powerpc: ppc4xx: remove W7OLMC/W7OLMG board support

They have not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Erik Theisen <etheisen@mindspring.com>

arch/powerpc/cpu/ppc4xx/Kconfig

@@ -32,12 +32,6 @@ config TARGET_SC3
 config TARGET_T3CORP
 	bool "Support t3corp"
 
-config TARGET_W7OLMC
-	bool "Support W7OLMC"
-
-config TARGET_W7OLMG
-	bool "Support W7OLMG"
-
 config TARGET_ZEUS
 	bool "Support zeus"
 
@@ -212,7 +206,6 @@ source "board/prodrive/p3p440/Kconfig"
 source "board/sbc405/Kconfig"
 source "board/sc3/Kconfig"
 source "board/t3corp/Kconfig"
-source "board/w7o/Kconfig"
 source "board/xes/xpedite1000/Kconfig"
 source "board/xilinx/ml507/Kconfig"
 source "board/xilinx/ppc405-generic/Kconfig"

board/w7o/Kconfig

@@ -1,19 +0,0 @@
-if TARGET_W7OLMC
-
-config SYS_BOARD
-	default "w7o"
-
-config SYS_CONFIG_NAME
-	default "W7OLMC"
-
-endif
-
-if TARGET_W7OLMG
-
-config SYS_BOARD
-	default "w7o"
-
-config SYS_CONFIG_NAME
-	default "W7OLMG"
-
-endif

board/w7o/MAINTAINERS

@@ -1,8 +0,0 @@
-W7O BOARD
-M:	Erik Theisen <etheisen@mindspring.com>
-S:	Maintained
-F:	board/w7o/
-F:	include/configs/W7OLMC.h
-F:	configs/W7OLMC_defconfig
-F:	include/configs/W7OLMG.h
-F:	configs/W7OLMG_defconfig

board/w7o/Makefile

@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= w7o.o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \
-	  watchdog.o
-obj-y	+= init.o post1.o

board/w7o/cmd_vpd.c

@@ -1,48 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-
-#if defined(CONFIG_CMD_BSP)
-
-#include "vpd.h"
-
-/* ======================================================================
- * Interpreter command to retrieve board specific Vital Product Data, "VPD"
- * ======================================================================
- */
-int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	VPD vpd;			/* Board specific data struct */
-	uchar dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
-
-	/* Validate usage */
-	if (argc > 2)
-		return cmd_usage(cmdtp);
-
-	/* Passed in EEPROM address */
-	if (argc == 2)
-		dev_addr = (uchar) simple_strtoul (argv[1], NULL, 16);
-
-	/* Read VPD and output it */
-	if (!vpd_get_data (dev_addr, &vpd)) {
-		vpd_print (&vpd);
-		return 0;
-	}
-
-	return 1;
-}
-
-U_BOOT_CMD(
-	  vpd,	2,	1,	do_vpd,
-	  "Read Vital Product Data",
-	  "[dev_addr]\n"
-	  "        - Read VPD Data from default address, or device address 'dev_addr'."
-);
-
-#endif

board/w7o/errors.h

@@ -1,81 +0,0 @@
-/*
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, william.hunter@mediaone.net
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _ERRORS_H_
-#define _ERRORS_H_
-
-#define ERR_FF		-1	/* led test value(2) */
-#define ERR_00		0x0000	/* led test value(2) */
-#define ERR_LED		0x01	/* led test failed (1)(3)(4) */
-#define ERR_RAMG	0x04	/* start SDRAM data bus test (2) */
-#define ERR_RAML	0x05	/* SDRAM data bus fault in LSW chip (5) */
-#define ERR_RAMH	0x06	/* SDRAM data bus fault in MSW chip (6) */
-#define ERR_RAMB	0x07	/* SDRAM data bus fault both chips (5)(6)(7) */
-#define ERR_ADDG	0x08	/* start Address ghosting test (13) */
-#define ERR_ADDF	0x09	/* fault during Address ghosting test (13) */
-#define ERR_POST1	0x0a	/* post1 tests complete */
-#define ERR_TMP1	0x0b	/* */
-#define ERR_R55G	0x0c	/* start SDRAM fill 55 test (2) */
-#define ERR_R55L	0x0d	/* SDRAM fill test 55 failed in LSW chip (8) */
-#define ERR_R55H	0x0e	/* SDRAM fill test 55 failed in MSW chip (9) */
-#define ERR_R55B	0x0f	/* SDRAM fill test 55 fail in both chips (10) */
-#define ERR_RAAG	0x10	/* start SDRAM fill aa test (2) */
-#define ERR_RAAL	0x11	/* SDRAM fill test aa failed in LSW chip (8) */
-#define ERR_RAAH	0x12	/* SDRAM fill test aa failed in MSW chip (9) */
-#define ERR_RAAB	0x13	/* SDRAM fill test aa fail in both chips (10) */
-#define ERR_R00G	0x14	/* start SDRAM fill 00 test (2) */
-#define ERR_R00L	0x15	/* SDRAM fill test 00 failed in LSW chip (8) */
-#define ERR_R00H	0x16	/* SDRAM fill test 00 failed in MSW chip (9) */
-#define ERR_R00B	0x17	/* SDRAM fill test 00 fail in both chips (10) */
-#define ERR_RTCG	0x18	/* start RTC test */
-#define ERR_RTCBAT	0x19	/* RTC battery failure */
-#define ERR_RTCTIM	0x1A	/* RTC invalid time/date values */
-#define ERR_RTCVAL	0x1B	/* RTC NVRAM not accessable */
-#define ERR_FPGAG	0x20	/* fault during FPGA programming */
-#define ERR_XRW1	0x21	/* Xilinx - can't read/write regs on FPGA 1 */
-#define ERR_XRW2	0x22	/* Xilinx - can't read/write regs on FPGA 2 */
-#define ERR_XRW3	0x23	/* Xilinx - can't read/write regs on FPGA 3 */
-#define ERR_XRW4	0x24	/* Xilinx - can't read/write regs on FPGA 4 */
-#define ERR_XRW5	0x25	/* Xilinx - can't read/write regs on FPGA 5 */
-#define ERR_XRW6	0x26	/* Xilinx - can't read/write regs on FPGA 6 */
-#define ERR_XINIT0	0x27	/* Xilinx - INIT line failed to go low */
-#define ERR_XINIT1	0x28	/* Xilinx - INIT line failed to go high */
-#define ERR_XDONE1	0x29	/* Xilinx - DONE line failed to go high */
-#define ERR_XIMAGE	0x2A	/* Xilinx - Bad FPGA image in Flash */
-#define ERR_TempG	0x2b	/* start temp sensor tests */
-#define ERR_Tinit0	0x2C	/* temp sensor 0 failed to init */
-#define ERR_Tinit1	0x2D	/* temp sensor 1 failed to init */
-#define ERR_Ttest0	0x2E	/* temp sensor 0 failed test */
-#define ERR_Ttest1	0x2F	/* temp sensor 1 failed test */
-#define ERR_lm75r	0x30	/* temp sensor read failure */
-#define ERR_lm75w	0x31	/* temp sensor write failure */
-
-
-#define ERR_POSTOK	0x55	/* PANIC: psych... OK */
-
-#if !defined(__ASSEMBLY__)
-extern void log_stat(int errcode);
-extern void log_warn(int errcode);
-extern void log_err(int errcode);
-#endif
-
-/*
-Debugging suggestions:
-(1) periferal data bus shorted or crossed
-(2) general processor halt, check reset, watch dog, power supply ripple, processor clock.
-(3) check p_we, p_r/w, p_oe, p_rdy lines.
-(4) check LED buffers
-(5) check SDRAM data bus bits 16-31, check LSW SDRAM chip.
-(6) check SDRAM data bus bits 0-15, check MSW SDRAM chip.
-(7) check SDRAM control lines and clocks
-(8) check decoupling caps, replace LSW SDRAM
-(9) check decoupling caps, replace MSW SDRAM
-(10)
-(11)
-(12)
-(13) SDRAM address shorted or unconnected, check sdram caps
-*/
-#endif /* _ERRORS_H_ */

board/w7o/flash.c

@@ -1,927 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- *  Based on code by:
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-#include <watchdog.h>
-
-/* info for FLASH chips    */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*
- * Functions
- */
-static ulong flash_get_size(vu_long *addr, flash_info_t *info);
-static int write_word8(flash_info_t *info, ulong dest, ulong data);
-static int write_word32(flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-
-unsigned long flash_init(void)
-{
-	int i;
-	unsigned long size_b0, base_b0;
-	unsigned long size_b1;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	/* Get Size of Boot and Main Flashes */
-	size_b0 = flash_get_size((vu_long *) FLASH_BASE0_PRELIM,
-			       &flash_info[0]);
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0 << 20);
-		return 0;
-	}
-	size_b1 =
-		flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
-			       &flash_info[1]);
-	if (flash_info[1].flash_id == FLASH_UNKNOWN) {
-		printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
-			size_b1, size_b1 << 20);
-		return 0;
-	}
-
-	/* Calculate base addresses */
-	base_b0 = -size_b0;
-
-	/* Setup offsets for Boot Flash */
-	flash_get_offsets(base_b0, &flash_info[0]);
-
-	/* Protect board level data */
-	(void) flash_protect(FLAG_PROTECT_SET,
-			     base_b0,
-			     flash_info[0].start[1] - 1, &flash_info[0]);
-
-	/* Monitor protection ON by default */
-	(void) flash_protect(FLAG_PROTECT_SET,
-			     base_b0 + size_b0 - monitor_flash_len,
-			     base_b0 + size_b0 - 1, &flash_info[0]);
-
-	/* Protect the FPGA image */
-	(void) flash_protect(FLAG_PROTECT_SET,
-			     FLASH_BASE1_PRELIM,
-			     FLASH_BASE1_PRELIM + CONFIG_SYS_FPGA_IMAGE_LEN -
-			     1, &flash_info[1]);
-
-	/* Protect the default boot image */
-	(void) flash_protect(FLAG_PROTECT_SET,
-			     FLASH_BASE1_PRELIM + CONFIG_SYS_FPGA_IMAGE_LEN,
-			     FLASH_BASE1_PRELIM + CONFIG_SYS_FPGA_IMAGE_LEN +
-			     0x600000 - 1, &flash_info[1]);
-
-	/* Setup offsets for Main Flash */
-	flash_get_offsets(FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	return size_b0 + size_b1;
-}
-
-static void flash_get_offsets(ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table - FOR BOOT ROM ONLY!!! */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	}
-}				/* end flash_get_offsets() */
-
-void flash_print_info(flash_info_t *info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("1 x AMD ");
-		break;
-	case FLASH_MAN_STM:
-		printf("1 x STM ");
-		break;
-	case FLASH_MAN_INTEL:
-		printf("2 x Intel ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-			printf("AM29LV040 (4096 Kbit, uniform sector size)\n");
-		else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM)
-			printf("M29W040B (4096 Kbit, uniform block size)\n");
-		else
-			printf("UNKNOWN 29x040x (4096 Kbit, uniform sector size)\n");
-		break;
-	case FLASH_28F320J3A:
-		printf("28F320J3A (32 Mbit = 128K x 32)\n");
-		break;
-	case FLASH_28F640J3A:
-		printf("28F640J3A (64 Mbit = 128K x 64)\n");
-		break;
-	case FLASH_28F128J3A:
-		printf("28F128J3A (128 Mbit = 128K x 128)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) {
-		printf("  Size: %ld KB in %d Blocks\n",
-		       info->size >> 10, info->sector_count);
-	} else {
-		printf("  Size: %ld KB in %d Sectors\n",
-		       info->size >> 10, info->sector_count);
-	}
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *) info->start[i];
-		size = size >> 2;	/* divide by 4 for longword access */
-		for (k = 0; k < size; k++) {
-			if (*flash++ != 0xffffffff) {
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s%s",
-		       info->start[i],
-		       erased ? " E" : "  ",
-		       info->protect[i] ? "RO " : "   ");
-	}
-	printf("\n");
-}				/* end flash_print_info() */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size(vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong base = (ulong) addr;
-
-	/* Setup default type */
-	info->flash_id = FLASH_UNKNOWN;
-	info->sector_count = 0;
-	info->size = 0;
-
-	/* Test for Boot Flash */
-	if (base == FLASH_BASE0_PRELIM) {
-		unsigned char value;
-		volatile unsigned char *addr2 = (unsigned char *) addr;
-
-		/* Write auto select command: read Manufacturer ID */
-		*(addr2 + 0x555) = 0xaa;
-		*(addr2 + 0x2aa) = 0x55;
-		*(addr2 + 0x555) = 0x90;
-
-		/* Manufacture ID */
-		value = *addr2;
-		switch (value) {
-		case (unsigned char) AMD_MANUFACT:
-			info->flash_id = FLASH_MAN_AMD;
-			break;
-		case (unsigned char) STM_MANUFACT:
-			info->flash_id = FLASH_MAN_STM;
-			break;
-		default:
-			*addr2 = 0xf0;	/* no or unknown flash  */
-			return 0;
-		}
-
-		/* Device ID */
-		value = *(addr2 + 1);
-		switch (value) {
-		case (unsigned char) AMD_ID_LV040B:
-		case (unsigned char) STM_ID_29W040B:
-			info->flash_id += FLASH_AM040;
-			info->sector_count = 8;
-			info->size = 0x00080000;
-			break;	/* => 512Kb */
-		default:
-			*addr2 = 0xf0;	/* => no or unknown flash */
-			return 0;
-		}
-	} else {		/* MAIN Flash */
-		unsigned long value;
-		volatile unsigned long *addr2 = (unsigned long *) addr;
-
-		/* Write auto select command: read Manufacturer ID */
-		*addr2 = 0x90909090;
-
-		/* Manufacture ID */
-		value = *addr2;
-		switch (value) {
-		case (unsigned long) INTEL_MANUFACT:
-			info->flash_id = FLASH_MAN_INTEL;
-			break;
-		default:
-			*addr2 = 0xff;	/* no or unknown flash  */
-			return 0;
-		}
-
-		/* Device ID - This shit is interleaved... */
-		value = *(addr2 + 1);
-		switch (value) {
-		case (unsigned long) INTEL_ID_28F320J3A:
-			info->flash_id += FLASH_28F320J3A;
-			info->sector_count = 32;
-			info->size = 0x00400000 * 2;
-			break;	/* => 2 X 4 MB */
-		case (unsigned long) INTEL_ID_28F640J3A:
-			info->flash_id += FLASH_28F640J3A;
-			info->sector_count = 64;
-			info->size = 0x00800000 * 2;
-			break;	/* => 2 X 8 MB */
-		case (unsigned long) INTEL_ID_28F128J3A:
-			info->flash_id += FLASH_28F128J3A;
-			info->sector_count = 128;
-			info->size = 0x01000000 * 2;
-			break;	/* => 2 X 16 MB */
-		default:
-			*addr2 = 0xff;	/* => no or unknown flash */
-		}
-	}
-
-	/* Make sure we don't exceed CONFIG_SYS_MAX_FLASH_SECT */
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf("** ERROR: sector count %d > max (%d) **\n",
-		       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	/* set up sector start address table */
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-		break;
-	case FLASH_28F320J3A:
-	case FLASH_28F640J3A:
-	case FLASH_28F128J3A:
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base +
-					(i * 0x00020000 * 2);	/* 2 Banks */
-		break;
-	}
-
-	/* Test for Boot Flash */
-	if (base == FLASH_BASE0_PRELIM) {
-		volatile unsigned char *addr2;
-
-		/* check for protected sectors */
-		for (i = 0; i < info->sector_count; i++) {
-			/*
-			 * read sector protection at sector address,
-			 * (AX .. A0) = 0x02
-			 * D0 = 1 if protected
-			 */
-			addr2 = (volatile unsigned char *) (info->start[i]);
-			info->protect[i] = *(addr2 + 2) & 1;
-		}
-
-		/* Restore read mode */
-		*(unsigned char *) base = 0xF0;	/* Reset NORMAL Flash */
-	} else {		/* Main Flash */
-		volatile unsigned long *addr2;
-
-		/* check for protected sectors */
-		for (i = 0; i < info->sector_count; i++) {
-			/*
-			 * read sector protection at sector address,
-			 * (AX .. A0) = 0x02
-			 * D0 = 1 if protected
-			 */
-			addr2 = (volatile unsigned long *) (info->start[i]);
-			info->protect[i] = *(addr2 + 2) & 0x1;
-		}
-
-		/* Restore read mode */
-		*(unsigned long *) base = 0xFFFFFFFF;	/* Reset  Flash */
-	}
-
-	return info->size;
-}				/* end flash_get_size() */
-
-static int wait_for_DQ7(ulong addr, uchar cmp_val, ulong tout)
-{
-	int i;
-
-	volatile uchar *vaddr = (uchar *) addr;
-
-	/* Loop X times */
-	for (i = 1; i <= (100 * tout); i++) {	/* Wait up to tout ms */
-		udelay(10);
-		/* Pause 10 us */
-
-		/* Check for completion */
-		if ((vaddr[0] & 0x80) == (cmp_val & 0x80))
-			return 0;
-
-		/* KEEP THE LUSER HAPPY - Print a dot every 1.1 seconds */
-		if (!(i % 110000))
-			putc('.');
-
-		/* Kick the dog if needed */
-		WATCHDOG_RESET();
-	}
-
-	return 1;
-}				/* wait_for_DQ7() */
-
-static int flash_erase8(flash_info_t *info, int s_first, int s_last)
-{
-	int tcode, rcode = 0;
-	volatile uchar *addr = (uchar *) (info->start[0]);
-	volatile uchar *sector_addr;
-	int flag, prot, sect;
-
-	/* Validate arguments */
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-		return 1;
-	}
-
-	/* Check for KNOWN flash type */
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	/* Check for protected sectors */
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf("\n");
-	}
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			sector_addr = (uchar *) (info->start[sect]);
-
-			if ((info->flash_id & FLASH_VENDMASK) ==
-			    FLASH_MAN_STM)
-				printf("Erasing block %p\n", sector_addr);
-			else
-				printf("Erasing sector %p\n", sector_addr);
-
-			/* Disable interrupts which might cause timeout */
-			flag = disable_interrupts();
-
-			*(addr + 0x555) = (uchar) 0xAA;
-			*(addr + 0x2aa) = (uchar) 0x55;
-			*(addr + 0x555) = (uchar) 0x80;
-			*(addr + 0x555) = (uchar) 0xAA;
-			*(addr + 0x2aa) = (uchar) 0x55;
-			*sector_addr = (uchar) 0x30;	/* sector erase */
-
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 * Takes up to 6 seconds.
-			 */
-			tcode = wait_for_DQ7((ulong) sector_addr, 0x80, 6000);
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			/* Make sure we didn't timeout */
-			if (tcode) {
-				printf("Timeout\n");
-				rcode = 1;
-			}
-		}
-	}
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/* reset to read mode */
-	addr = (uchar *) info->start[0];
-	*addr = (uchar) 0xF0;	/* reset bank */
-
-	printf(" done\n");
-	return rcode;
-}				/* end flash_erase8() */
-
-static int flash_erase32(flash_info_t *info, int s_first, int s_last)
-{
-	int flag, sect;
-	ulong start, now, last;
-	int prot = 0;
-
-	/* Validate arguments */
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-		return 1;
-	}
-
-	/* Check for KNOWN flash type */
-	if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
-		printf("Can erase only Intel flash types - aborted\n");
-		return 1;
-	}
-
-	/* Check for protected sectors */
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf("\n");
-	}
-
-	start = get_timer(0);
-	last = start;
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		WATCHDOG_RESET();
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_long *addr = (vu_long *) (info->start[sect]);
-			unsigned long status;
-
-			/* Disable interrupts which might cause a timeout */
-			flag = disable_interrupts();
-
-			*addr = 0x00500050;	/* clear status register */
-			*addr = 0x00200020;	/* erase setup */
-			*addr = 0x00D000D0;	/* erase confirm */
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			/* Wait at least 80us - let's wait 1 ms */
-			udelay(1000);
-
-			while (((status = *addr) & 0x00800080) != 0x00800080) {
-				now = get_timer(start);
-				if (now > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf("Timeout\n");
-					/* suspend erase      */
-					*addr = 0x00B000B0;
-					/* reset to read mode */
-					*addr = 0x00FF00FF;
-					return 1;
-				}
-
-				/*
-				 * show that we're waiting
-				 * every second (?)
-				 */
-				if ((now - last) > 990) {
-					putc('.');
-					last = now;
-				}
-			}
-			*addr = 0x00FF00FF;	/* reset to read mode */
-		}
-	}
-	printf(" done\n");
-	return 0;
-}
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040)
-		return flash_erase8(info, s_first, s_last);
-	else
-		return flash_erase32(info, s_first, s_last);
-}
-
-/*
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_buff8(flash_info_t *info, uchar *src, ulong addr,
-		       ulong cnt)
-{
-	ulong cp, wp, data;
-	ulong start;
-	int i, l, rc;
-
-	start = get_timer(0);
-
-	wp = (addr & ~3);	/* get lower word
-				   aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	l = addr - wp;
-	if (l != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-
-		for (; cnt == 0 && i < 4; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		rc = write_word8(info, wp, data);
-		if (rc != 0)
-			return rc;
-
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i)
-			data = (data << 8) | *src++;
-
-		rc = write_word8(info, wp, data);
-		if (rc != 0)
-			return rc;
-
-		wp += 4;
-		cnt -= 4;
-		if (get_timer(start) > 1000) {	/* every second */
-			WATCHDOG_RESET();
-			putc('.');
-			start = get_timer(0);
-		}
-	}
-
-	if (cnt == 0)
-		return 0;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-
-	for (; i < 4; ++i, ++cp)
-		data = (data << 8) | (*(uchar *) cp);
-
-	return write_word8(info, wp, data);
-}
-
-#define	FLASH_WIDTH	4	/* flash bus width in bytes */
-static int write_buff32(flash_info_t *info, uchar *src, ulong addr,
-			ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-	ulong start;
-
-	start = get_timer(0);
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	/* get lower FLASH_WIDTH aligned address */
-	wp = (addr & ~(FLASH_WIDTH - 1));
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		for (; i < FLASH_WIDTH && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-
-		for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		rc = write_word32(info, wp, data);
-		if (rc != 0)
-			return rc;
-
-		wp += FLASH_WIDTH;
-	}
-
-	/*
-	 * handle FLASH_WIDTH aligned part
-	 */
-	while (cnt >= FLASH_WIDTH) {
-		data = 0;
-		for (i = 0; i < FLASH_WIDTH; ++i)
-			data = (data << 8) | *src++;
-
-		rc = write_word32(info, wp, data);
-		if (rc != 0)
-			return rc;
-
-		wp += FLASH_WIDTH;
-		cnt -= FLASH_WIDTH;
-		if (get_timer(start) > 990) {	/* every second */
-			putc('.');
-			start = get_timer(0);
-		}
-	}
-
-	if (cnt == 0)
-		return 0;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-
-	for (; i < FLASH_WIDTH; ++i, ++cp)
-		data = (data << 8) | (*(uchar *) cp);
-
-	return write_word32(info, wp, data);
-}
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	int retval;
-
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040)
-		retval = write_buff8(info, src, addr, cnt);
-	else
-		retval = write_buff32(info, src, addr, cnt);
-
-	return retval;
-}
-
-/*
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-static int write_word8(flash_info_t *info, ulong dest, ulong data)
-{
-	volatile uchar *addr2 = (uchar *) (info->start[0]);
-	volatile uchar *dest2 = (uchar *) dest;
-	volatile uchar *data2 = (uchar *) &data;
-	int flag;
-	int i, tcode, rcode = 0;
-
-	/* Check if Flash is (sufficently) erased */
-	if ((*((volatile uchar *)dest) & (uchar)data) != (uchar)data)
-		return 2;
-
-	for (i = 0; i < (4 / sizeof(uchar)); i++) {
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		*(addr2 + 0x555) = (uchar) 0xAA;
-		*(addr2 + 0x2aa) = (uchar) 0x55;
-		*(addr2 + 0x555) = (uchar) 0xA0;
-
-		dest2[i] = data2[i];
-
-		/* Wait for write to complete, up to 1ms */
-		tcode = wait_for_DQ7((ulong) &dest2[i], data2[i], 1);
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* Make sure we didn't timeout */
-		if (tcode)
-			rcode = 1;
-	}
-
-	return rcode;
-}
-
-static int write_word32(flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *) dest;
-	ulong status;
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data)
-		return 2;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	*addr = 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer(0);
-
-	while (((status = *addr) & 0x00800080) != 0x00800080) {
-		WATCHDOG_RESET();
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = 0x00FF00FF;	/* restore read mode */
-			return 1;
-		}
-	}
-
-	*addr = 0x00FF00FF;	/* restore read mode */
-
-	return 0;
-}
-
-static int _flash_protect(flash_info_t *info, long sector)
-{
-	int i;
-	int flag;
-	ulong status;
-	int rcode = 0;
-	volatile long *addr = (long *)sector;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F320J3A:
-	case FLASH_28F640J3A:
-	case FLASH_28F128J3A:
-		/* Disable interrupts which might cause Flash to timeout */
-		flag = disable_interrupts();
-
-		/* Issue command */
-		*addr = 0x00500050L;	/* Clear the status register */
-		*addr = 0x00600060L;	/* Set lock bit setup */
-		*addr = 0x00010001L;	/* Set lock bit confirm */
-
-		/* Wait for command completion */
-		for (i = 0; i < 10; i++) {	/* 75us timeout, wait 100us */
-			udelay(10);
-			if ((*addr & 0x00800080L) == 0x00800080L)
-				break;
-		}
-
-		/* Not successful? */
-		status = *addr;
-		if (status != 0x00800080L) {
-			printf("Protect %x sector failed: %x\n",
-			       (uint) sector, (uint) status);
-			rcode = 1;
-		}
-
-		/* Restore read mode */
-		*addr = 0x00ff00ffL;
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		break;
-	case FLASH_AM040:	/* No soft sector protection */
-		break;
-	}
-
-	/* Turn protection on for this sector */
-	for (i = 0; i < info->sector_count; i++) {
-		if (info->start[i] == sector) {
-			info->protect[i] = 1;
-			break;
-		}
-	}
-
-	return rcode;
-}
-
-static int _flash_unprotect(flash_info_t *info, long sector)
-{
-	int i;
-	int flag;
-	ulong status;
-	int rcode = 0;
-	volatile long *addr = (long *) sector;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F320J3A:
-	case FLASH_28F640J3A:
-	case FLASH_28F128J3A:
-		/* Disable interrupts which might cause Flash to timeout */
-		flag = disable_interrupts();
-
-		*addr = 0x00500050L;	/* Clear the status register */
-		*addr = 0x00600060L;	/* Clear lock bit setup */
-		*addr = 0x00D000D0L;	/* Clear lock bit confirm */
-
-		/* Wait for command completion */
-		for (i = 0; i < 80; i++) {	/* 700ms timeout, wait 800 */
-			udelay(10000);	/* Delay 10ms */
-			if ((*addr & 0x00800080L) == 0x00800080L)
-				break;
-		}
-
-		/* Not successful? */
-		status = *addr;
-		if (status != 0x00800080L) {
-			printf("Un-protect %x sector failed: %x\n",
-			       (uint) sector, (uint) status);
-			*addr = 0x00ff00ffL;
-			rcode = 1;
-		}
-
-		/* restore read mode */
-		*addr = 0x00ff00ffL;
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		break;
-	case FLASH_AM040:	/* No soft sector protection */
-		break;
-	}
-
-	/*
-	 * Fix Intel's little red wagon.  Reprotect
-	 * sectors that were protected before we undid
-	 * protection on a specific sector.
-	 */
-	for (i = 0; i < info->sector_count; i++) {
-		if (info->start[i] != sector) {
-			if (info->protect[i]) {
-				if (_flash_protect(info, info->start[i]))
-					rcode = 1;
-			}
-		} else		/* Turn protection off for this sector */
-			info->protect[i] = 0;
-	}
-
-	return rcode;
-}
-
-int flash_real_protect(flash_info_t *info, long sector, int prot)
-{
-	int rcode;
-
-	if (prot)
-		rcode = _flash_protect(info, info->start[sector]);
-	else
-		rcode = _flash_unprotect(info, info->start[sector]);
-
-	return rcode;
-}

board/w7o/fpga.c

@@ -1,371 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *  and
- * Bill Hunter, Wave 7 Optics, william.hunter@mediaone.net
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <config.h>
-#include <common.h>
-#include "w7o.h"
-#include <asm/processor.h>
-#include <linux/compiler.h>
-#include "errors.h"
-
-static void
-fpga_img_write(unsigned long *src, unsigned long len, unsigned short *daddr)
-{
-	unsigned long i;
-	volatile unsigned long val;
-	volatile unsigned short *dest = daddr;	/* volatile-bypass optimizer */
-
-	for (i = 0; i < len; i++, src++) {
-		val = *src;
-		*dest = (unsigned short) ((val & 0xff000000L) >> 16);
-		*dest = (unsigned short) ((val & 0x00ff0000L) >> 8);
-		*dest = (unsigned short) (val & 0x0000ff00L);
-		*dest = (unsigned short) ((val & 0x000000ffL) << 8);
-	}
-
-	/* Terminate programming with 4 C clocks */
-	dest = daddr;
-	val = *(unsigned short *) dest;
-	val = *(unsigned short *) dest;
-	val = *(unsigned short *) dest;
-	val = *(unsigned short *) dest;
-
-}
-
-
-int
-fpgaDownload(unsigned char *saddr, unsigned long size, unsigned short *daddr)
-{
-	int i;			/* index, intr disable flag */
-	int start;		/* timer */
-	unsigned long greg, grego;	/* GPIO & output register */
-	unsigned long length;	/* image size in words */
-	unsigned long *source;	/* image source addr */
-	unsigned short *dest;	/* destination FPGA addr */
-	volatile unsigned short *ndest;	/* temp dest FPGA addr */
-	unsigned long cnfg = GPIO_XCV_CNFG;	/* FPGA CNFG */
-	unsigned long eirq = GPIO_XCV_IRQ;
-	int retval = -1;	/* Function return value */
-	__maybe_unused volatile unsigned short val;	/* temp val */
-
-	/* Setup some basic values */
-	length = (size / 4) + 1;	/* size in words, rounding UP
-					   is OK */
-	source = (unsigned long *) saddr;
-	dest = (unsigned short *) daddr;
-
-	/* Get DCR output register */
-	grego = in32(PPC405GP_GPIO0_OR);
-
-	/* Reset FPGA */
-	grego &= ~GPIO_XCV_PROG;	/* PROG line low */
-	out32(PPC405GP_GPIO0_OR, grego);
-
-	/* Setup timeout timer */
-	start = get_timer(0);
-
-	/* Wait for FPGA init line to go low */
-	while (in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) {
-		/* Check for timeout - 100us max, so use 3ms */
-		if (get_timer(start) > 3) {
-			printf("     failed to start init.\n");
-			log_warn(ERR_XINIT0);	/* Don't halt */
-
-			/* Reset line stays low */
-			goto done;	/* I like gotos... */
-		}
-	}
-
-	/* Unreset FPGA */
-	grego |= GPIO_XCV_PROG;	/* PROG line high */
-	out32(PPC405GP_GPIO0_OR, grego);
-
-	/* Wait for FPGA end of init period = init line go hi  */
-	while (!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) {
-
-		/* Check for timeout */
-		if (get_timer(start) > 3) {
-			printf("     failed to exit init.\n");
-			log_warn(ERR_XINIT1);
-
-			/* Reset FPGA */
-			grego &= ~GPIO_XCV_PROG;	/* PROG line low */
-			out32(PPC405GP_GPIO0_OR, grego);
-
-			goto done;
-		}
-	}
-
-	/* Now program FPGA ... */
-	ndest = dest;
-	for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
-		/* Toggle IRQ/GPIO */
-		greg = mfdcr(CPC0_CR0);	/* get chip ctrl register */
-		greg |= eirq;	/* toggle irq/gpio */
-		mtdcr(CPC0_CR0, greg);	/*  ... just do it */
-
-		/* turn on open drain for CNFG */
-		greg = in32(PPC405GP_GPIO0_ODR); /* get open drain register */
-		greg |= cnfg;	/* CNFG open drain */
-		out32(PPC405GP_GPIO0_ODR, greg); /*  .. just do it */
-
-		/* Turn output enable on for CNFG */
-		greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
-		greg |= cnfg;	/* CNFG tristate inactive */
-		out32(PPC405GP_GPIO0_TCR, greg); /*  ... just do it */
-
-		/* Setup FPGA for programming */
-		grego &= ~cnfg;	/* CONFIG line low */
-		out32(PPC405GP_GPIO0_OR, grego);
-
-		/*
-		 * Program the FPGA
-		 */
-		printf("\n       destination: 0x%lx ", (unsigned long) ndest);
-
-		fpga_img_write(source, length, (unsigned short *) ndest);
-
-		/* Done programming */
-		grego |= cnfg;	/* CONFIG line high */
-		out32(PPC405GP_GPIO0_OR, grego);
-
-		/* Turn output enable OFF for CNFG */
-		greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
-		greg &= ~cnfg;	/* CNFG tristate inactive */
-		out32(PPC405GP_GPIO0_TCR, greg); /*  ... just do it */
-
-		/* Toggle IRQ/GPIO */
-		greg = mfdcr(CPC0_CR0);	/* get chip ctrl register */
-		greg &= ~eirq;	/* toggle irq/gpio */
-		mtdcr(CPC0_CR0, greg);	/*  ... just do it */
-
-		/* XXX - Next FPGA addr */
-		ndest = (unsigned short *) ((char *) ndest + 0x00100000L);
-		cnfg >>= 1;	/* XXX - Next  */
-		eirq >>= 1;
-	}
-
-	/* Terminate programming with 4 C clocks */
-	ndest = dest;
-	for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
-		val = *ndest;
-		val = *ndest;
-		val = *ndest;
-		val = *ndest;
-		ndest = (unsigned short *) ((char *) ndest + 0x00100000L);
-	}
-
-	/* Setup timer */
-	start = get_timer(0);
-
-	/* Wait for FPGA end of programming period = Test DONE low  */
-	while (!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) {
-
-		/* Check for timeout */
-		if (get_timer(start) > 3) {
-			printf("     done failed to come high.\n");
-			log_warn(ERR_XDONE1);
-
-			/* Reset FPGA */
-			grego &= ~GPIO_XCV_PROG;	/* PROG line low */
-			out32(PPC405GP_GPIO0_OR, grego);
-
-			goto done;
-		}
-	}
-
-	printf("\n       FPGA load succeeded\n");
-	retval = 0;		/* Program OK */
-
-done:
-	return retval;
-}
-
-/* FPGA image is stored in flash */
-extern flash_info_t flash_info[];
-
-int init_fpga(void)
-{
-	unsigned int i, j, ptr;	/* General purpose */
-	unsigned char bufchar;	/* General purpose character */
-	unsigned char *buf;	/* Start of image pointer */
-	unsigned long len;	/* Length of image */
-	unsigned char *fn_buf;	/* Start of filename string */
-	unsigned int fn_len;	/* Length of filename string */
-	unsigned char *xcv_buf;	/* Pointer to start of image */
-	unsigned long xcv_len;	/* Length of image */
-	unsigned long crc;	/* 30bit crc in image */
-	unsigned long calc_crc;	/* Calc'd 30bit crc */
-	int retval = -1;
-
-	/* Tell the world what we are doing */
-	printf("FPGA:  ");
-
-	/*
-	 * Get address of first sector where the FPGA
-	 * image is stored.
-	 */
-	buf = (unsigned char *) flash_info[1].start[0];
-
-	/*
-	 * Get the stored image's CRC & length.
-	 */
-	crc = *(unsigned long *) (buf + 4);	/* CRC is first long word */
-	len = *(unsigned long *) (buf + 8);	/* Image len is next long */
-
-	/* Pedantic */
-	if ((len < 0x133A4) || (len > 0x80000))
-		goto bad_image;
-
-	/*
-	 * Get the file name pointer and length.
-	 * filename length is next short
-	 */
-	fn_len = (*(unsigned short *) (buf + 12) & 0xff);
-	fn_buf = buf + 14;
-
-	/*
-	 * Get the FPGA image pointer and length length.
-	 */
-	xcv_buf = fn_buf + fn_len;	/* pointer to fpga image */
-	xcv_len = len - 14 - fn_len;	/* fpga image length */
-
-	/* Check for uninitialized FLASH */
-	if ((strncmp((char *) buf, "w7o", 3) != 0) || (len > 0x0007ffffL)
-	    || (len == 0))
-		goto bad_image;
-
-	/*
-	 * Calculate and Check the image's CRC.
-	 */
-	calc_crc = crc32(0, xcv_buf, xcv_len);
-	if (crc != calc_crc) {
-		printf("\nfailed - bad CRC\n");
-		goto done;
-	}
-
-	/* Output the file name */
-	printf("file name  : ");
-	for (i = 0; i < fn_len; i++) {
-		bufchar = fn_buf[+i];
-		if (bufchar < ' ' || bufchar > '~')
-			bufchar = '.';
-		putc(bufchar);
-	}
-
-	/*
-	 * find rest of display data
-	 */
-	ptr = 15;		/* Offset to ncd filename
-				   length in fpga image */
-	j = xcv_buf[ptr];	/* Get len of ncd filename */
-	if (j > 32)
-		goto bad_image;
-	ptr = ptr + j + 3;	/* skip ncd filename string +
-				   3 bytes more bytes */
-
-	/*
-	 * output target device string
-	 */
-	j = xcv_buf[ptr++] - 1;	/* len of targ str less term */
-	if (j > 32)
-		goto bad_image;
-	printf("\n       target     : ");
-	for (i = 0; i < j; i++) {
-		bufchar = (xcv_buf[ptr++]);
-		if (bufchar < ' ' || bufchar > '~')
-			bufchar = '.';
-		putc(bufchar);
-	}
-
-	/*
-	 * output compilation date string and time string
-	 */
-	ptr += 3;		/* skip 2 bytes */
-	printf("\n       synth time : ");
-	j = (xcv_buf[ptr++] - 1);	/* len of date str less term */
-	if (j > 32)
-		goto bad_image;
-	for (i = 0; i < j; i++) {
-		bufchar = (xcv_buf[ptr++]);
-		if (bufchar < ' ' || bufchar > '~')
-			bufchar = '.';
-		putc(bufchar);
-	}
-
-	ptr += 3;		/* Skip 2 bytes */
-	printf(" - ");
-	j = (xcv_buf[ptr++] - 1);	/* slen = targ dev str len */
-	if (j > 32)
-		goto bad_image;
-	for (i = 0; i < j; i++) {
-		bufchar = (xcv_buf[ptr++]);
-		if (bufchar < ' ' || bufchar > '~')
-			bufchar = '.';
-		putc(bufchar);
-	}
-
-	/*
-	 * output crc and length strings
-	 */
-	printf("\n       len & crc  : 0x%lx  0x%lx", len, crc);
-
-	/*
-	 * Program the FPGA.
-	 */
-	retval = fpgaDownload((unsigned char *) xcv_buf, xcv_len,
-			      (unsigned short *) 0xfd000000L);
-	return retval;
-
-bad_image:
-	printf("\n       BAD FPGA image format @ %lx\n",
-	       flash_info[1].start[0]);
-	log_warn(ERR_XIMAGE);
-done:
-	return retval;
-}
-
-void test_fpga(unsigned short *daddr)
-{
-	int i;
-	volatile unsigned short *ndest = daddr;
-
-	for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
-#if defined(CONFIG_W7OLMG)
-		ndest[0x7e] = 0x55aa;
-		if (ndest[0x7e] != 0x55aa)
-			log_warn(ERR_XRW1 + i);
-		ndest[0x7e] = 0xaa55;
-		if (ndest[0x7e] != 0xaa55)
-			log_warn(ERR_XRW1 + i);
-		ndest[0x7e] = 0xc318;
-		if (ndest[0x7e] != 0xc318)
-			log_warn(ERR_XRW1 + i);
-
-#elif defined(CONFIG_W7OLMC)
-		ndest[0x800] = 0x55aa;
-		ndest[0x801] = 0xaa55;
-		ndest[0x802] = 0xc318;
-		ndest[0x4800] = 0x55aa;
-		ndest[0x4801] = 0xaa55;
-		ndest[0x4802] = 0xc318;
-		if ((ndest[0x800] != 0x55aa) ||
-		    (ndest[0x801] != 0xaa55) || (ndest[0x802] != 0xc318))
-			log_warn(ERR_XRW1 + (2 * i)); /* Auto gen error code */
-		if ((ndest[0x4800] != 0x55aa) ||
-		    (ndest[0x4801] != 0xaa55) || (ndest[0x4802] != 0xc318))
-			log_warn(ERR_XRW2 + (2 * i)); /* Auto gen error code */
-
-#else
-#error "Unknown W7O board configuration"
-#endif
-	}
-
-	printf("       FPGA ready\n");
-	return;
-}

board/w7o/fsboot.c

@@ -1,73 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wave 7 Optics, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <elf.h>
-
-/*
- * FIXME: Add code to test image and it's header.
- */
-static int
-image_check(ulong addr)
-{
-    return valid_elf_image(addr);
-}
-
-void
-init_fsboot(void)
-{
-    char  *envp;
-    ulong loadaddr;
-    ulong testaddr;
-    ulong alt_loadaddr;
-    char buf[9];
-
-    /*
-     * Get test image address
-     */
-    if ((envp = getenv("testaddr")) != NULL)
-	testaddr = simple_strtoul(envp, NULL, 16);
-    else
-	testaddr = -1;
-
-    /*
-     * Are we going to test boot and image?
-     */
-    if ((testaddr != -1) && image_check(testaddr)) {
-
-	/* Set alt_loadaddr */
-	alt_loadaddr = testaddr;
-	sprintf(buf, "%lX", alt_loadaddr);
-	setenv("alt_loadaddr", buf);
-
-	/* Clear test_addr */
-	setenv("testaddr", NULL);
-
-	/*
-	 * Save current environment with alt_loadaddr,
-	 * and cleared testaddr.
-	 */
-	saveenv();
-
-	/*
-	 * Setup temporary loadaddr to alt_loadaddr
-	 * XXX - DO NOT SAVE ENVIRONMENT!
-	 */
-	loadaddr = alt_loadaddr;
-	sprintf(buf, "%lX", loadaddr);
-	setenv("loadaddr", buf);
-
-    } else { /* Normal boot */
-	setenv("alt_loadaddr", NULL);		/* Clear alt_loadaddr */
-	setenv("testaddr", NULL);		/* Clear testaddr */
-	saveenv();
-    }
-
-    return;
-}

board/w7o/init.S

@@ -1,244 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
- */
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/******************************************************************************
- * Function:	ext_bus_cntlr_init
- *
- * Description:	Configures EBC Controller and a few basic chip selects.
- *
- *		CS0 is setup to get the Boot Flash out of the addresss range
- *		so that we may setup a stack.  CS7 is setup so that we can
- *		access and reset the hardware watchdog.
- *
- *		IMPORTANT: For pass1 this code must run from
- *		cache since you can not reliably change a peripheral banks
- *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT
- *		execute the code that modifies bank 0 timings from ROM, so
- *		we run it from cache.
- *
- * Notes:	Does NOT use the stack.
- *****************************************************************************/
-	.section ".text"
-	.align	2
-	.globl	ext_bus_cntlr_init
-	.type	ext_bus_cntlr_init, @function
-ext_bus_cntlr_init:
-	mflr	r0
-	/********************************************************************
-	 * Prefetch entire ext_bus_cntrl_init function into the icache.
-	 * This is necessary because we are going to change the same CS we
-	 * are executing from.  Otherwise a CPU lockup may occur.
-	 *******************************************************************/
-	bl	..getAddr
-..getAddr:
-	mflr	r3			/* get address of ..getAddr */
-
-	/* Calculate number of cache lines for this function */
-	addi	r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
-	mtctr	r4
-..ebcloop:
-	icbt	r0, r3			/* prefetch cache line for addr in r3*/
-	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
-	bdnz	..ebcloop		/* continue for $CTR cache lines */
-
-	/********************************************************************
-	 * Delay to ensure all accesses to ROM are complete before changing
-	 * bank 0 timings. 200usec should be enough.
-	 * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
-	 *******************************************************************/
-	addis	r3, 0, 0x0
-	ori	r3, r3, 0xA000		/* wait 200us from reset */
-	mtctr	r3
-..spinlp:
-	bdnz	..spinlp		/* spin loop */
-
-	/********************************************************************
-	 * Setup External Bus Controller (EBC).
-	 *******************************************************************/
-	addi	r3, 0, EBC0_CFG
-	mtdcr	EBC0_CFGADDR, r3
-	addis	r4, 0, 0xb040		/* Device base timeout = 1024 cycles */
-	ori	r4, r4, 0x0		/* Drive CS with external master */
-	mtdcr	EBC0_CFGDATA, r4
-
-	/********************************************************************
-	 * Change PCIINT signal to PerWE
-	 *******************************************************************/
-	mfdcr	r4, CPC0_CR1
-	ori	r4, r4, 0x4000
-	mtdcr	CPC0_CR1, r4
-
-	/********************************************************************
-	 * Memory Bank 0 (Flash Bank 0) initialization
-	 *******************************************************************/
-	addi	r3, 0, PB1AP
-	mtdcr	EBC0_CFGADDR, r3
-	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB0AP@h
-	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB0AP@l
-	mtdcr	EBC0_CFGDATA, r4
-
-	addi	r3, 0, PB0CR
-	mtdcr	EBC0_CFGADDR, r3
-	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB0CR@h
-	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB0CR@l
-	mtdcr	EBC0_CFGDATA, r4
-
-	/********************************************************************
-	 * Memory Bank 7 LEDs - NEEDED BECAUSE OF HW WATCHDOG AND LEDs.
-	 *******************************************************************/
-	addi	r3, 0, PB7AP
-	mtdcr	EBC0_CFGADDR, r3
-	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB7AP@h
-	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB7AP@l
-	mtdcr	EBC0_CFGDATA, r4
-
-	addi	r3, 0, PB7CR
-	mtdcr	EBC0_CFGADDR, r3
-	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB7CR@h
-	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB7CR@l
-	mtdcr	EBC0_CFGDATA, r4
-
-	/* We are all done */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-.Lfe0:	.size	ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
-/* end ext_bus_cntlr_init() */
-
-/******************************************************************************
- * Function:	sdram_init
- *
- * Description:	Configures SDRAM memory banks.
- *
- *		Serial Presence Detect, "SPD," reads the SDRAM EEPROM
- *		via the IIC bus and then configures the SDRAM memory
- *		banks appropriately. If Auto Memory Configuration is
- *		is not used, it is assumed that a 4MB 11x8x2, non-ECC,
- *		SDRAM is soldered down.
- *
- * Notes:	Expects that the stack is already setup.
- *****************************************************************************/
-	.section ".text"
-	.align	2
-	.globl	sdram_init
-	.type	sdram_init, @function
-sdram_init:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -8(r1)		/* Save back chain and move SP */
-	stw	r0, +12(r1)		/* Save link register */
-
-	/*
-	 * First call spd_sdram to try to init SDRAM according to the
-	 * contents of the SPD EEPROM.  If the SPD EEPROM is blank or
-	 * erronious, spd_sdram returns 0 in R3.
-	 */
-	li	r3,0
-	bl	spd_sdram
-	addic.	r3, r3, 0		/* Check for error, save dram size */
-	bne	..sdri_done		/* If it worked, we're done... */
-
-	/********************************************************************
-	 * If SPD detection fails, we'll default to 4MB, 11x8x2, as this
-	 * is the SMALLEST SDRAM size the 405 supports.  We can do this
-	 * because W7O boards have soldered on RAM, and there will always
-	 * be some amount present.  If we were using DIMMs, we should hang
-	 * the board instead, since it doesn't have any RAM to continue
-	 * running with.
-	 *******************************************************************/
-
-	/*
-	 * Disable memory controller to allow
-	 * values to be changed.
-	 */
-	addi    r3, 0, SDRAM0_CFG
-	mtdcr   SDRAM0_CFGADDR, r3
-	addis   r4, 0, 0x0
-	ori     r4, r4, 0x0
-	mtdcr   SDRAM0_CFGDATA, r4
-
-	/*
-	 * Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2
-	 * All other banks are disabled.
-	 */
-	addi	r3, 0, SDRAM0_B0CR
-	mtdcr	SDRAM0_CFGADDR, r3
-	addis	r4, 0, 0x0000		/* BA=0x0, SZ=4MB */
-	ori	r4, r4, 0x8001		/* Mode is 5, 11x8x2or4, BE=Enabled */
-	mtdcr	SDRAM0_CFGDATA, r4
-
-	/* Clear MB1CR,MB2CR,MB3CR to turn other banks off */
-	addi	r4, 0, 0		/* Zero the data reg */
-
-	addi	r3, r3, 4		/* Point to MB1CF reg */
-	mtdcr	SDRAM0_CFGADDR, r3		/* Set the address */
-	mtdcr	SDRAM0_CFGDATA, r4		/* Zero the reg */
-
-	addi	r3, r3, 4		/* Point to MB2CF reg */
-	mtdcr	SDRAM0_CFGADDR, r3		/* Set the address */
-	mtdcr	SDRAM0_CFGDATA, r4		/* Zero the reg */
-
-	addi	r3, r3, 4		/* Point to MB3CF reg */
-	mtdcr	SDRAM0_CFGADDR, r3		/* Set the address */
-	mtdcr	SDRAM0_CFGDATA, r4		/* Zero the reg */
-
-	/********************************************************************
-	 * Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR.
-	 * To set the appropriate timings, we assume sdram is
-	 * 100MHz (pc100 compliant).
-	 *******************************************************************/
-
-	/*
-	 * Set up SDTR1
-	 */
-	addi    r3, 0, SDRAM0_TR
-	mtdcr   SDRAM0_CFGADDR, r3
-	addis   r4, 0, 0x0086		/* SDTR1 value for 100Mhz */
-	ori     r4, r4, 0x400D
-	mtdcr   SDRAM0_CFGDATA, r4
-
-	/*
-	 * Set RTR
-	 */
-	addi    r3, 0, SDRAM0_RTR
-	mtdcr   SDRAM0_CFGADDR, r3
-	addis   r4, 0, 0x05F0		/* RTR refresh val = 15.625ms@100Mhz */
-	mtdcr   SDRAM0_CFGDATA, r4
-
-	/********************************************************************
-	 * Delay to ensure 200usec have elapsed since reset. Assume worst
-	 * case that the core is running 200Mhz:
-	 *	  200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
-	 *******************************************************************/
-	addis   r3, 0, 0x0000
-	ori     r3, r3, 0xA000		/* Wait 200us from reset */
-	mtctr   r3
-..spinlp2:
-	bdnz    ..spinlp2		/* spin loop */
-
-	/********************************************************************
-	 * Set memory controller options reg, MCOPT1.
-	 *******************************************************************/
-	addi    r3, 0, SDRAM0_CFG
-	mtdcr   SDRAM0_CFGADDR, r3
-	addis   r4, 0, 0x80E0		/* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */
-	ori     r4, r4, 0x0000		/* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */
-	mtdcr   SDRAM0_CFGDATA, r4		/* EMDULR=1 */
-
-..sdri_done:
-	/* restore and return */
-	lwz	r0, +12(r1)		/* Get saved link register */
-	addi	r1, r1, +8		/* Remove frame from stack */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-.Lfe1:	.size	sdram_init,.Lfe1-sdram_init
-/* end sdram_init() */

