mx6: Select MX6QDL option via Kconfig

Currently the MX6QDL option is selected via CONFIG_SYS_EXTRA_OPTIONS,
but it is better to select it directly via Kconfig.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

arch/arm/mach-imx/mx6/Kconfig

@@ -109,6 +109,7 @@ config TARGET_ARISTAINETOS2B
 
 config TARGET_CGTQMX6EVAL
 	bool "cgtqmx6eval"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select DM
@@ -117,6 +118,7 @@ config TARGET_CGTQMX6EVAL
 config TARGET_CM_FX6
 	bool "CM-FX6"
 	select SUPPORT_SPL
+	select MX6QDL
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
@@ -131,6 +133,7 @@ config TARGET_COLIBRI_IMX6
 
 config TARGET_DHCOMIMX6
 	bool "dh_imx6"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select BOARD_EARLY_INIT_F
 	select SUPPORT_SPL
@@ -165,6 +168,7 @@ config TARGET_GE_B850V3
 
 config TARGET_GW_VENTANA
 	bool "gw_ventana"
+	select MX6QDL
 	select SUPPORT_SPL
 	imply CMD_SATA
 	imply CMD_SPL
@@ -176,10 +180,12 @@ config TARGET_KOSAGI_NOVENA
 
 config TARGET_MCCMON6
 	bool "mccmon6"
+	select MX6QDL
 	select SUPPORT_SPL
 
 config TARGET_MX6CUBOXI
 	bool "Solid-run mx6 boards"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 
@@ -231,6 +237,7 @@ config TARGET_MX6Q_ICORE_RQS
 
 config TARGET_MX6SABREAUTO
 	bool "mx6sabreauto"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select DM
@@ -239,6 +246,7 @@ config TARGET_MX6SABREAUTO
 
 config TARGET_MX6SABRESD
 	bool "mx6sabresd"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select DM
@@ -360,6 +368,7 @@ config TARGET_PCM058
 
 config TARGET_PFLA02
 	bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 
@@ -378,6 +387,7 @@ config TARGET_TQMA6
 
 config TARGET_UDOO
 	bool "udoo"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 
@@ -398,6 +408,7 @@ config TARGET_SAMTEC_VINING_2000
 
 config TARGET_WANDBOARD
 	bool "wandboard"
+	select MX6QDL
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 

configs/cgtqmx6eval_defconfig

@@ -10,7 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/cm_fx6_defconfig

@@ -13,7 +13,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-cm-fx6"
 CONFIG_AHCI=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80

configs/dh_imx6_defconfig

@@ -10,7 +10,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SPL=y

configs/gwventana_emmc_defconfig

@@ -14,7 +14,7 @@ CONFIG_CMD_HDMIDETECT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_SYS_STDIO_DEREGISTER is not set
 # CONFIG_DISPLAY_BOARDINFO is not set

configs/gwventana_gw5904_defconfig

@@ -14,7 +14,7 @@ CONFIG_CMD_HDMIDETECT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_SYS_STDIO_DEREGISTER is not set
 # CONFIG_DISPLAY_BOARDINFO is not set

configs/gwventana_nand_defconfig

@@ -15,7 +15,7 @@ CONFIG_CMD_HDMIDETECT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_SYS_STDIO_DEREGISTER is not set
 # CONFIG_DISPLAY_BOARDINFO is not set

configs/mccmon6_nor_defconfig

@@ -5,7 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_MCCMON6=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 # CONFIG_CMD_BMODE is not set
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg"
 CONFIG_SPL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_ENV_SUPPORT=y

configs/mccmon6_sd_defconfig

@@ -6,7 +6,7 @@ CONFIG_TARGET_MCCMON6=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 # CONFIG_CMD_BMODE is not set
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg"
 CONFIG_SPL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_ENV_SUPPORT=y

configs/mx6cuboxi_defconfig

@@ -11,7 +11,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 # CONFIG_CMD_BMODE is not set
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_SYS_STDIO_DEREGISTER is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y

configs/mx6sabreauto_defconfig

@@ -8,7 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/mx6sabresd_defconfig

@@ -8,7 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/pfla02_defconfig

@@ -12,7 +12,7 @@ CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y

configs/udoo_defconfig

@@ -8,7 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y

configs/wandboard_defconfig

@@ -10,7 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_HDMIDETECT=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y