powerpc: T1040RDB: Remove macro CONFIG_T1040RDB

Use CONFIG_TARGET_T1040RDB instead.

Signed-off-by: York Sun <york.sun@nxp.com>

board/freescale/t104xrdb/eth.c

@@ -43,7 +43,7 @@ int board_eth_init(bd_t *bis)
 		int idx = i - FM1_DTSEC1;
 
 		switch (fm_info_get_enet_if(i)) {
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
+#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 		case PHY_INTERFACE_MODE_SGMII:
 			/* T1040RDB & T1040D4RDB only supports SGMII on
 			 * DTSEC3

configs/T1040RDB_NAND_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_SDCARD_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_SECURE_BOOT_defconfig

@@ -6,7 +6,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT,T1040RDB"
+CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_SPIFLASH_defconfig

@@ -13,7 +13,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_defconfig

@@ -5,7 +5,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

include/configs/T104xRDB.h

@@ -56,7 +56,7 @@
 #define CONFIG_SYS_NAND_U_BOOT_START	0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
 #endif
@@ -90,7 +90,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
 #ifndef CONFIG_SPL_BUILD
 #define	CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
 #endif
@@ -124,7 +124,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 #ifndef CONFIG_SPL_BUILD
 #define	CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 #endif
@@ -758,7 +758,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
+#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 #elif defined(CONFIG_TARGET_T1040D4RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
@@ -777,10 +777,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
+#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 #define CONFIG_VSC9953
 #define CONFIG_CMD_ETHSW
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x04
 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x08
 #else
@@ -881,7 +881,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define __USB_PHY_TYPE	utmi
 #define RAMDISKFILE	"t104xrdb/ramdisk.uboot"
 
-#ifdef CONFIG_T1040RDB
+#ifdef CONFIG_TARGET_T1040RDB
 #define FDTFILE		"t1040rdb/t1040rdb.dtb"
 #elif defined(CONFIG_T1042RDB_PI)
 #define FDTFILE		"t1042rdb_pi/t1042rdb_pi.dtb"

scripts/config_whitelist.txt

@@ -7828,7 +7828,6 @@ CONFIG_SYS_i2C_FSL
 CONFIG_T1023RDB
 CONFIG_T1024RDB
 CONFIG_T1040QDS
-CONFIG_T1040RDB
 CONFIG_T1042D4RDB
 CONFIG_T1042RDB
 CONFIG_T1042RDB_PI