
+						XFI_FM1_MAC9 + idx);
+				else
+					lane = serdes_get_first_lane(FSL_SRDS_1,
+						XFI_FM1_MAC1 + idx);
+			}
+
+			if (lane < 0)
+				break;
+			mdio_mux[i] = EMI2;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+
+			if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) ||
+			    (srds_s1 == 0x6c) || (srds_s1 == 0x6d) ||
+			    (srds_s1 == 0x71)) {
+				/* As XFI is in cage intead of a slot, so
+				 * ensure doesn't disable the corresponding port
+				 */
+				break;
+			}
+
+			slot = lane_to_slot[lane];
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
+			break;
+		default:
+			break;
+		}
+	}
+
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+	return pci_eth_init(bis);
+}

board/freescale/t2080qds/law.c

@@ -0,0 +1,34 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef QIXIS_BASE_PHYS
+	SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	/* Limit DCSR to 32M to access NPC Trace Buffer */
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);

board/freescale/t2080qds/pci.c

@@ -0,0 +1,23 @@
+/*
+ * Copyright 2007-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}

board/freescale/t2080qds/t2080_pbi.cfg

@@ -0,0 +1,41 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Refer doc/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Errata for slowing down the MDC clock to make it <= 2.5 MHZ
+094fc030 00008148
+094fd030 00008148
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000

board/freescale/t2080qds/t2080_rcw.cfg

@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#SerDes Protocol: 0x66_0x16
+#Core/DDR: 1533Mhz/2133MT/s
+12100017 15000000 00000000 00000000
+66160002 00008400 e8104000 c1000000
+00000000 00000000 00000000 000307fc
+00000000 00000000 00000000 00000004

board/freescale/t2080qds/t2080qds.c

@@ -0,0 +1,324 @@
+/*
+ * Copyright 2009-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "t2080qds.h"
+#include "t2080qds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	char buf[64];
+	u8 sw;
+	struct cpu_type *cpu = gd->arch.cpu;
+	static const char *freq[4] = {
+		"100.00MHZ(from 8T49N222A)", "125.00MHz",
+		"156.25MHZ", "100.00MHz"
+	};
+
+	printf("Board: %sQDS, ", cpu->name);
+	sw = QIXIS_READ(arch);
+	printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
+	printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	if (sw < 0x8)
+		printf("vBank%d\n", sw);
+	else if (sw == 0x8)
+		puts("Promjet\n");
+	else if (sw == 0x9)
+		puts("NAND\n");
+	else
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+	printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver),
+	       qixis_read_tag(buf), (int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+
+	puts("SERDES Reference Clocks:\n");
+	sw = QIXIS_READ(brdcfg[2]);
+	printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[sw >> 6],
+	       freq[(sw >> 4) & 0x3]);
+	printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[(sw & 0xf) >> 2],
+	       freq[sw & 0x3]);
+
+	return 0;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int brd_mux_lane_to_slot(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1, srds_prtcl_s2;
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+	switch (srds_prtcl_s1) {
+	case 0:
+		/* SerDes1 is not enabled */
+		break;
+	case 0x1c:
+	case 0x95:
+	case 0xa2:
+	case 0x94:
+		/* SD1(A:D) => SLOT3 SGMII
+		 * SD1(G:H) => SLOT1 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x58);
+		break;
+	case 0x51:
+		/* SD1(A:D) => SLOT3 XAUI
+		 * SD1(E)   => SLOT1 PCIe4
+		 * SD1(F:H) => SLOT2 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x15);
+		break;
+	case 0x66:
+	case 0x67:
+		/* SD1(A:D) => XFI cage
+		 * SD1(E:H) => SLOT1 PCIe4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xfe);
+		break;
+	case 0x6b:
+		/* SD1(A:D) => XFI cage
+		 * SD1(E)   => SLOT1 PCIe4
+		 * SD1(F:H) => SLOT2 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xf1);
+		break;
+	case 0x6c:
+	case 0x6d:
+		/* SD1(A:B) => XFI cage
+		 * SD1(C:D) => SLOT3 SGMII
+		 * SD1(E:H) => SLOT1 PCIe4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xda);
+		break;
+	default:
+		printf("WARNING: unsupported for SerDes1 Protocol %d\n",
+		       srds_prtcl_s1);
+		return -1;
+	}
+
+	switch (srds_prtcl_s2) {
+	case 0:
+		/* SerDes2 is not enabled */
+		break;
+	case 0x01:
+	case 0x02:
+		/* SD2(A:H) => SLOT4 PCIe1 */
+		QIXIS_WRITE(brdcfg[13], 0x20);
+		break;
+	case 0x15:
+	case 0x16:
+		/*
+		 * SD2(A:D) => SLOT4 PCIe1
+		 * SD2(E:F) => SLOT5 PCIe2
+		 * SD2(G:H) => SATA1,SATA2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0xb0);
+		break;
+	case 0x18:
+		/*
+		 * SD2(A:D) => SLOT4 PCIe1
+		 * SD2(E:F) => SLOT5 Aurora
+		 * SD2(G:H) => SATA1,SATA2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0x70);
+		break;
+	case 0x1f:
+		/*
+		 * SD2(A:D) => SLOT4 PCIe1
+		 * SD2(E:H) => SLOT5 PCIe2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0xa0);
+		break;
+	case 0x29:
+	case 0x2d:
+	case 0x2e:
+		/*
+		 * SD2(A:D) => SLOT4 SRIO2
+		 * SD2(E:H) => SLOT5 SRIO1
+		 */
+		QIXIS_WRITE(brdcfg[13], 0x50);
+		break;
+	default:
+		printf("WARNING: unsupported for SerDes2 Protocol %d\n",
+		       srds_prtcl_s2);
+		return -1;
+	}
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	/* Disable remote I2C connection to qixis fpga */
+	QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
+
+	brd_mux_lane_to_slot();
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+	/* use accurate clock measurement */
+	int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
+	int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+	u32 val;
+
+	val =  freq * base;
+	if (val) {
+		debug("SYS Clock measurement is: %d\n", val);
+		return val;
+	} else {
+		printf("Warning: SYS clock measurement is invalid, ");
+		printf("using value from brdcfg1.\n");
+	}
+#endif
+
+	switch (sysclk_conf & 0x0F) {
+	case QIXIS_SYSCLK_83:
+		return 83333333;
+	case QIXIS_SYSCLK_100:
+		return 100000000;
+	case QIXIS_SYSCLK_125:
+		return 125000000;
+	case QIXIS_SYSCLK_133:
+		return 133333333;
+	case QIXIS_SYSCLK_150:
+		return 150000000;
+	case QIXIS_SYSCLK_160:
+		return 160000000;
+	case QIXIS_SYSCLK_166:
+		return 166666666;
+	}
+	return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+	/* use accurate clock measurement */
+	int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
+	int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+	u32 val;
+
+	val =  freq * base;
+	if (val) {
+		debug("DDR Clock measurement is: %d\n", val);
+		return val;
+	} else {
+		printf("Warning: DDR clock measurement is invalid, ");
+		printf("using value from brdcfg1.\n");
+	}
+#endif
+
+	switch ((ddrclk_conf & 0x30) >> 4) {
+	case QIXIS_DDRCLK_100:
+		return 100000000;
+	case QIXIS_DDRCLK_125:
+		return 125000000;
+	case QIXIS_DDRCLK_133:
+		return 133333333;
+	}
+	return 66666666;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+	fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+}

board/freescale/t2080qds/t2080qds.h

@@ -0,0 +1,13 @@
+/*
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif