tegra: Introduce SRAM repair on tegra124

This is required in order to avoid instability when running from caches
after the kernel starts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

arch/arm/include/asm/arch-tegra124/flow.h

@@ -26,6 +26,12 @@ struct flow_ctlr {
 	u32 cpu_pwr_csr;	/* offset 0x38 */
 	u32 mpid;		/* offset 0x3c */
 	u32 ram_repair;		/* offset 0x40 */
+	u32 flow_dbg_sel;	/* offset 0x44 */
+	u32 flow_dbg_cnt0;	/* offset 0x48 */
+	u32 flow_dbg_cnt1;	/* offset 0x4c */
+	u32 flow_dbg_qual;	/* offset 0x50 */
+	u32 flow_ctlr_spare;	/* offset 0x54 */
+	u32 ram_repair_cluster1;/* offset 0x58 */
 };
 
 /* HALT_COP_EVENTS_0, 0x04 */
@@ -43,4 +49,10 @@ struct flow_ctlr {
 #define CSR_WAIT_WFI_SHIFT	8
 #define CSR_PWR_OFF_STS		(1 << 16)
 
+/* RAM_REPAIR, 0x40, 0x58 */
+enum {
+	RAM_REPAIR_REQ = 0x1 << 0,
+	RAM_REPAIR_STS = 0x1 << 1,
+};
+
 #endif	/*  _TEGRA124_FLOW_H_ */

arch/arm/mach-tegra/powergate.c

@@ -9,7 +9,7 @@
 
 #include <asm/io.h>
 #include <asm/types.h>
-
+#include <asm/arch/flow.h>
 #include <asm/arch/powergate.h>
 #include <asm/arch/tegra.h>
 
@@ -75,11 +75,29 @@ static int tegra_powergate_remove_clamping(enum tegra_powergate id)
 	return 0;
 }
 
+static void tegra_powergate_ram_repair(void)
+{
+#ifdef CONFIG_TEGRA124
+	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+
+	/* Request RAM repair for cluster 0 and wait until complete */
+	setbits_le32(&flow->ram_repair, RAM_REPAIR_REQ);
+	while (!(readl(&flow->ram_repair) & RAM_REPAIR_STS))
+		;
+
+	/* Same for cluster 1 */
+	setbits_le32(&flow->ram_repair_cluster1, RAM_REPAIR_REQ);
+	while (!(readl(&flow->ram_repair_cluster1) & RAM_REPAIR_STS))
+		;
+#endif
+}
+
 int tegra_powergate_sequence_power_up(enum tegra_powergate id,
 				      enum periph_id periph)
 {
 	int err;
 
+	tegra_powergate_ram_repair();
 	reset_set_enable(periph, 1);
 
 	err = tegra_powergate_power_on(id);