board/w7o/post1.S

@@ -1,724 +0,0 @@
-/*
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, william.hunter@mediaone.net
- *  and
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/*
- * Description:
- *	Routine to exercise memory for the bringing up of our boards.
- */
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#include <watchdog.h>
-
-#include "errors.h"
-
-#define _ASMLANGUAGE
-
-	.globl	test_sdram
-	.globl	test_led
-	.globl	log_stat
-	.globl	log_warn
-	.globl	log_err
-	.globl  temp_uart_init
-	.globl  post_puts
-	.globl  disp_hex
-
-/*****************************************************
-*******   Text Strings for low level printing   ******
-*******          In section got2               *******
-*****************************************************/
-
-/*
- * Define the text strings for errors and warnings.
- * Switch to .data section.
- */
-	.section ".data"
-err_str:	.asciz "*** POST ERROR   = "
-warn_str:	.asciz "*** POST WARNING = "
-end_str:  .asciz "\r\n"
-
-/*
- * Enter the labels in Global Entry Table (GOT).
- * Switch to .got2 section.
- */
-	START_GOT
-	GOT_ENTRY(err_str)
-	GOT_ENTRY(warn_str)
-	GOT_ENTRY(end_str)
-	END_GOT
-
-/*
- * Switch  back to .text section.
- */
-	.text
-
-/****************************************
- ****************************************
- ********    LED register test   ********
- ****************************************
- ***************************************/
-test_led:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -12(r1)		/* Save back chain and move SP */
-	stw	r0, +16(r1)		/* Save link register */
-	stw	r4, +8(r1)		/* save R4 */
-
-	WATCHDOG_RESET			/* Reset the watchdog */
-
-	addi    r3, 0, ERR_FF		/* first test value is ffff */
-	addi	r4, r3, 0		/* save copy of pattern */
-	bl	set_led			/* store first test value */
-	bl	get_led			/* read it back */
-	xor.	r4, r4, r3		/* compare to original */
-#if defined(CONFIG_W7OLMC)
-	andi.   r4, r4, 0x00ff		/* lmc has 8 bits */
-#else
-	andi.   r4, r4, 0xffff		/* lmg has 16 bits */
-#endif
-	beq     LED2			/* next test */
-	addi    r3, 0, ERR_LED		/* error code = 1 */
-	bl	log_err			/* display error and halt */
-LED2:	addi    r3, 0, ERR_00		/* 2nd test value is 0000 */
-	addi	r4, r3, 0		/* save copy of pattern */
-	bl	set_led			/* store first test value */
-	bl	get_led			/* read it back */
-	xor.	r4, r4, r3		/* compare to original */
-#if defined(CONFIG_W7OLMC)
-	andi.   r4, r4, 0x00ff		/* lmc has 8 bits */
-#else
-	andi.   r4, r4, 0xffff		/* lmg has 16 bits */
-#endif
-	beq     LED3			/* next test */
-	addi    r3, 0, ERR_LED		/* error code = 1 */
-	bl	log_err			/* display error and halt */
-
-LED3:	/* restore stack and return */
-	lwz	r0, +16(r1)		/* Get saved link register */
-	mtlr	r0			/* Restore link register */
-	lwz	r4, +8(r1)		/* restore r4 */
-	addi	r1, r1, +12		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-/****************************************
- ****************************************
- ********     SDRAM TESTS        ********
- ****************************************
- ***************************************/
-test_sdram:
-	/* called with mem size in r3 */
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -16(r1)		/* Save back chain and move SP */
-	stw	r0, +20(r1)		/* Save link register */
-	stmw	r30, +8(r1)		/* save R30,R31 */
-					/* r30 is log2(mem size) */
-					/* r31 is mem size */
-
-	/* take log2 of total mem size */
-	addi	r31, r3, 0		/* save total mem size */
-	addi	r30, 0, 0		/* clear r30 */
-l2_loop:
-	srwi.	r31, r31, 1		/* shift right 1 */
-	addi	r30, r30, 1		/* count shifts */
-	bne	l2_loop			/* loop till done */
-	addi	r30, r30, -1		/* correct for over count */
-	addi	r31, r3, 0		/* save original size */
-
-	/* now kick the dog and test the mem */
-	WATCHDOG_RESET			/* Reset the watchdog */
-	bl	Data_Buster		/* test crossed/shorted data lines */
-	addi	r3, r30, 0		/* get log2(memsize) */
-	addi	r4, r31, 0		/* get memsize */
-	bl	Ghost_Buster		/* test crossed/shorted addr lines */
-	addi	r3, r31, 0		/* get mem size */
-	bl	Bit_Buster		/* check for bad internal bits */
-
-	/* restore stack and return */
-	lmw	r30, +8(r1)		/* Restore r30, r31 */
-	lwz	r0, +20(r1)		/* Get saved link register */
-	mtlr	r0			/* Restore link register */
-	addi	r1, r1, +16		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-
-/****************************************
- ********  sdram data bus test   ********
- ***************************************/
-Data_Buster:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -24(r1)		/* Save back chain and move SP */
-	stw	r0, +28(r1)		/* Save link register */
-	stmw	r28, 8(r1)		/* save r28 - r31 on stack */
-					/* r31 i/o register */
-					/* r30 sdram base address */
-					/* r29 5555 syndrom */
-					/* r28 aaaa syndrom */
-
-	/* set up led register for this test */
-	addi    r3, 0, ERR_RAMG		/* set led code to 1 */
-	bl	log_stat		/* store test value */
-	/* now test the dram data bus */
-	xor	r30, r30, r30		/* load r30 with base addr of sdram */
-	addis	r31, 0, 0x5555		/* load r31 with test value */
-	ori	r31, r31, 0x5555
-	stw	r31,0(r30)		/* sto the value */
-	lwz	r29,0(r30)		/* read it back */
-	xor	r29,r31,r29		/* compare it to original */
-	addis	r31, 0, 0xaaaa		/* load r31 with test value */
-	ori	r31, r31, 0xaaaa
-	stw	r31,0(r30)		/* sto the value */
-	lwz	r28,0(r30)		/* read it back */
-	xor	r28,r31,r28		/* compare it to original */
-	or	r3,r28,r29		/* or together both error terms */
-	/*
-	 * Now that we have the error bits,
-	 * we have to decide which part they are in.
-	 */
-	bl	get_idx			/* r5 is now index to error */
-	addi	r3, r3, ERR_RAMG
-	cmpwi	r3, ERR_RAMG		/* check for errors */
-	beq	db_done			/* skip if no errors */
-	bl	log_err			/* log the error */
-
-db_done:
-	lmw	r28, 8(r1)		/* restore r28 - r31 from stack */
-	lwz	r0, +28(r1)		/* Get saved link register */
-	addi	r1, r1, +24		/* Remove frame from stack */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-
-
-/****************************************************
- ********  test for address ghosting in dram ********
- ***************************************************/
-
-Ghost_Buster:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -36(r1)		/* Save back chain and move SP */
-	stw	r0, +40(r1)		/* Save link register */
-	stmw	r25, 8(r1)		/* save r25 - r31 on stack */
-					/* r31 = scratch register */
-					/* r30 is main referance loop counter,
-					   0 to 23 */
-					/* r29 is ghost loop count, 0 to 22 */
-					/* r28 is referance address */
-					/* r27 is ghost address */
-					/* r26 is log2 (mem size) =
-					     number of byte addr bits */
-					/* r25 is mem size */
-
-	/* save the log2(mem size) and mem size */
-	addi	r26, r3, 0		/* r26 is number of byte addr bits */
-	addi	r25, r4, 0		/* r25 is mem size in bytes */
-
-	/* set the leds for address ghost test */
-	addi	r3, 0, ERR_ADDG
-	bl	set_led
-
-	/* first fill memory with zeros */
-	srwi	r31, r25, 2		/* convert bytes to longs */
-	mtctr	r31			/* setup byte counter */
-	addi	r28, 0, 0		/* start at address at 0 */
-	addi	r31, 0, 0		/* data value = 0 */
-clr_loop:
-	stw	r31, 0(r28)		/* Store zero value */
-	addi	r28, r28, 4		/* Increment to next word */
-	andi.	r27, r28, 0xffff	/* check for 2^16 loops */
-	bne	clr_skip		/* if not there, then skip */
-	WATCHDOG_RESET			/* kick the dog every now and then */
-clr_skip:
-	bdnz	clr_loop		/* Round and round... */
-
-	/* now do main test */
-	addi	r30, 0, 0		/* start referance counter at 0 */
-outside:
-	/*
-	 * Calculate the referance address
-	 *   the referance address is calculated by setting the (r30-1)
-	 *   bit of the base address
-	 * when r30=0, the referance address is the base address.
-	 * thus the sequence 0,1,2,4,8,..,2^(n-1)
-	 * setting the bit is done with the following shift functions.
-	 */
-	WATCHDOG_RESET			/* Reset the watchdog */
-
-	addi	r31, 0, 1		/* r31 = 1 */
-	slw	r28, r31, r30		/* set bit coresponding to loop cnt */
-	srwi	r28, r28, 1		/* then shift it right one so  */
-					/*   we start at location 0 */
-	/* fill referance address with Fs */
-	addi	r31, 0, 0x00ff		/* r31 = one byte of set bits */
-	stb     r31,0(r28)		/* save ff in referance address */
-
-	/* ghost (inner) loop, now check all posible ghosted addresses */
-	addi	r29, 0, 0		/* start ghosted loop counter at 0 */
-inside:
-	/*
-	 * Calculate the ghost address by flipping one
-	 *  bit of referance address.  This gives the
-	 *  sequence 1,2,4,8,...,2^(n-1)
-	 */
-	addi	r31, 0, 1		/* r31 = 1 */
-	slw     r27, r31, r29		/* set  bit coresponding to loop cnt */
-	xor	r27, r28, r27		/* ghost address = ref addr with
-					     bit flipped*/
-
-	/* now check for ghosting */
-	lbz     r31,0(r27)		/* get content of ghost addr */
-	cmpwi   r31, 0			/* compare read value to 0 */
-	bne	Casper			/*   we found a ghost! */
-
-	/* now close ghost ( inner ) loop */
-	addi	r29, r29, 1		/* increment inner loop counter */
-	cmpw	r29, r26		/* check for last inner loop */
-	blt		inside		/* do more inner loops */
-
-	/* now close referance ( outer ) loop */
-	addi	r31, 0, 0		/* r31 = zero */
-	stb	r31, 0(28)		/* zero out the altered address loc. */
-	/*
-	 * Increment and check for end, count is zero based.
-	 * With the ble, this gives us one more loops than
-	 * address bits for sequence 0,1,2,4,8,...2^(n-1)
-	*/
-	addi	r30, r30, 1		/* increment outer loop counter */
-	cmpw	r30, r26		/* check for last inner loop */
-	ble	outside			/* do more outer loops */
-
-	/* were done, lets go home */
-	b	gb_done
-Casper:					/* we found a ghost !! */
-	addi	r3, 0, ERR_ADDF		/* get indexed error message */
-	bl	log_err			/* log error led error code */
-gb_done: /*  pack your bags, and go home */
-	lmw     r25, 8(r1)              /* restore r25 - r31 from stack */
-	lwz     r0, +40(r1)             /* Get saved link register */
-	addi    r1, r1, +36             /* Remove frame from stack */
-	mtlr    r0                      /* Restore link register */
-	blr                             /* Return to calling function */
-
-/****************************************************
- ********      SDRAM data fill tests       **********
- ***************************************************/
-Bit_Buster:
-	/* called with mem size in r3 */
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -16(r1)		/* Save back chain and move SP */
-	stw	r0, +20(r1)		/* Save link register */
-	stw	r4, +8(r1)		/* save R4 */
-	stw	r5, +12(r1)		/* save r5 */
-
-	addis	r5, r3, 0		/* save mem size */
-
-	/* Test 55555555 */
-	addi	r3, 0, ERR_R55G		/* set up error code in case we fail */
-	bl	log_stat		/* store test value */
-	addis	r4, 0, 0x5555
-	ori	r4, r4, 0x5555
-	bl	fill_test
-
-	/* Test aaaaaaaa  */
-	addi	r3, 0, ERR_RAAG		/* set up error code in case we fail */
-	bl	log_stat		/* store test value */
-	addis	r4, 0, 0xAAAA
-	ori	r4, r4, 0xAAAA
-	bl	fill_test
-
-	/* Test 00000000  */
-	addi	r3, 0, ERR_R00G		/* set up error code in case we fail */
-	bl	log_stat		/* store test value */
-	addis	r4, 0, 0
-	ori	r4, r4, 0
-	bl	fill_test
-
-	/* restore stack and return */
-	lwz	r5, +12(r1)		/* restore r4 */
-	lwz	r4, +8(r1)		/* restore r4 */
-	lwz	r0, +20(r1)		/* Get saved link register */
-	addi	r1, r1, +16		/* Remove frame from stack */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-
-
-/****************************************************
- ********             fill test              ********
- ***************************************************/
-/*	tests memory by filling with value, and reading back */
-/*	r5 = Size of memory in bytes */
-/*	r4 = Value to write */
-/*	r3 = Error code */
-fill_test:
-	mflr    r0                      /* Get link register */
-	stwu    r1, -32(r1)             /* Save back chain and move SP */
-	stw     r0, +36(r1)             /* Save link register */
-	stmw    r27, 8(r1)              /* save r27 - r31 on stack */
-					/* r31 - scratch register */
-					/* r30 - memory address */
-	mr	r27, r3
-	mr	r28, r4
-	mr	r29, r5
-
-	WATCHDOG_RESET			/* Reset the watchdog */
-
-	/* first fill memory with Value */
-	srawi	r31, r29, 2		/* convert bytes to longs */
-	mtctr	r31			/* setup counter */
-	addi	r30, 0, 0		/* Make r30 = addr 0 */
-ft_0:	stw	r28, 0(r30)		/* Store value */
-	addi	r30, r30, 4		/* Increment to next word */
-	andi.	r31, r30, 0xffff	/* check for 2^16 loops */
-	bne	ft_0a			/* if not there, then skip */
-	WATCHDOG_RESET			/* kick the dog every now and then */
-ft_0a:	bdnz	ft_0			/* Round and round... */
-
-	WATCHDOG_RESET			/* Reset the watchdog */
-
-	/* Now confirm Value is in memory */
-	srawi	r31, r29, 2		/* convert bytes to longs */
-	mtctr	r31			/* setup counter */
-	addi	r30, 0, 0		/* Make r30 = addr 0 */
-ft_1:	lwz	r31, 0(r30)		/* get value from memory */
-	xor.	r31, r31, r28		/* Writen = Read ? */
-	bne	ft_err			/* If bad, than halt */
-	addi	r30, r30, 4		/* Increment to next word */
-	andi.	r31, r30, 0xffff	/* check for 2^16 loops*/
-	bne	ft_1a			/* if not there, then skip */
-	WATCHDOG_RESET			/* kick the dog every now and then */
-ft_1a:	bdnz	ft_1			/* Round and round... */
-
-	WATCHDOG_RESET			/* Reset the watchdog */
-
-	b	fill_done		/* restore and return */
-
-ft_err:	addi	r29, r27, 0		/* save current led code */
-	addi	r27, r31, 0		/* get pattern in r27 */
-	bl	get_idx			/* get index from r27 */
-	add	r27, r27, r29		/* add index to old led code */
-	bl	log_err			/* output led err code, halt CPU */
-
-fill_done:
-	lmw     r27, 8(r1)              /* restore r27 - r31 from stack */
