armv7: ls1021a: Drop macro CONFIG_LS102XA

Use CONFIG_ARCH_LS1021A instead.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/arm/cpu/armv7/Makefile

@@ -12,7 +12,7 @@ obj-y	+= cache_v7.o cache_v7_asm.o
 obj-y	+= cpu.o cp15.o
 obj-y	+= syslib.o
 
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_LS102XA),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_ARCH_LS1021A),)
 ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
 obj-y	+= lowlevel_init.o
 endif

arch/arm/dts/Makefile

@@ -166,7 +166,7 @@ dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
 	am571x-idk.dtb
 dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
-dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
+dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
 	ls1021a-qds-lpuart.dtb \
 	ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
 	ls1021a-iot-duart.dtb

arch/arm/include/asm/arch-ls102xa/config.h

@@ -108,7 +108,7 @@
 
 #define DCU_LAYER_MAX_NUM			16
 
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #else

arch/arm/include/asm/config.h

@@ -14,7 +14,7 @@
 #define CONFIG_STATIC_RELA
 #endif
 
-#if defined(CONFIG_LS102XA) || \
+#if defined(CONFIG_ARCH_LS1021A) || \
 	defined(CONFIG_CPU_PXA27X) || \
 	defined(CONFIG_CPU_MONAHANS) || \
 	defined(CONFIG_CPU_PXA25X) || \

board/freescale/common/arm_sleep.c

@@ -13,7 +13,7 @@
 #endif
 #include <asm/armv7.h>
 
-#if defined(CONFIG_LS102XA)
+#if defined(CONFIG_ARCH_LS1021A)
 #include <asm/arch/immap_ls102xa.h>
 #endif
 
@@ -66,7 +66,7 @@ static void dp_ddr_restore(void)
 		*dst++ = *src++;
 }
 
-#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA)
+#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_ARCH_LS1021A)
 void ls1_psci_resume_fixup(void)
 {
 	u32 tmp;
@@ -104,7 +104,7 @@ static void dp_resume_prepare(void)
 #ifdef CONFIG_U_QE
 	u_qe_resume();
 #endif
-#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA)
+#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_ARCH_LS1021A)
 	ls1_psci_resume_fixup();
 #endif
 }

board/freescale/common/fsl_chain_of_trust.c

@@ -22,7 +22,7 @@
 #include <asm/fsl_pamu.h>
 #endif
 
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 #include <asm/arch/immap_ls102xa.h>
 #endif
 

board/freescale/common/fsl_validate.c

@@ -15,7 +15,7 @@
 #include <u-boot/rsa-mod-exp.h>
 #include <hash.h>
 #include <fsl_secboot_err.h>
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 #include <asm/arch/immap_ls102xa.h>
 #endif
 

drivers/i2c/mxc_i2c.c

@@ -589,7 +589,7 @@ static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
 #endif
 
 static struct mxc_i2c_bus mxc_i2c_buses[] = {
-#if defined(CONFIG_LS102XA) || defined(CONFIG_VF610) || \
+#if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_VF610) || \
 	defined(CONFIG_FSL_LAYERSCAPE)
 	{ 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
 	{ 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },

drivers/qe/qe.c

@@ -13,7 +13,7 @@
 #include <asm/io.h>
 #include <linux/immap_qe.h>
 #include <fsl_qe.h>
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 #include <asm/arch/immap_ls102xa.h>
 #endif
 
@@ -355,7 +355,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 	size_t length;
 	const struct qe_header *hdr;
 #ifdef CONFIG_DEEP_SLEEP
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 #else
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -494,7 +494,7 @@ int u_qe_upload_firmware(const struct qe_firmware *firmware)
 	size_t length;
 	const struct qe_header *hdr;
 #ifdef CONFIG_DEEP_SLEEP
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 #else
 	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);

drivers/usb/common/fsl-errata.c

@@ -204,7 +204,7 @@ bool has_erratum_a010151(void)
 	case SVR_LS1043A:
 		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
 #endif
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 	case SOC_VER_LS1020:
 	case SOC_VER_LS1021:
 	case SOC_VER_LS1022:

include/configs/ls1021aiot.h

@@ -7,8 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_LS102XA
-
 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
 
 #define CONFIG_SYS_FSL_CLK

include/configs/ls1021aqds.h

@@ -7,8 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_LS102XA
-
 #define CONFIG_ARMV7_PSCI_1_0
 
 #define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR

include/configs/ls1021atwr.h

@@ -7,8 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_LS102XA
-
 #define CONFIG_ARMV7_PSCI_1_0
 
 #define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR

include/fsl_errata.h

@@ -10,7 +10,7 @@
 #include <common.h>
 #if defined(CONFIG_PPC)
 #include <asm/processor.h>
-#elif defined(CONFIG_LS102XA)
+#elif defined(CONFIG_ARCH_LS1021A)
 #include <asm/arch-ls102xa/immap_ls102xa.h>
 #elif defined(CONFIG_FSL_LAYERSCAPE)
 #include <asm/arch/soc.h>
@@ -66,7 +66,7 @@ static inline bool has_erratum_a008378(void)
 
 
 	switch (soc) {
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 	case SOC_VER_LS1020:
 	case SOC_VER_LS1021:
 	case SOC_VER_LS1022:

include/linux/immap_qe.h

@@ -24,7 +24,7 @@
 #endif
 #endif
 
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 #define QE_MURAM_SIZE          0x6000UL
 #define MAX_QE_RISC            1
 #define QE_NUM_OF_SNUM         28

include/linux/usb/xhci-fsl.h

@@ -54,7 +54,7 @@ struct fsl_xhci {
 	struct dwc3 *dwc3_reg;
 };
 
-#if defined(CONFIG_LS102XA) || defined(CONFIG_ARCH_LS1012A)
+#if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_ARCH_LS1012A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0

include/tsec.h

@@ -20,7 +20,7 @@
 
 #ifndef CONFIG_DM_ETH
 
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 #define TSEC_SIZE		0x40000
 #define TSEC_MDIO_OFFSET	0x40000
 #else

include/usb/ehci-ci.h

@@ -159,7 +159,7 @@
 #elif defined(CONFIG_MPC512X)
 #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR
 #define CONFIG_SYS_FSL_USB2_ADDR	0
-#elif defined(CONFIG_LS102XA)
+#elif defined(CONFIG_ARCH_LS1021A)
 #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_EHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_USB2_ADDR        0
 #endif

scripts/config_whitelist.txt

@@ -1697,7 +1697,6 @@ CONFIG_LPC_IO_BASE
 CONFIG_LPUART
 CONFIG_LPUART_32B_REG
 CONFIG_LQ038J7DH53
-CONFIG_LS102XA
 CONFIG_LS102XA_STREAM_ID
 CONFIG_LSCHLV2
 CONFIG_LSXHL