cfi_flash: Fix missing/superfluous lines

There should be no consecutive blank lines, and no blank lines at the
end of blocks. But there should be blank lines between variable
declarations and code. Fix all instances where either occurs.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>

drivers/mtd/cfi_flash.c

@@ -269,6 +269,7 @@ static void flash_printqry(struct cfi_qry *qry)
 		debug(" ");
 		for (y = 0; y < 16; y++) {
 			unsigned char c = p[x + y];
+
 			if (c >= 0x20 && c <= 0x7e)
 				debug("%c", c);
 			else
@@ -279,7 +280,6 @@ static void flash_printqry(struct cfi_qry *qry)
 }
 #endif
 
-
 /*-----------------------------------------------------------------------
  * read a character at a port width address
  */
@@ -311,7 +311,6 @@ static inline ushort flash_read_word(flash_info_t *info, uint offset)
 	return retval;
 }
 
-
 /*-----------------------------------------------------------------------
  * read a long word by picking the least significant byte of each maximum
  * port size word. Swap for ppc format.
@@ -356,7 +355,6 @@ static ulong flash_read_long (flash_info_t *info, flash_sect_t sect,
 static void flash_write_cmd(flash_info_t *info, flash_sect_t sect,
 			    uint offset, u32 cmd)
 {
-
 	void *addr;
 	cfiword_t cword;
 
@@ -1048,7 +1046,6 @@ out_unmap:
 }
 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
-
 /*-----------------------------------------------------------------------
  */
 int flash_erase(flash_info_t *info, int s_first, int s_last)
@@ -1080,7 +1077,6 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 		putc('\n');
 	}
 
-
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (ctrlc()) {
 			printf("\n");
@@ -1154,6 +1150,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 			if (use_flash_status_poll(info)) {
 				cfiword_t cword;
 				void *dest;
+
 				cword.w64 = 0xffffffffffffffffULL;
 				dest = flash_map(info, sect, 0);
 				st = flash_status_poll(info, &cword, dest,
@@ -1494,7 +1491,6 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 			else
 				flash_write_cmd(info, sector, 0,
 					FLASH_CMD_PROTECT_CLEAR);
-
 		}
 		break;
 	case CFI_CMDSET_AMD_EXTENDED:
@@ -1579,7 +1575,6 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 	if ((retcode =
 	     flash_full_status_check(info, sector, info->erase_blk_tout,
 				      prot ? "protect" : "unprotect")) == 0) {
-
 		info->protect[sector] = prot;
 
 		/*
@@ -1887,6 +1882,7 @@ static void __flash_cmd_reset(flash_info_t *info)
 	udelay(1);
 	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
 }
+
 void flash_cmd_reset(flash_info_t *info)
 	__attribute__((weak, alias("__flash_cmd_reset")));
 
@@ -2370,6 +2366,7 @@ unsigned long flash_init(void)
 #ifdef CONFIG_SYS_FLASH_PROTECTION
 	/* read environment from EEPROM */
 	char s[64];
+
 	env_get_f("unlock", s, sizeof(s));
 #endif