-	lwz     r0, +36(r1)             /* Get saved link register */
-	addi    r1, r1, +32             /* Remove frame from stack */
-	mtlr    r0                      /* Restore link register */
-	blr                             /* Return to calling function */
-
-
-/****************************************************
- *******  get error index from r3 pattern    ********
- ***************************************************/
-get_idx:				/* r3 = (MSW(r3) !=0)*2 +
-					    (LSW(r3) !=0) */
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -12(r1)		/* Save back chain and move SP */
-	stw	r0, +16(r1)		/* Save link register */
-	stw	r4, +8(r1)		/* save R4 */
-
-	andi.	r4, r3, 0xffff		/* check for lower bits */
-	beq	gi2			/* skip if no bits set */
-	andis.	r4, r3, 0xffff		/* check for upper bits */
-	beq	gi3			/* skip if no bits set */
-	addi	r3, 0, 3		/* both upper and lower bits set */
-	b	gi_done
-gi2:	andis.	r4, r3, 0xffff		/* check for upper bits*/
-	beq	gi4			/* skip if no bits set */
-	addi	r3, 0, 2		/* only upper bits set */
-	b	gi_done
-gi3:	addi	r3, 0, 1		/* only lower bits set */
-	b	gi_done
-gi4:	addi	r3, 0, 0		/* no bits set */
-gi_done:
-	/* restore stack and return */
-	lwz	r0, +16(r1)		/* Get saved link register */
-	mtlr	r0			/* Restore link register */
-	lwz	r4, +8(r1)		/* restore r4 */
-	addi	r1, r1, +12		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-/****************************************************
- ********       set LED to R5 and hang       ********
- ***************************************************/
-log_stat:				/* output a led code and continue */
-set_led:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -12(r1)		/* Save back chain and move SP */
-	stw	r0, +16(r1)		/* Save link register */
-	stw	r4, +8(r1)		/* save R4 */
-
-	addis	r4, 0, 0xfe00		/* LED buffer is at 0xfe000000 */
-#if defined(CONFIG_W7OLMG)		/* only on gateway, invert outputs */
-	xori	r3,r3, 0xffff		/* complement led code, active low */
-	sth	r3, 0(r4)		/* store first test value */
-	xori	r3,r3, 0xffff		/* complement led code, active low */
-#else					/* if not gateway, then don't invert */
-	sth	r3, 0(r4)		/* store first test value */
-#endif
-
-	/* restore stack and return */
-	lwz	r0, +16(r1)		/* Get saved link register */
-	mtlr	r0			/* Restore link register */
-	lwz	r4, +8(r1)		/* restore r4 */
-	addi	r1, r1, +12		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-get_led:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -12(r1)		/* Save back chain and move SP */
-	stw	r0, +16(r1)		/* Save link register */
-	stw	r4, +8(r1)		/* save R4 */
-
-	addis	r4, 0, 0xfe00		/* LED buffer is at 0xfe000000 */
-	lhz	r3, 0(r4)		/* store first test value */
-#if defined(CONFIG_W7OLMG)		/* only on gateway, invert inputs */
-	xori	r3,r3, 0xffff		/* complement led code, active low */
-#endif
-
-	/* restore stack and return */
-	lwz	r0, +16(r1)		/* Get saved link register */
-	mtlr	r0			/* Restore link register */
-	lwz	r4, +8(r1)		/* restore r4 */
-	addi	r1, r1, +12		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-log_err:	/* output the error and hang the board ( for now ) */
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -12(r1)		/* Save back chain and move SP */
-	stw	r0, +16(r1)		/* Save link register */
-	stw	r3, +8(r1)		/* save a copy of error code */
-	bl	set_led			/* set the led pattern */
-	GET_GOT				/* get GOT address in r14 */
-	lwz	r3,GOT(err_str)		/* get address of string */
-	bl	post_puts		/* output the warning string */
-	lwz	r3, +8(r1)		/* get error code */
-	addi	r4, 0, 2		/* set disp length to 2 nibbles */
-	bl	disp_hex		/* output the error code */
-	lwz	r3,GOT(end_str)		/* get address of string */
-	bl	post_puts		/* output the warning string */
-halt:
-	b	halt			/* hang */
-
-	/* restore stack and return */
-	lwz	r0, +16(r1)		/* Get saved link register */
-	mtlr	r0			/* Restore link register */
-	addi	r1, r1, +12		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-log_warn:	/* output a warning, then continue with operations */
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -16(r1)		/* Save back chain and move SP */
-	stw	r0, +20(r1)		/* Save link register */
-	stw	r3, +8(r1)		/* save a copy of error code */
-	stw	r14, +12(r1)		/* save a copy of r14 (used by GOT) */
-
-	bl	set_led			/* set the led pattern */
-	GET_GOT				/* get GOT address in r14 */
-	lwz	r3,GOT(warn_str)	/* get address of string */
-	bl	post_puts		/* output the warning string */
-	lwz	r3, +8(r1)		/* get error code */
-	addi	r4, 0, 2		/* set disp length to 2 nibbles */
-	bl	disp_hex		/* output the error code */
-	lwz	r3,GOT(end_str)		/* get address of string */
-	bl	post_puts		/* output the warning string */
-
-	addis	r3, 0, 64		/* has a long delay */
-	mtctr	r3
-log_2:
-	WATCHDOG_RESET			/* this keeps dog from barking, */
-					/*   and takes time */
-	bdnz	log_2			/* loop till time expires */
-
-	/* restore stack and return */
-	lwz	r0, +20(r1)		/* Get saved link register */
-	lwz	r14, +12(r1)		/* restore r14 */
-	mtlr	r0			/* Restore link register */
-	addi	r1, r1, +16		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-/*******************************************************************
- *	temp_uart_init
- *	Temporary UART initialization routine
- *	Sets up UART0 to run at 9600N81 off of the internal clock.
- *	R3-R4 are used.
- ******************************************************************/
-temp_uart_init:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -8(r1)		/* Save back chain and move SP */
-	stw	r0, +12(r1)		/* Save link register */
-
-	addis   r3, 0, 0xef60
-	ori     r3, r3, 0x0303          /* r3 = UART0_LCR */
-	addi    r4, 0, 0x83             /* n81 format, divisor regs enabled */
-	stb     r4, 0(r3)
-
-	/* set baud rate to use internal clock,
-	   baud = (200e6/16)/31/42 = 9600 */
-
-	addis   r3, 0, 0xef60		/* Address of baud divisor reg */
-	ori     r3, r3, 0x0300		/*   UART0_DLM */
-	addi    r4, 0, +42		/* uart baud divisor LSB = 93 */
-	stb     r4, 0(r3)               /* baud = (200 /16)/14/93 */
-
-	addi    r3, r3, 0x0001		/* uart baud divisor addr */
-	addi    r4, 0, 0
-	stb     r4, 0(r3)               /* Divisor Latch MSB = 0 */
-
-	addis   r3, 0, 0xef60
-	ori     r3, r3, 0x0303          /* r3 = UART0_LCR */
-	addi    r4, 0, 0x03             /* n81 format, tx/rx regs enabled */
-	stb     r4, 0(r3)
-
-	/* output a few line feeds */
-	addi	r3, 0, '\n'		/* load line feed */
-	bl	post_putc		/* output the char */
-	addi	r3, 0, '\n'		/* load line feed */
-	bl	post_putc		/* output the char */
-
-	/* restore stack and return */
-	lwz	r0, +12(r1)		/* Get saved link register */
-	mtlr	r0			/* Restore link register */
-	addi	r1, r1, +8		/* Remove frame from stack */
-	blr				/* Return to calling function */
-
-/**********************************************************************
- **	post_putc
- **	outputs charactor in R3
- **	r3 returns the error code ( -1 if there is an error )
- *********************************************************************/
-
-post_putc:
-
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -20(r1)		/* Save back chain and move SP */
-	stw	r0, +24(r1)		/* Save link register */
-	stmw	r29, 8(r1)		/* save	r29 - r31 on stack
-					   r31 - uart base address
-					   r30 - delay counter
-					   r29 - scratch reg */
-
-     addis   r31, 0, 0xef60		/* Point to uart base */
-     ori     r31, r31, 0x0300
-     addis   r30, 0, 152		/* Load about 10,000,000 ticks. */
-pputc_lp:
-	lbz     r29, 5(r31)		/* Read Line Status Register */
-	andi.   r29, r29, 0x20		/* Check THRE status */
-	bne     thre_set		/* Branch if FIFO empty */
-	addic.  r30, r30, -1		/* Decrement and check if empty. */
-	bne     pputc_lp		/* Try, try again */
-	addi    r3, 0, -1		/* Load error code for timeout */
-	b       pputc_done		/* Bail out with error code set */
-thre_set:
-	stb     r3, 0(r31)		/* Store character to UART */
-	addi	r3, 0, 0		/* clear error code */
-pputc_done:
-	lmw	r29, 8(r1)		/*restore r29 - r31 from stack */
-	lwz	r0, +24(r1)		/* Get saved link register */
-	addi	r1, r1, +20		/* Remove frame from stack */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-
-
-/****************************************************************
-    post_puts
-    Accepts a null-terminated string pointed to by R3
-    Outputs to the serial port until 0x00 is found.
-    r3 returns the error code ( -1 if there is an error )
-*****************************************************************/
-post_puts:
-
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -12(r1)		/* Save back chain and move SP */
-	stw	r0, +16(r1)		/* Save link register */
-	stw	r31, 8(r1)		/* save r31 - char pointer */
-
-	addi	r31, r3, 0              /* move pointer to R31 */
-pputs_nxt:
-	lbz	r3, 0(r31)		/* Get next character */
-	addic.  r3, r3, 0		/* Check for zero */
-	beq	pputs_term		/* bail out if zero */
-	bl	post_putc		/* output the char */
-	addic.	r3, r3, 0		/* check for error */
-	bne	pputs_err
-	addi	r31, r31, 1		/* point to next char */
-	b	pputs_nxt		/* loop till term */
-pputs_err:
-	addi	r3, 0, -1		/* set error code */
-	b	pputs_end		/* were outa here */
-pputs_term:
-	addi	r3, 0, 1		/* set success code */
-	/* restore stack and return */
-pputs_end:
-	lwz	r31, 8(r1)		/* restore r27 - r31 from stack */
-	lwz	r0, +16(r1)		/* Get saved link register */
-	addi	r1, r1, +12		/* Remove frame from stack */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */
-
-
-/********************************************************************
- *****	disp_hex
- *****	Routine to display a hex value from a register.
- *****	R3 is value to display
- *****	R4 is number of nibbles to display ie 2 for byte 8 for (long)word
- *****	Returns -1 in R3 if there is an error ( ie serial port hangs )
- *****	Returns 0 in R3 if no error
- *******************************************************************/
-disp_hex:
-	/* save the return info on stack */
-	mflr	r0			/* Get link register */
-	stwu	r1, -16(r1)		/* Save back chain and move SP */
-	stw	r0, +20(r1)		/* Save link register */
-	stmw	r30, 8(r1)		/* save r30 - r31 on stack */
-					/* r31 output char */
-					/* r30 uart base address */
-	addi	r30, 0, 8               /* Go through 8 nibbles. */
-	addi	r31, r3, 0
-pputh_nxt:
-	rlwinm	r31, r31, 4, 0, 31	/* Rotate next nibble into position */
-	andi.	r3, r31, 0x0f		/* Get nibble. */
-	addi	r3, r3, 0x30		/* Add zero's ASCII code. */
-	cmpwi	r3, 0x03a
-	blt	pputh_out
-	addi	r3, r3, 0x07            /* 0x27 for lower case. */
-pputh_out:
-	cmpw	r30, r4
-	bgt	pputh_skip
-	bl	post_putc
-	addic.	r3, r3, 0		/* check for error */
-	bne	pputh_err
-pputh_skip:
-	addic.	r30, r30, -1
-	bne	pputh_nxt
-	xor	r3, r3, r3		/* Clear error code */
-	b	pputh_done
-pputh_err:
-	addi	r3, 0, -1		/* set error code */
-pputh_done:
-	/* restore stack and return */
-	lmw	r30, 8(r1)		/*  restore r30 - r31 from stack */
-	lwz	r0, +20(r1)		/* Get saved link register */
-	addi	r1, r1, +16		/* Remove frame from stack */
-	mtlr	r0			/* Restore link register */
-	blr				/* Return to calling function */

board/w7o/post2.c

@@ -1,98 +0,0 @@
-/*
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net
- *   and
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <rtc.h>
-#include "errors.h"
-#include "dtt.h"
-
-/* for LM75 DTT POST test */
-#define DTT_READ_TEMP		0x0
-#define DTT_CONFIG		0x1
-#define DTT_TEMP_HYST		0x2
-#define DTT_TEMP_SET		0x3
-
-#if defined(CONFIG_RTC_M48T35A)
-void rtctest(void)
-{
-    volatile uchar *tchar = (uchar*)(CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 9);
-    struct rtc_time tmp;
-
-    /* set up led code for RTC tests */
-    log_stat(ERR_RTCG);
-
-    /*
-     * Do RTC battery test. The first write after power up
-     * fails if battery is low.
-     */
-    *tchar = 0xaa;
-    if ((*tchar ^ 0xaa) != 0x0) log_warn(ERR_RTCBAT);
-    *tchar = 0x55;				/* Reset test address */
-
-    /*
-     * Now lets check the validity of the values in the RTC.
-     */
-    rtc_get(&tmp);
-    if ((tmp.tm_sec < 0)	| (tmp.tm_sec  > 59)   |
-	(tmp.tm_min < 0)	| (tmp.tm_min  > 59)   |
-	(tmp.tm_hour < 0)	| (tmp.tm_hour > 23)   |
-	(tmp.tm_mday < 1 )	| (tmp.tm_mday > 31)   |
-	(tmp.tm_mon < 1 )	| (tmp.tm_mon  > 12)   |
-	(tmp.tm_year < 2000)	| (tmp.tm_year > 2500) |
-	(tmp.tm_wday < 1 )	| (tmp.tm_wday > 7)) {
-	log_warn(ERR_RTCTIM);
-	rtc_reset();
-    }
-
-    /*
-     * Now lets do a check to see if the NV RAM is there.
-     */
-    *tchar = 0xaa;
-    if ((*tchar ^ 0xaa) != 0x0) log_err(ERR_RTCVAL);
-    *tchar = 0x55;				/* Reset test address */
-
-} /* rtctest() */
-#endif	/* CONFIG_RTC_M48T35A */
-
-
-#ifdef CONFIG_DTT_LM75
-int dtt_test(int sensor)
-{
-    short temp, trip, hyst;
-
-    /* get values */
-    temp = dtt_read(sensor, DTT_READ_TEMP) / 256;
-    trip = dtt_read(sensor, DTT_TEMP_SET) / 256;
-    hyst = dtt_read(sensor, DTT_TEMP_HYST) / 256;
-
-    /* check values */
-    if ((hyst != (CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS)) ||
-	(trip != CONFIG_SYS_DTT_MAX_TEMP) ||
-	(temp < CONFIG_SYS_DTT_LOW_TEMP) || (temp > CONFIG_SYS_DTT_MAX_TEMP))
-	return 1;
-
-    return 0;
-} /* dtt_test() */
-#endif /* CONFIG_DTT_LM75 */
-
-/*****************************************/
-
-void post2(void)
-{
-#if defined(CONFIG_RTC_M48T35A)
-    rtctest();
-#endif	/* CONFIG_RTC_M48T35A */
-
-#ifdef CONFIG_DTT_LM75
-    log_stat(ERR_TempG);
-    if(dtt_test(2) != 0) log_warn(ERR_Ttest0);
-    if(dtt_test(4) != 0) log_warn(ERR_Ttest1);
-#endif /* CONFIG_DTT_LM75 */
-} /* post2() */

