|
@@ -17,22 +17,6 @@ config SYS_SOC
|
|
|
config SYS_CONFIG_NAME
|
|
|
default "pdu001"
|
|
|
|
|
|
-config CONS_INDEX
|
|
|
- int "UART used for console"
|
|
|
- range 1 6
|
|
|
- default 4
|
|
|
- help
|
|
|
- The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
|
|
|
- in documentation, etc) available to it. The best choice for the
|
|
|
- PDU001 is UART3 as it is wired to the header K2; enter 4 here to
|
|
|
- use UART3. UART0 is connected to the EIA-485 transceiver. If you
|
|
|
- really need to use it, you are advised to remove the transceiver U14
|
|
|
- from the board. UART1 is wired to the backplane and therefore
|
|
|
- accessible from there or by the backplane connector K1 of the PDU.
|
|
|
- Any other UART then UART3 (enter 4 here), UART1 (enter 2 here) or
|
|
|
- UART0 (enter 1 here) are not sensible since they are not wired to
|
|
|
- any connector and therefore difficult to access.
|
|
|
-
|
|
|
choice
|
|
|
prompt "State of Run LED"
|
|
|
default PDU001_RUN_LED_RED
|