armv8: LS2080A: Adjust memory map for secure boot headers for NOR-boot

This patch adjusts memory map for secure boot headers on LS2080AQDS
and LS2080ARDB platforms. Secure boot headers are placed on NOR
flash at offset 0x00600000.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

board/freescale/ls2080aqds/README

@@ -96,6 +96,7 @@ RCW+PBI				0x00000000
 Boot firmware (U-Boot)		0x00100000
 Boot firmware Environment	0x00300000
 PPA firmware			0x00400000
+Secure Headers			0x00600000
 DPAA2 MC			0x00A00000
 DPAA2 DPL			0x00D00000
 DPAA2 DPC			0x00E00000

board/freescale/ls2080ardb/README

@@ -92,6 +92,7 @@ RCW+PBI				0x00000000
 Boot firmware (U-Boot)		0x00100000
 Boot firmware Environment	0x00300000
 PPA firmware			0x00400000
+Secure Headers			0x00600000
 Cortina PHY firmware		0x00980000
 DPAA2 MC			0x00A00000
 DPAA2 DPL			0x00D00000

include/configs/ls2080aqds.h

@@ -359,14 +359,14 @@ unsigned long get_board_ddr_clk(void);
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581100000\0"		\
+	"kernel_start=0x581000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"mcmemsize=0x40000000\0"		\
-	"mcinitcmd=esbc_validate 0x580c80000;"  \
-	"esbc_validate 0x580cc0000;"            \
-	"fsl_mc start mc 0x580300000"           \
-	" 0x580800000 \0"
+	"mcinitcmd=esbc_validate 0x580700000;"  \
+	"esbc_validate 0x580740000;"            \
+	"fsl_mc start mc 0x580a00000"           \
+	" 0x580e00000 \0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\

include/configs/ls2080ardb.h

@@ -378,15 +378,15 @@ unsigned long get_board_sys_clk(void);
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581100000\0"		\
+	"kernel_start=0x581000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"mcmemsize=0x40000000\0"		\
 	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=esbc_validate 0x580c80000;"  \
-	"esbc_validate 0x580cc0000;"            \
-	"fsl_mc start mc 0x580300000"           \
-	" 0x580800000 \0"                       \
+	"mcinitcmd=esbc_validate 0x580700000;"  \
+	"esbc_validate 0x580740000;"            \
+	"fsl_mc start mc 0x580a00000"           \
+	" 0x580e00000 \0"                       \
 	BOOTENV
 #else
 #ifdef CONFIG_QSPI_BOOT