board/w7o/u-boot.lds.debug

@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-    arch/powerpc/lib/extable.o	(.text)
-
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}

board/w7o/vpd.c

@@ -1,412 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#if defined(VXWORKS)
-#include <stdio.h>
-#include <string.h>
-#define CONFIG_SYS_DEF_EEPROM_ADDR 0xa0
-extern char iicReadByte(char, char);
-extern ulong_t crc32(unsigned char *, unsigned long);
-#else
-#include <common.h>
-#endif
-
-#include "vpd.h"
-
-/*
- * vpd_reader() - reads VPD data from I2C EEPROMS.
- *                returns pointer to buffer or NULL.
- */
-static unsigned char *vpd_reader(unsigned char *buf, unsigned dev_addr,
-				 unsigned off, unsigned count)
-{
-	unsigned offset = off;	/* Calculated offset */
-
-	/*
-	 * The main board EEPROM contains
-	 * SDRAM SPD in the first 128 bytes,
-	 * so skew the offset.
-	 */
-	if (dev_addr == CONFIG_SYS_DEF_EEPROM_ADDR)
-		offset += SDRAM_SPD_DATA_SIZE;
-
-	/* Try to read the I2C EEPROM */
-#if defined(VXWORKS)
-	{
-		int i;
-
-		for (i = 0; i < count; ++i)
-			buf[i] = iicReadByte(dev_addr, offset + i);
-	}
-#else
-	if (eeprom_read(dev_addr, offset, buf, count)) {
-		printf("Failed to read %d bytes from VPD EEPROM 0x%x @ 0x%x\n",
-			count, dev_addr, offset);
-		return NULL;
-	}
-#endif
-
-	return buf;
-}
-
-
-/*
- * vpd_get_packet() - returns next VPD packet or NULL.
- */
-static vpd_packet_t *vpd_get_packet(vpd_packet_t * vpd_packet)
-{
-	vpd_packet_t *packet = vpd_packet;
-
-	if (packet != NULL) {
-		if (packet->identifier == VPD_PID_TERM)
-			return NULL;
-		else
-			packet = (vpd_packet_t *) ((char *) packet +
-						   packet->size + 2);
-	}
-
-	return packet;
-}
-
-
-/*
- * vpd_find_packet() - Locates and returns the specified
- *		       VPD packet or NULL on error.
- */
-static vpd_packet_t *vpd_find_packet(vpd_t * vpd, unsigned char ident)
-{
-	vpd_packet_t *packet = (vpd_packet_t *) &vpd->packets;
-
-	/* Guaranteed illegal */
-	if (ident == VPD_PID_GI)
-		return NULL;
-
-	/* Scan tuples looking for a match */
-	while ((packet->identifier != ident) &&
-	       (packet->identifier != VPD_PID_TERM))
-		packet = vpd_get_packet(packet);
-
-	/* Did we find it? */
-	if ((packet->identifier) && (packet->identifier != ident))
-		return NULL;
-	return packet;
-}
-
-
-/*
- * vpd_is_valid() - Validates contents of VPD data
- *		    in I2C EEPROM.  Returns 1 for
- *		    success or 0 for failure.
- */
-static int vpd_is_valid(unsigned dev_addr, unsigned char *buf)
-{
-	unsigned num_bytes;
-	vpd_packet_t *packet;
-	vpd_t *vpd = (vpd_t *) buf;
-	unsigned short stored_crc16, calc_crc16 = 0xffff;
-
-	/* Check Eyecatcher */
-	if (strncmp
-	    ((char *) (vpd->header.eyecatcher), VPD_EYECATCHER,
-	     VPD_EYE_SIZE) != 0) {
-		unsigned offset = 0;
-
-		if (dev_addr == CONFIG_SYS_DEF_EEPROM_ADDR)
-			offset += SDRAM_SPD_DATA_SIZE;
-		printf("Error: VPD EEPROM 0x%x corrupt @ 0x%x\n", dev_addr,
-		       offset);
-
-		return 0;
-	}
-
-	/* Check Length */
-	if (vpd->header.size > VPD_MAX_EEPROM_SIZE) {
-		printf("Error: VPD EEPROM 0x%x contains bad size 0x%x\n",
-		       dev_addr, vpd->header.size);
-		return 0;
-	}
-
-	/* Now find the termination packet */
-	packet = vpd_find_packet(vpd, VPD_PID_TERM);
-	if (packet == NULL) {
-		printf("Error: VPD EEPROM 0x%x missing termination packet\n",
-		       dev_addr);
-		return 0;
-	}
-
-	/* Calculate data size */
-	num_bytes = (unsigned long) ((unsigned char *) packet -
-				     (unsigned char *) vpd +
-				     sizeof(vpd_packet_t));
-
-	/* Find stored CRC and clear it */
-	packet = vpd_find_packet(vpd, VPD_PID_CRC);
-	if (packet == NULL) {
-		printf("Error: VPD EEPROM 0x%x missing CRC\n", dev_addr);
-		return 0;
-	}
-	memcpy(&stored_crc16, packet->data, sizeof(ushort));
-	memset(packet->data, 0, sizeof(ushort));
-
-	/* OK, lets calculate the CRC and check it */
-#if defined(VXWORKS)
-	calc_crc16 = (0xffff & crc32(buf, num_bytes));
-#else
-	calc_crc16 = (0xffff & crc32(0, buf, num_bytes));
-#endif
-	/* Now restore the CRC */
-	memcpy(packet->data, &stored_crc16, sizeof(ushort));
-	if (stored_crc16 != calc_crc16) {
-		printf("Error: VPD EEPROM 0x%x has bad CRC 0x%x\n",
-		       dev_addr, stored_crc16);
-		return 0;
-	}
-
-	return 1;
-}
-
-
-/*
- * size_ok() - Check to see if packet size matches
- *	       size of data we want. Returns 1 for
- *	       good match or 0 for failure.
- */
-static int size_ok(vpd_packet_t *packet, unsigned long size)
-{
-	if (packet->size != size) {
-		printf("VPD Packet 0x%x corrupt.\n", packet->identifier);
-		return 0;
-	}
-	return 1;
-}
-
-
-/*
- * strlen_ok() - Check to see if packet size matches
- *		 strlen of the string we want to populate.
- *		 Returns 1 for valid length or 0 for failure.
- */
-static int strlen_ok(vpd_packet_t *packet, unsigned long length)
-{
-	if (packet->size >= length) {
-		printf("VPD Packet 0x%x corrupt.\n", packet->identifier);
-		return 0;
-	}
-	return 1;
-}
-
-
-/*
- * get_vpd_data() - populates the passed VPD structure 'vpdInfo'
- *		    with data obtained from the specified
- *		    I2C EEPROM 'dev_addr'.  Returns 0 for
- *		    success or 1 for failure.
- */
-int vpd_get_data(unsigned char dev_addr, VPD *vpdInfo)
-{
-	unsigned char buf[VPD_EEPROM_SIZE];
-	vpd_t *vpd = (vpd_t *) buf;
-	vpd_packet_t *packet;
-
-	if (vpdInfo == NULL)
-		return 1;
-
-	/*
-	 * Fill vpdInfo with 0s to blank out
-	 * unused fields, fill vpdInfo->ethAddrs
-	 * with all 0xffs so that other's code can
-	 * determine how many real Ethernet addresses
-	 * there are.  OUIs starting with 0xff are
-	 * broadcast addresses, and would never be
-	 * permantely stored.
-	 */
-	memset((void *) vpdInfo, 0, sizeof(VPD));
-	memset((void *) &vpdInfo->ethAddrs, 0xff, sizeof(vpdInfo->ethAddrs));
-	vpdInfo->_devAddr = dev_addr;
-
-	/* Read the minimum size first */
-	if (vpd_reader(buf, dev_addr, 0, VPD_EEPROM_SIZE) == NULL)
-		return 1;
-
-	/* Check validity of VPD data */
-	if (!vpd_is_valid(dev_addr, buf)) {
-		printf("VPD Data is INVALID!\n");
-		return 1;
-	}
-
-	/*
-	 * Walk all the packets and populate
-	 * the VPD info structure.
-	 */
-	packet = (vpd_packet_t *) &vpd->packets;
-	do {
-		switch (packet->identifier) {
-		case VPD_PID_GI:
-			printf("Error: Illegal VPD value\n");
-			break;
-		case VPD_PID_PID:
-			if (strlen_ok(packet, MAX_PROD_ID)) {
-				strncpy(vpdInfo->productId,
-					(char *) (packet->data),
-					packet->size);
-			}
-			break;
-		case VPD_PID_REV:
-			if (size_ok(packet, sizeof(char)))
-				vpdInfo->revisionId = *packet->data;
-			break;
-		case VPD_PID_SN:
-			if (size_ok(packet, sizeof(unsigned long))) {
-				memcpy(&vpdInfo->serialNum,
-					packet->data,
-					sizeof(unsigned long));
-			}
-			break;
-		case VPD_PID_MANID:
-			if (size_ok(packet, sizeof(unsigned char)))
-				vpdInfo->manuID = *packet->data;
-			break;
-		case VPD_PID_PCO:
-			if (size_ok(packet, sizeof(unsigned long))) {
-				memcpy(&vpdInfo->configOpt,
-					packet->data,
-					sizeof(unsigned long));
-			}
-			break;
-		case VPD_PID_SYSCLK:
-			if (size_ok(packet, sizeof(unsigned long)))
-				memcpy(&vpdInfo->sysClk,
-					packet->data,
-					sizeof(unsigned long));
-			break;
-		case VPD_PID_SERCLK:
-			if (size_ok(packet, sizeof(unsigned long)))
-				memcpy(&vpdInfo->serClk,
-					packet->data,
-					sizeof(unsigned long));
-			break;
-		case VPD_PID_FLASH:
-			if (size_ok(packet, 9)) {	/* XXX - hardcoded,
-							   padding in struct */
-				memcpy(&vpdInfo->flashCfg, packet->data, 9);
-			}
-			break;
-		case VPD_PID_ETHADDR:
-			memcpy(vpdInfo->ethAddrs, packet->data, packet->size);
-			break;
-		case VPD_PID_POTS:
-			if (size_ok(packet, sizeof(char)))
-				vpdInfo->numPOTS = (unsigned) *packet->data;
-			break;
-		case VPD_PID_DS1:
-			if (size_ok(packet, sizeof(char)))
-				vpdInfo->numDS1 = (unsigned) *packet->data;
-		case VPD_PID_GAL:
-		case VPD_PID_CRC:
-		case VPD_PID_TERM:
-			break;
-		default:
-			printf("Warning: Found unknown VPD packet ID 0x%x\n",
-			       packet->identifier);
-			break;
-		}
-	} while ((packet = vpd_get_packet(packet)));
-
-	return 0;
-}
-
-
-/*
- * vpd_init() - Initialize default VPD environment
- */
-int vpd_init(unsigned char dev_addr)
-{
-	return 0;
-}
-
-
-/*
- * vpd_print() - Pretty print the VPD data.
- */
-void vpd_print(VPD *vpdInfo)
-{
-	const char *const sp = "";
-	const char *const sfmt = "%4s%-20s: \"%s\"\n";
-	const char *const cfmt = "%4s%-20s: '%c'\n";
-	const char *const dfmt = "%4s%-20s: %ld\n";
-	const char *const hfmt = "%4s%-20s: %08lX\n";
-	const char *const dsfmt = "%4s%-20s: %d\n";
-	const char *const hsfmt = "%4s%-20s: %04X\n";
-	const char *const dhfmt = "%4s%-20s: %ld (%lX)\n";
-
-	printf("VPD read from I2C device: %02X\n", vpdInfo->_devAddr);
-
-	if (vpdInfo->productId[0])
-		printf(sfmt, sp, "Product ID", vpdInfo->productId);
-	else
-		printf(sfmt, sp, "Product ID", "UNKNOWN");
-
-	if (vpdInfo->revisionId)
-		printf(cfmt, sp, "Revision ID", vpdInfo->revisionId);
-
-	if (vpdInfo->serialNum)
-		printf(dfmt, sp, "Serial Number", vpdInfo->serialNum);
-
-	if (vpdInfo->manuID)
-		printf(dfmt, sp, "Manufacture ID", (long) vpdInfo->manuID);
-
-	if (vpdInfo->configOpt)
-		printf(hfmt, sp, "Configuration", vpdInfo->configOpt);
-
-	if (vpdInfo->sysClk)
-		printf(dhfmt, sp, "System Clock", vpdInfo->sysClk,
-		       vpdInfo->sysClk);
-
-	if (vpdInfo->serClk)
-		printf(dhfmt, sp, "Serial Clock", vpdInfo->serClk,
-		       vpdInfo->serClk);
-
-	if (vpdInfo->numPOTS)
-		printf(dfmt, sp, "Number of POTS lines", vpdInfo->numPOTS);
-
-	if (vpdInfo->numDS1)
-		printf(dfmt, sp, "Number of DS1s", vpdInfo->numDS1);
-
-	/* Print Ethernet Addresses */
-	if (vpdInfo->ethAddrs[0][0] != 0xff) {
-		int i, j;
-
-		printf("%4sEtherNet Address(es): ", sp);
-		for (i = 0; i < MAX_ETH_ADDRS; i++) {
-			if (vpdInfo->ethAddrs[i][0] != 0xff) {
-				for (j = 0; j < 6; j++) {
-					printf("%02X",
-					       vpdInfo->ethAddrs[i][j]);
-					if (((j + 1) % 6) != 0)
-						printf(":");
-					else
-						printf(" ");
-				}
-				if (((i + 1) % 3) == 0)
-					printf("\n%24s: ", sp);
-			}
-		}
-		printf("\n");
-	}
-
-	if (vpdInfo->flashCfg.mfg && vpdInfo->flashCfg.dev) {
-		printf("Main Flash Configuration:\n");
-		printf(hsfmt, sp, "Manufacture ID", vpdInfo->flashCfg.mfg);
-		printf(hsfmt, sp, "Device ID", vpdInfo->flashCfg.dev);
-		printf(dsfmt, sp, "Device Width", vpdInfo->flashCfg.devWidth);
-		printf(dsfmt, sp, "Num. Devices", vpdInfo->flashCfg.numDevs);
-		printf(dsfmt, sp, "Num. Columns", vpdInfo->flashCfg.numCols);
-		printf(dsfmt, sp, "Column Width", vpdInfo->flashCfg.colWidth);
-		printf(dsfmt, sp, "WE Data Width",
-		       vpdInfo->flashCfg.weDataWidth);
-	}
-}

