rockchip: jerry: Enable EDP and HDMI video output

Enable these devices using the VOPL video output device. We explicitly
disable VOPB in the device tree to avoid it taking over. Since this device
has an LCD display this comes up by default. If the display fails for some
reason then it will attempt to use HDMI. It is possible to force it to fail
(and thus fall back to HDMI) by puting 'return -EPERM' at the top of
rk_edp_probe(). For now there is no easy way to select between the two.

Signed-off-by: Simon Glass <sjg@chromium.org>

arch/arm/dts/rk3288-jerry.dts

@@ -108,6 +108,11 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
+&vopb {
+	/* Disable this so that we use vopl */
+	status = "disabled";
+};
+
 &edp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&edp_hpd>;

arch/arm/dts/rk3288.dtsi

@@ -692,6 +692,7 @@
 		iommus = <&vopl_mmu>;
 		power-domains = <&power RK3288_PD_VIO>;
 		status = "disabled";
+		u-boot,dm-pre-reloc;
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;

configs/chromebook_jerry_defconfig

@@ -42,7 +42,10 @@ CONFIG_DM_PMIC=y
 # CONFIG_SPL_PMIC_CHILDREN is not set
 CONFIG_PMIC_RK808=y
 CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK808=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y
 CONFIG_DEBUG_UART=y
@@ -51,6 +54,9 @@ CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_ROCKCHIP_SPI=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_ROTATION=y
+CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_USE_PRIVATE_LIBGCC=y
 CONFIG_USE_TINY_PRINTF=y
 CONFIG_CMD_DHRYSTONE=y

include/configs/chromebook_jerry.h

@@ -9,8 +9,8 @@
 
 #define ROCKCHIP_DEVICE_SETTINGS \
 		"stdin=serial,cros-ec-keyb\0" \
-		"stdout=serial\0" \
-		"stderr=serial\0"
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
 
 #include <configs/rk3288_common.h>
 
@@ -30,4 +30,8 @@
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
 
+#define CONFIG_I2C_EDID
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES		10
+
 #endif