board/w7o/vpd.h

@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _VPD_H_
-#define _VPD_H_
-
-/*
- * Main Flash Configuration.
- */
-typedef struct flashCfg_s {
-    unsigned short mfg;				/* Manufacture ID */
-    unsigned short dev;				/* Device ID */
-    unsigned char devWidth;			/* Device Width */
-    unsigned char numDevs;			/* Number of devices */
-    unsigned char numCols;			/* Number of columns */
-    unsigned char colWidth;			/* Width of a column */
-    unsigned char weDataWidth;			/* Write/Erase Data Width */
-} flashCfg_t;
-
-/*
- * Vital Product Data - VPD
- */
-#define MAX_PROD_ID		15
-#define MAX_ETH_ADDRS		10
-typedef unsigned char EthAddr[6];
-typedef struct vpd {
-    unsigned char _devAddr;			/* Device address during read */
-    char productId[MAX_PROD_ID];		/* Product ID */
-    char revisionId;				/* Revision ID as a char */
-    unsigned long serialNum;			/* Serial number */
-    unsigned char  manuID;			/* Manufact ID - byte int */
-    unsigned long configOpt;			/* Config Option - bit field */
-    unsigned long sysClk;			/* System clock in Hertz */
-    unsigned long serClk;			/* Ext. clock in Hertz */
-    flashCfg_t flashCfg;			/* Flash configuration */
-    unsigned long numPOTS;			/* Number of POTS lines */
-    unsigned long numDS1;			/* Number of DS1 circuits */
-    EthAddr ethAddrs[MAX_ETH_ADDRS];		/* Ethernet MAC, 1st = craft */
-} VPD;
-
-
-#define VPD_MAX_EEPROM_SIZE	512		/* Max size VPD EEPROM */
-#define SDRAM_SPD_DATA_SIZE	128		/* Size SPD in VPD EEPROM */
-
-/*
- * PIDs - Packet Identifiers
- */
-#define VPD_PID_GI		0x0		/* Guaranted Illegal */
-#define VPD_PID_PID		0x1		/* Product Identifier */
-#define VPD_PID_REV		0x2		/* Product Revision */
-#define VPD_PID_SN		0x3		/* Serial Number */
-#define VPD_PID_MANID		0x4		/* Manufacture ID */
-#define VPD_PID_PCO		0x5		/* Product configuration */
-#define VPD_PID_SYSCLK		0x6		/* System Clock */
-#define VPD_PID_SERCLK		0x7		/* Ser. Clk. Speed in Hertz */
-#define VPD_PID_CRC		0x8		/* VPD CRC */
-#define VPD_PID_FLASH		0x9		/* Flash Configuration */
-#define VPD_PID_ETHADDR		0xA		/* Ethernet Address(es) */
-#define VPD_PID_GAL		0xB		/* Galileo Switch Config */
-#define VPD_PID_POTS		0xC		/* Number of POTS Lines */
-#define VPD_PID_DS1		0xD		/* Number of DS1s */
-#define VPD_PID_TERM		0xFF		/* Termination packet */
-
-/*
- * VPD - Eyecatcher/Magic
- */
-#define VPD_EYECATCHER		"W7O"
-#define VPD_EYE_SIZE		3
-typedef struct vpd_header {
-    unsigned char eyecatcher[VPD_EYE_SIZE];	/* eyecatcher - "W7O" */
-    unsigned short size __attribute__((packed)); /* size of EEPROM */
-} vpd_header_t;
-
-
-#define VPD_DATA_SIZE (VPD_MAX_EEPROM_SIZE - SDRAM_SPD_DATA_SIZE - \
-			sizeof(vpd_header_t))
-typedef struct vpd_s {
-    vpd_header_t header;
-    unsigned char packets[VPD_DATA_SIZE];
-} vpd_t;
-
-typedef struct vpd_packet {
-    unsigned char identifier;
-    unsigned char size;
-    unsigned char data[1];
-} vpd_packet_t;
-
-/*
- * VPD configOpt bit mask
- */
-#define VPD_HAS_BBRAM		0x1		/* Battery backed SRAM */
-#define VPD_HAS_RTC		0x2		/* Battery backed RTC */
-#define VPD_HAS_EXT_SER_CLK	0x4		/* External serial clock */
-#define VPD_HAS_SER_TRANS_1	0x8		/* COM1 transceiver */
-#define VPD_HAS_SER_TRANS_2	0x10		/* COM2 transceiver */
-#define VPD_HAS_CRAFT_PHY	0x20		/* CRAFT Ethernet */
-#define VPD_HAS_DTT_1		0x40		/* I2C Digital therm. #1 */
-#define VPD_HAS_DTT_2		0x80		/* I2C Digital therm. #2 */
-#define VPD_HAS_1000_UP_LASER	0x100		/* GMM - 1000Mbit Uplink */
-#define VPD_HAS_70KM_UP_LASER	0x200		/* CMM - 70KM Uplink laser */
-#define VPD_HAS_2_UPLINKS	0x400		/* CMM - 2 uplink lasers */
-#define VPD_HAS_FPGA		0x800		/* Has 1 or more FPGAs */
-#define VPD_HAS_DFA		0x1000		/* CLM - Has 2 Fiber Inter. */
-#define VPD_HAS_GAL_SWITCH	0x2000		/* GMM - Has a Gal switch */
-#define VPD_HAS_POTS_LINES	0x4000		/* GMM - Has POTS lines */
-#define VPD_HAS_DS1_CHANNELS	0x8000		/* GMM - Has DS1 channels */
-#define VPD_HAS_CABLE_RETURN	0x10000		/* GBM/GBR - Cable ret. path */
-
-#define VPD_EEPROM_SIZE         (256 - SDRAM_SPD_DATA_SIZE) /* Size EEPROM */
-
-extern int vpd_get_data(unsigned char dev_addr, VPD *vpd);
-extern void vpd_print(VPD *vpdInfo);
-
-#endif /* _VPD_H_ */

board/w7o/w7o.c

@@ -1,257 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include "w7o.h"
-#include <asm/processor.h>
-
-#include "vpd.h"
-#include "errors.h"
-#include <watchdog.h>
-
-unsigned long get_dram_size (void);
-void sdram_init(void);
-
-/* ------------------------------------------------------------------------- */
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_W7OLMG)
-	/*
-	 * Setup GPIO pins - reset devices.
-	 */
-	out32 (PPC405GP_GPIO0_ODR, 0x10000000);	/* one open drain pin */
-	out32 (PPC405GP_GPIO0_OR, 0x3E000000);	/* set output pins to default */
-	out32 (PPC405GP_GPIO0_TCR, 0x7f800000);	/* setup for output */
-
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) XILINX; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) PCI INT A; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) PCI INT B; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) SAM 2; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) Battery Bad; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive
-	 */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr (UIC0PR, 0xFFFFFF80);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,
-					   INT0 highest priority */
-
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-#elif defined(CONFIG_W7OLMC)
-	/*
-	 * Setup GPIO pins
-	 */
-	out32 (PPC405GP_GPIO0_ODR, 0x01800000);	/* XCV Done Open Drain */
-	out32 (PPC405GP_GPIO0_OR, 0x03800000);	/* set out pins to default */
-	out32 (PPC405GP_GPIO0_TCR, 0x66C00000);	/* setup for output */
-
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) DBE 0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) DBE 1; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) DBE 2; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) DBE Common; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) PCI; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive
-	 */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr (UIC0PR, 0xFFFFFF80);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,
-					   INT0 highest priority */
-
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-#else  /* Unknown */
-#    error "Unknown W7O board configuration"
-#endif
-
-	WATCHDOG_RESET ();	/* Reset the watchdog */
-	temp_uart_init ();	/* init the uart for debug */
-	WATCHDOG_RESET ();	/* Reset the watchdog */
-	test_led ();		/* test the LEDs */
-	test_sdram (get_dram_size ());	/* test the dram */
-	log_stat (ERR_POST1);	/* log status,post1 complete */
-	return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	VPD vpd;
-
-	puts ("Board: ");
-
-	/* VPD data present in I2C EEPROM */
-	if (vpd_get_data (CONFIG_SYS_DEF_EEPROM_ADDR, &vpd) == 0) {
-		/*
-		 * Known board type.
-		 */
-		if (vpd.productId[0] &&
-		    ((strncmp (vpd.productId, "GMM", 3) == 0) ||
-		     (strncmp (vpd.productId, "CMM", 3) == 0))) {
-
-			/* Output board information on startup */
-			printf ("\"%s\", revision '%c', serial# %ld, manufacturer %u\n", vpd.productId, vpd.revisionId, vpd.serialNum, vpd.manuID);
-			return (0);
-		}
-	}
-
-	puts ("### Unknown HW ID - assuming NOTHING\n");
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	/*
-	 * ToDo: Move the asm init routine sdram_init() to this C file,
-	 * or even better use some common ppc4xx code available
-	 * in arch/powerpc/cpu/ppc4xx
-	 */
-	sdram_init();
-
-	return get_dram_size ();
-}
-
-unsigned long get_dram_size (void)
-{
-	int tmp, i, regs[4];
-	int size = 0;
-
-	/* Get bank Size registers */
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);	/* get bank 0 config reg */
-	regs[0] = mfdcr (SDRAM0_CFGDATA);
-
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);	/* get bank 1 config reg */
-	regs[1] = mfdcr (SDRAM0_CFGDATA);
-
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);	/* get bank 2 config reg */
-	regs[2] = mfdcr (SDRAM0_CFGDATA);
-
-	mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);	/* get bank 3 config reg */
-	regs[3] = mfdcr (SDRAM0_CFGDATA);
-
-	/* compute the size, add each bank if enabled */
-	for (i = 0; i < 4; i++) {
-		if (regs[i] & 0x0001) {	/* if enabled, */
-			tmp = ((regs[i] >> (31 - 14)) & 0x7);	/* get size bits */
-			tmp = 0x400000 << tmp;	/* Size bits X 4MB = size */
-			size += tmp;
-		}
-	}
-
-	return size;
-}
-
-int misc_init_f (void)
-{
-	return 0;
-}
-
-static void w7o_env_init (VPD * vpd)
-{
-	/*
-	 * Read VPD
-	 */
-	if (vpd_get_data (CONFIG_SYS_DEF_EEPROM_ADDR, vpd) != 0)
-		return;
-
-	/*
-	 * Known board type.
-	 */
-	if (vpd->productId[0] &&
-	    ((strncmp (vpd->productId, "GMM", 3) == 0) ||
-	     (strncmp (vpd->productId, "CMM", 3) == 0))) {
-		char buf[30];
-		char *eth;
-		char *serial = getenv ("serial#");
-		char *ethaddr = getenv ("ethaddr");
-
-		/* Set 'serial#' envvar if serial# isn't set */
-		if (!serial) {
-			sprintf (buf, "%s-%ld", vpd->productId,
-				 vpd->serialNum);
-			setenv ("serial#", buf);
-		}
-
-		/* Set 'ethaddr' envvar if 'ethaddr' envvar is the default */
-		eth = (char *)(vpd->ethAddrs[0]);
-		if (ethaddr
-		    && (strcmp(ethaddr, __stringify(CONFIG_ETHADDR)) == 0)) {
-			/* Now setup ethaddr */
-			sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
-				 eth[0], eth[1], eth[2], eth[3], eth[4],
-				 eth[5]);
-			setenv ("ethaddr", buf);
-		}
-	}
-}				/* w7o_env_init() */
-
-
-int misc_init_r (void)
-{
-	VPD vpd;		/* VPD information */
-
-#if defined(CONFIG_W7OLMG)
-	unsigned long greg;	/* GPIO Register */
-
-	greg = in32 (PPC405GP_GPIO0_OR);
-
-	/*
-	 * XXX - Unreset devices - this should be moved into VxWorks driver code
-	 */
-	greg |= 0x41800000L;	/* SAM, PHY, Galileo */
-
-	out32 (PPC405GP_GPIO0_OR, greg);	/* set output pins to default */
-#endif /* CONFIG_W7OLMG */
-
-	/*
-	 * Initialize W7O environment variables
-	 */
-	w7o_env_init (&vpd);
-
-	/*
-	 * Initialize the FPGA(s).
-	 */
-	if (init_fpga () == 0)
-		test_fpga ((unsigned short *) CONFIG_FPGAS_BASE);
-
-	/* More POST testing. */
-	post2 ();
-
-	/* Done with hardware initialization and POST. */
-	log_stat (ERR_POSTOK);
-
-	/* Call silly, fail safe boot init routine */
-	init_fsboot ();
-
-	return (0);
-}

board/w7o/w7o.h

@@ -1,73 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _W7O_H_
-#define _W7O_H_
-#include <config.h>
-
-/* AMCC 405GP PowerPC GPIO registers */
-#define PPC405GP_GPIO0_OR	0xef600700L	/* GPIO Output */
-#define PPC405GP_GPIO0_TCR	0xef600704L	/* GPIO Three-State Control */
-#define PPC405GP_GPIO0_ODR	0xef600718L	/* GPIO Open Drain */
-#define PPC405GP_GPIO0_IR	0xef60071cL	/* GPIO Input */
-
-/* LMG FPGA <=> CPU GPIO signals */
-#define LMG_XCV_INIT		0x10000000L
-#define LMG_XCV_PROG		0x04000000L
-#define LMG_XCV_DONE		0x00400000L
-#define LMG_XCV_CNFG_0		0x08000000L
-#define LMG_XCV_IRQ_0		0x0L
-
-/* LMC FPGA <=> CPU GPIO signals */
-#define LMC_XCV_INIT		0x00800000L
-#define LMC_XCV_PROG		0x40000000L
-#define LMC_XCV_DONE		0x01000000L
-#define LMC_XCV_CNFG_0		0x00004000L	/* Shared with IRQ 0 */
-#define LMC_XCV_CNFG_1		0x00002000L	/* Shared with IRQ 1 */
-#define LMC_XCV_CNFG_2		0x00001000L	/* Shared with IRQ 2 */
-#define LMC_XCV_IRQ_0		0x00080000L	/* Shared with GPIO 17 */
-#define LMC_XCV_IRQ_1		0x00040000L	/* Shared with GPIO 18 */
-#define LMC_XCV_IRQ_3		0x00020000L	/* Shared tiwht GPIO 19 */
-
-
-/*
- * Setup FPGA <=> GPIO mappings
- */
-#if defined(CONFIG_W7OLMG)
-# define GPIO_XCV_INIT		LMG_XCV_INIT
-# define GPIO_XCV_PROG		LMG_XCV_PROG
-# define GPIO_XCV_DONE		LMG_XCV_DONE
-# define GPIO_XCV_CNFG		LMG_XCV_CNFG_0
-# define GPIO_XCV_IRQ		LMG_XCV_IRQ_0
-# define GPIO_GPIO_1		0x40000000L
-# define GPIO_GPIO_6		0x02000000L
-# define GPIO_GPIO_7		0x01000000L
-# define GPIO_GPIO_8		0x00800000L
-#elif defined(CONFIG_W7OLMC)
-# define GPIO_XCV_INIT		LMC_XCV_INIT
-# define GPIO_XCV_PROG		LMC_XCV_PROG
-# define GPIO_XCV_DONE		LMC_XCV_DONE
-# define GPIO_XCV_CNFG		LMC_XCV_CNFG_0
-# define GPIO_XCV_IRQ		LMC_XCV_IRQ_0
-#else
-# error "Unknown W7O board configuration"
-#endif
-
-/* Power On Self Tests */
-extern void post2(void);
-extern int test_led(void);
-extern int test_sdram(unsigned long size);
-extern void test_fpga(unsigned short *daddr);
-
-/* FGPA */
-extern int init_fpga(void);
-
-/* Misc */
-extern int temp_uart_init(void);
-extern void init_fsboot(void);
-
-#endif /* _W7O_H_ */

board/w7o/watchdog.c

@@ -1,31 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * W7O board level hardware watchdog.
- */
-#include <common.h>
-#include <config.h>
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-
-void hw_watchdog_reset(void)
-{
-    volatile ushort *hwd = (ushort *)(CONFIG_SYS_W7O_EBC_PB7CR & 0xfff00000);
-
-    /*
-     * Read the LMG's hwd register and toggle the
-     * watchdog bit to reset it.   On the LMC, just
-     * reading it is enough, but toggling the bit
-     * doen't hurt either.
-     */
-    *hwd = *hwd ^ 0x8000;
-
-} /* hw_watchdog_reset() */
-
-#endif /* CONFIG_HW_WATCHDOG */

configs/W7OLMC_defconfig

@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_W7OLMC=y

configs/W7OLMG_defconfig

@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_W7OLMG=y

doc/README.scrapyard

@@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+W7OLMC           powerpc     ppc4xx         -           -           Erik Theisen <etheisen@mindspring.com>
+W7OLMG           powerpc     ppc4xx         -           -           Erik Theisen <etheisen@mindspring.com>
 aev              powerpc     mpc5xxx        -           -
 TB5200           powerpc     mpc5xxx        -           -
 JSE              powerpc     ppc4xx         -           -           Stephen Williams <steve@icarus.com>

include/configs/W7OLMC.h

@@ -1,314 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405GP		1		/* This is a PPC405GP CPU	*/
-#define CONFIG_W7O		1		/* ...on a Wave 7 Optics board	*/
-#define CONFIG_W7OLMC		1		/* ...specifically an LMC	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f	*/
-#define	CONFIG_MISC_INIT_F	1		/* and misc_init_f()		*/
-#define	CONFIG_MISC_INIT_R	1		/* and misc_init_r()		*/
-
-#define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/
-
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3		/* autoboot after 3 seconds	*/
-
-#if 1
-#define CONFIG_BOOTCOMMAND	"bootvx"	/* VxWorks boot command		*/
-#else
-#define CONFIG_BOOTCOMMAND	"bootp"		/* autoboot command		*/
-#endif
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_LOADADDR		F0080000
-
-#define CONFIG_ETHADDR		00:06:0D:00:00:00 /* Default, overridden at boot	*/
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_IPADDR		192.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_SERVERIP		192.168.1.2
-
-#define CONFIG_LOADS_ECHO	1		/* echo on for serial download	*/
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII		1		/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		0		/* PHY address			*/
-
-#define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_REGINFO
-
-#undef CONFIG_WATCHDOG				/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG			/* HW Watchdog, board specific	*/
-
-#define	CONFIG_SPD_EEPROM			/* SPD EEPROM for SDRAM param.	*/
-#define CONFIG_SPDDRAM_SILENT			/* No output if spd fails	*/
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"Wave7Optics> " /* Monitor Command Prompt	*/
-#undef  CONFIG_SYS_HUSH_PARSER				/* No hush parse for U-Boot       */
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size	*/
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
-
-#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
-
-#undef  CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CONFIG_SYS_405_UART_ERRATA_59			/* 405GP/CR Rev. D silicon */
-#define CONFIG_SYS_BASE_BAUD		384000
-
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600}
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
-#define CONFIG_SYS_EXTBDINFO		1		/* use extended board_info (bd_t) */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER	0		/* configure as pci adapter	*/
-#define PCI_HOST_FORCE		1		/* configure as pci host	*/
-#define PCI_HOST_AUTO		2		/* detected via arbiter enable	*/
-
-
-#define CONFIG_PCI				/* include pci support		*/
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_HOST		PCI_HOST_AUTO	/* select pci host function	*/
-#define CONFIG_PCI_PNP				/* pci plug-and-play		*/
-/* resource configuration	*/
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014		/* PCI Vendor ID: IBM		*/
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0156		/* PCI Device ID: 405GP		*/
-#define CONFIG_SYS_PCI_PTM1LA		0x00000000	/* point to sdram		*/
-#define CONFIG_SYS_PCI_PTM1MS		0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CONFIG_SYS_PCI_PTM1PCI		0x00000000      /* Host: use this pci address   */
-#define CONFIG_SYS_PCI_PTM2LA		0x00000000	/* disabled			*/
-#define CONFIG_SYS_PCI_PTM2MS		0x00000000	/* disabled			*/
-#define CONFIG_SYS_PCI_PTM2PCI		0x00000000      /* Host: use this pci address   */
-
-/*-----------------------------------------------------------------------
- * Set up values for external bus controller
- * used by cpu_init.c
- *-----------------------------------------------------------------------
- */
- /* Don't use PerWE instead of PCI_INT ( these functions share a pin ) */
-#undef CONFIG_USE_PERWE
-
-/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CONFIG_SYS_TEMP_STACK_OCM        1
-
-/* bank 0 is boot flash */
-/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_W7O_EBC_PB0AP   0x03050440
-/* BAS=0xFFE,BS=0x1(2MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CONFIG_SYS_W7O_EBC_PB0CR   0xFFE38000
-
-/* bank 1 is main flash */
-/* BME=0,TWT=11,CSN=1,OEN=1,WBN=0,WBF=0,TH=1,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_EBC_PB1AP   0x05850240
-/* BAS=0xF00,BS=0x7(128MB),BU=0x3(R/W),BW=0x10(32 bits) */
-#define CONFIG_SYS_EBC_PB1CR   0xF00FC000
-
-/* bank 2 is RTC/NVRAM */
-/* BME=0,TWT=6,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_EBC_PB2AP   0x03000440
-/* BAS=0xFC0,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CONFIG_SYS_EBC_PB2CR   0xFC018000
-
-/* bank 3 is FPGA 0 */
-/* BME=0,TWT=4,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=0,PEN=0 */
-#define CONFIG_SYS_EBC_PB3AP   0x02000400
-/* BAS=0xFD0,BS=0x0(1MB),BU=0x3(R/W),BW=0x1(16 bits) */
-#define CONFIG_SYS_EBC_PB3CR   0xFD01A000
-
-/* bank 4 is FPGA 1 */
-/* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
-#define CONFIG_SYS_EBC_PB4AP   0x02000400
-/* BAS=,BS=,BU=0x3(R/W),BW=0x0(8 bits) */
-#define CONFIG_SYS_EBC_PB4CR   0xFD11A000
-
-/* bank 5 is FPGA 2 */
-/* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
-#define CONFIG_SYS_EBC_PB5AP   0x02000400
-/* BAS=,BS=,BU=0x3(R/W),BW=0x1(16 bits) */
-#define CONFIG_SYS_EBC_PB5CR   0xFD21A000
-
-/* bank 6 is unused */
-/* PB6AP = 0 */
-#define CONFIG_SYS_EBC_PB6AP   0x00000000
-/* PB6CR = 0 */
-#define CONFIG_SYS_EBC_PB6CR   0x00000000
-
-/* bank 7 is LED register */
-/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_W7O_EBC_PB7AP   0x03050440
-/* BAS=0xFE0,BS=0x0(1MB),BU=0x3(R/W),BW=0x2(32 bits) */
-#define CONFIG_SYS_W7O_EBC_PB7CR   0xFE01C000
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* max number of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max number of sec on 1 chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout, Flash Erase, in ms	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout, Flash Write, in ms	*/
-#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use real Flash protection	*/
-
-#if 1 /* Use NVRAM for environment variables */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_ENV_IS_IN_NVRAM	1		/* use NVRAM for env vars	*/
-#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfc000000	/* NVRAM base address		*/
-#define CONFIG_SYS_NVRAM_SIZE		(32*1024)	/* NVRAM size			*/
-#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-/*define CONFIG_ENV_ADDR		 \
-	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) Env  */
-#define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE_ADDR
-
-#else /* Use Boot Flash for environment variables */
-/*-----------------------------------------------------------------------
- * Flash EEPROM for environment
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE		0x10000		/* Total Size of env. sector	*/
-
-#define CONFIG_ENV_SECT_SIZE	0x10000		/* see README - env sec tot sze */
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC08) for environment
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
-					/* 16 byte page write mode using*/
-					/* last	4 bits of the address	*/
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS      0x50	/* XXX conflicting address!!! XXX */
-
-/*
- * Init Memory Controller:
- */
-#define FLASH_BASE0_PRELIM	0xFFE00000	/* FLASH bank #0		*/
-#define FLASH_BASE1_PRELIM	0xF0000000	/* FLASH bank #1		*/
-
-/* On Chip Memory location */
-#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
-#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in RAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#endif
-
-/*
- * FPGA(s) configuration
- */
-#define CONFIG_SYS_FPGA_IMAGE_LEN	0x80000		/* 512KB FPGA image		*/
-#define CONFIG_NUM_FPGAS	3		/* Number of FPGAs on board	*/
-#define CONFIG_MAX_FPGAS	6		/* Maximum number of FPGAs	*/
-#define CONFIG_FPGAS_BASE	0xFD000000L	/* Base address of FPGAs	*/
-#define CONFIG_FPGAS_BANK_SIZE	0x00100000L	/* FPGAs' mmap bank size	*/
-
-#endif	/* __CONFIG_H */

include/configs/W7OLMG.h

@@ -1,317 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405GP		1		/* This is a PPC405GP CPU	*/
-#define CONFIG_W7O		1		/* ...on a Wave 7 Optics board	*/
-#define CONFIG_W7OLMG		1		/* ...specifically an LMG	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f	*/
-#define	CONFIG_MISC_INIT_F	1		/* and misc_init_f()		*/
-#define	CONFIG_MISC_INIT_R	1		/* and misc_init_r()		*/
-
-#define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/
-
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3		/* autoboot after 3 seconds	*/
-
-#if 1
-#define CONFIG_BOOTCOMMAND	"bootvx"	/* VxWorks boot command		*/
-#else
-#define CONFIG_BOOTCOMMAND	"bootp"		/* autoboot command		*/
-#endif
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_LOADADDR		F0080000
-
-#define CONFIG_ETHADDR		00:06:0D:00:00:00 /* Default, overridden at boot	*/
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_IPADDR		192.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_SERVERIP		192.168.1.2
-
-#define CONFIG_LOADS_ECHO	1		/* echo on for serial download	*/
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII		1		/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		0		/* PHY address			*/
-
-#define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
-#define CONFIG_DTT_LM75     1                /* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS  {2, 4}           /* Sensor addresses */
-#define CONFIG_SYS_DTT_MAX_TEMP	70
-#define CONFIG_SYS_DTT_LOW_TEMP	-30
-#define CONFIG_SYS_DTT_HYSTERESIS	3
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DTT
-
-
-#undef CONFIG_WATCHDOG				/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG			/* HW Watchdog, board specific	*/
-
-#define	CONFIG_SPD_EEPROM			/* SPD EEPROM for SDRAM param.	*/
-#define CONFIG_SPDDRAM_SILENT			/* No output if spd fails	*/
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"Wave7Optics> " /* Monitor Command Prompt	*/
-#undef  CONFIG_SYS_HUSH_PARSER				/* No hush parse for U-Boot       */
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size	*/
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
-
-#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
-
-#undef  CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CONFIG_SYS_405_UART_ERRATA_59			/* 405GP/CR Rev. D silicon */
-#define CONFIG_SYS_BASE_BAUD		384000
-
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600}
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
-#define CONFIG_SYS_EXTBDINFO		1		/* use extended board_info (bd_t) */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER	0		/* configure as pci adapter	*/
-#define PCI_HOST_FORCE		1		/* configure as pci host	*/
-#define PCI_HOST_AUTO		2		/* detected via arbiter enable	*/
-
-#define CONFIG_PCI				/* include pci support		*/
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_HOST		PCI_HOST_AUTO	/* select pci host function	*/
-#define CONFIG_PCI_PNP				/* pci plug-and-play		*/
-/* resource configuration	*/
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014		/* PCI Vendor ID: IBM		*/
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0156		/* PCI Device ID: 405GP		*/
-#define CONFIG_SYS_PCI_PTM1LA		0x00000000	/* point to sdram		*/
-#define CONFIG_SYS_PCI_PTM1MS		0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CONFIG_SYS_PCI_PTM1PCI		0x00000000      /* Host: use this pci address   */
-#define CONFIG_SYS_PCI_PTM2LA		0x00000000	/* disabled			*/
-#define CONFIG_SYS_PCI_PTM2MS		0x00000000	/* disabled			*/
-#define CONFIG_SYS_PCI_PTM2PCI		0x00000000      /* Host: use this pci address   */
-
-/*-----------------------------------------------------------------------
- * Set up values for external bus controller
- * used by cpu_init.c
- *-----------------------------------------------------------------------
- */
- /* use PerWE instead of PCI_INT ( these functions share a pin ) */
-#define CONFIG_USE_PERWE 1
-
-/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CONFIG_SYS_TEMP_STACK_OCM        1
-
-/* bank 0 is boot flash */
-/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_W7O_EBC_PB0AP   0x03050440
-/* BAS=0xFFE,BS=0x1(2MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CONFIG_SYS_W7O_EBC_PB0CR   0xFFE38000
-
-/* bank 1 is main flash */
-/* BME=0,TWT=9,CSN=1,OEN=1,WBN=0,WBF=0,TH=1,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_EBC_PB1AP   0x04850240
-/* BAS=0xF00,BS=0x7(128MB),BU=0x3(R/W),BW=0x10(32 bits) */
-#define CONFIG_SYS_EBC_PB1CR   0xF00FC000
-
-/* bank 2 is RTC/NVRAM */
-/* BME=0,TWT=6,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_EBC_PB2AP   0x03000440
-/* BAS=0xFC0,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CONFIG_SYS_EBC_PB2CR   0xFC018000
-
-/* bank 3 is FPGA 0 */
-/* BME=0,TWT=4,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=0,PEN=0 */
-#define CONFIG_SYS_EBC_PB3AP   0x02000400
-/* BAS=0xFD0,BS=0x0(1MB),BU=0x3(R/W),BW=0x1(16 bits) */
-#define CONFIG_SYS_EBC_PB3CR   0xFD01A000
-
-/* bank 4 is SAM 8 bit range */
-/* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
-#define CONFIG_SYS_EBC_PB4AP   0x02840380
-/* BAS=,BS=,BU=0x3(R/W),BW=0x0(8 bits) */
-#define CONFIG_SYS_EBC_PB4CR   0xFE878000
-
-/* bank 5 is SAM 16 bit range */
-/* BME=0,TWT=10,CSN=2,OEN=0,WBN=0,WBF=0,TH=6,RE=1,SOR=1,BEM=0,PEN=0 */
-#define CONFIG_SYS_EBC_PB5AP   0x05040d80
-/* BAS=,BS=,BU=0x3(R/W),BW=0x1(16 bits) */
-#define CONFIG_SYS_EBC_PB5CR   0xFD87A000
-
-/* bank 6 is unused */
-/* PB6AP = 0 */
-#define CONFIG_SYS_EBC_PB6AP   0x00000000
-/* PB6CR = 0 */
-#define CONFIG_SYS_EBC_PB6CR   0x00000000
-
-/* bank 7 is LED register */
-/* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CONFIG_SYS_W7O_EBC_PB7AP   0x03050440
-/* BAS=0xFE0,BS=0x0(1MB),BU=0x3(R/W),BW=0x2(32 bits) */
-#define CONFIG_SYS_W7O_EBC_PB7CR   0xFE01C000
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* max number of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max number of sec on 1 chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout, Flash Erase, in ms	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout, Flash Write, in ms	*/
-#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use real Flash protection	*/
-
-#if 1 /* Use NVRAM for environment variables */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_ENV_IS_IN_NVRAM	1		/* use NVRAM for env vars	*/
-#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfc000000	/* NVRAM base address		*/
-#define CONFIG_SYS_NVRAM_SIZE		(32*1024)	/* NVRAM size			*/
-#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-/*define CONFIG_ENV_ADDR		 \
-	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) Env  */
-#define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE_ADDR
-
-#else /* Use Boot Flash for environment variables */
-/*-----------------------------------------------------------------------
- * Flash EEPROM for environment
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE		0x10000		/* Total Size of env. sector	*/
-
-#define CONFIG_ENV_SECT_SIZE	0x10000		/* see README - env sec tot sze */
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (ATMEL 24C04N)
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM ATMEL 24C04N		*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS      0x50	/* XXX conflicting address!!! XXX */
-
-/*
- * Init Memory Controller:
- */
-#define FLASH_BASE0_PRELIM	0xFFE00000	/* FLASH bank #0		*/
-#define FLASH_BASE1_PRELIM	0xF0000000	/* FLASH bank #1		*/
-
-/* On Chip Memory location */
-#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
-#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in RAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#endif
-
-/*
- * FPGA(s) configuration
- */
-#define CONFIG_SYS_FPGA_IMAGE_LEN	0x80000		/* 512KB FPGA image		*/
-#define CONFIG_NUM_FPGAS	1		/* Number of FPGAs on board	*/
-#define CONFIG_MAX_FPGAS	6		/* Maximum number of FPGAs	*/
-#define CONFIG_FPGAS_BASE	0xFD000000L	/* Base address of FPGAs	*/
-#define CONFIG_FPGAS_BANK_SIZE	0x00100000L	/* FPGAs' mmap bank size	*/
-
-#endif	/* __CONFIG_H */