Merge branch 'master' of git://git.denx.de/u-boot-uniphier

arch/arm/dts/Makefile

@@ -79,18 +79,18 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-xp-theadorable.dtb
 
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ph1-ld11-ref.dtb \
-	uniphier-ph1-ld20-ref.dtb \
-	uniphier-ph1-ld4-ref.dtb \
-	uniphier-ph1-ld6b-ref.dtb \
-	uniphier-ph1-pro4-ace.dtb \
-	uniphier-ph1-pro4-ref.dtb \
-	uniphier-ph1-pro4-sanji.dtb \
-	uniphier-ph1-pro5-4kbox.dtb \
-	uniphier-ph1-sld3-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb \
-	uniphier-proxstream2-gentil.dtb \
-	uniphier-proxstream2-vodka.dtb
+	uniphier-ld11-ref.dtb \
+	uniphier-ld20-ref.dtb \
+	uniphier-ld4-ref.dtb \
+	uniphier-ld6b-ref.dtb \
+	uniphier-pro4-ace.dtb \
+	uniphier-pro4-ref.dtb \
+	uniphier-pro4-sanji.dtb \
+	uniphier-pro5-4kbox.dtb \
+	uniphier-pxs2-gentil.dtb \
+	uniphier-pxs2-vodka.dtb \
+	uniphier-sld3-ref.dtb \
+	uniphier-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-zc706.dtb \
 	zynq-zed.dtb \

arch/arm/dts/uniphier-common32.dtsi

@@ -1,7 +1,8 @@
 /*
  * Device Tree Source commonly used by UniPhier ARM SoCs
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,6 +10,11 @@
 /include/ "skeleton.dtsi"
 
 / {
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			#clock-cells = <0>;

arch/arm/dts/uniphier-ph1-ld11-ref.dts → arch/arm/dts/uniphier-ld11-ref.dts

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for UniPhier PH1-LD11 Reference Board
+ * Device Tree Source for UniPhier LD11 Reference Board
  *
  * Copyright (C) 2016 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
@@ -8,12 +8,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld11.dtsi"
+/include/ "uniphier-ld11.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD11 Reference Board";
-	compatible = "socionext,ph1-ld11-ref", "socionext,ph1-ld11";
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
 
 	aliases {
 		serial0 = &serial0;

arch/arm/dts/uniphier-ph1-ld11.dtsi → arch/arm/dts/uniphier-ld11.dtsi

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for UniPhier PH1-LD11 SoC
+ * Device Tree Source for UniPhier LD11 SoC
  *
  * Copyright (C) 2016 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
@@ -10,7 +10,7 @@
 /memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
 
 / {
-	compatible = "socionext,ph1-ld11";
+	compatible = "socionext,uniphier-ld11";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
@@ -230,7 +230,9 @@
 			interrupts = <0 243 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&mio_clk 3>, <&mio_clk 6>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
 		};
 
 		usb1: usb@5a810100 {
@@ -240,7 +242,9 @@
 			interrupts = <0 244 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&mio_clk 4>, <&mio_clk 6>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
 		};
 
 		usb2: usb@5a820100 {
@@ -250,7 +254,9 @@
 			interrupts = <0 245 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
-			clocks = <&mio_clk 5>, <&mio_clk 6>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
 		};
 
 		mioctrl@5b3e0000 {

arch/arm/dts/uniphier-ph1-ld20-ref.dts → arch/arm/dts/uniphier-ld20-ref.dts

@@ -1,19 +1,20 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 Reference Board
+ * Device Tree Source for UniPhier LD20 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld20.dtsi"
+/include/ "uniphier-ld20.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD20 Reference Board";
-	compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20";
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
 
 	aliases {
 		serial0 = &serial0;

arch/arm/dts/uniphier-ph1-ld20.dtsi → arch/arm/dts/uniphier-ld20.dtsi

@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 SoC
+ * Device Tree Source for UniPhier LD20 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,7 +10,7 @@
 /memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
 
 / {
-	compatible = "socionext,ph1-ld20";
+	compatible = "socionext,uniphier-ld20";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
@@ -271,6 +272,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd>;
 			clocks = <&mio_clk 0>;
+			reset-names = "host";
+			resets = <&mio_rst 0>;
 			bus-width = <4>;
 		};
 

arch/arm/dts/uniphier-ph1-ld4-ref.dts → arch/arm/dts/uniphier-ld4-ref.dts

@@ -1,19 +1,20 @@
 /*
- * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ * Device Tree Source for UniPhier LD4 Reference Board
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-ld4.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD4 Reference Board";
-	compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+	model = "UniPhier LD4 Reference Board";
+	compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4";
 
 	memory {
 		device_type = "memory";

arch/arm/dts/uniphier-ph1-ld4.dtsi → arch/arm/dts/uniphier-ld4.dtsi

@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD4 SoC
+ * Device Tree Source for UniPhier LD4 SoC
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,7 +10,7 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-ld4";
+	compatible = "socionext,uniphier-ld4";
 
 	cpus {
 		#address-cells = <1>;
@@ -19,6 +20,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -223,6 +225,8 @@
 		pinctrl-0 = <&pinctrl_sd>;
 		pinctrl-1 = <&pinctrl_sd_1v8>;
 		clocks = <&mio_clk 0>;
+		reset-names = "host", "bridge";
+		resets = <&mio_rst 0>, <&mio_rst 3>;
 		bus-width = <4>;
 	};
 
@@ -235,6 +239,8 @@
 		pinctrl-0 = <&pinctrl_emmc>;
 		pinctrl-1 = <&pinctrl_emmc_1v8>;
 		clocks = <&mio_clk 1>;
+		reset-names = "host", "bridge", "hw-reset";
+		resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
 		bus-width = <8>;
 		non-removable;
 	};
@@ -246,7 +252,9 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
-		clocks = <&mio_clk 3>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+			 <&mio_rst 12>;
 	};
 
 	usb1: usb@5a810100 {
@@ -256,7 +264,9 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
-		clocks = <&mio_clk 4>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+			 <&mio_rst 13>;
 	};
 
 	usb2: usb@5a820100 {
@@ -266,7 +276,9 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 5>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+			 <&mio_rst 14>;
 	};
 
 	aidet@61830000 {

arch/arm/dts/uniphier-ph1-ld6b-ref.dts → arch/arm/dts/uniphier-ld6b-ref.dts

@@ -1,19 +1,20 @@
 /*
- * Device Tree Source for UniPhier PH1-LD6b Reference Board
+ * Device Tree Source for UniPhier LD6b Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld6b.dtsi"
+/include/ "uniphier-ld6b.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD6b Reference Board";
-	compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b";
+	model = "UniPhier LD6b Reference Board";
+	compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b";
 
 	memory {
 		device_type = "memory";

arch/arm/dts/uniphier-ld6b.dtsi

@@ -0,0 +1,32 @@
+/*
+ * Device Tree Source for UniPhier LD6b SoC
+ *
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	X11
+ */
+
+/*
+ * LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the PXs2 die.
+ * Reuse the PXs2 device tree with some properties overridden.
+ */
+/include/ "uniphier-pxs2.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-ld6b";
+};
+
+/* UART3 unavailable: the pads are not wired to the package balls */
+&serial3 {
+	status = "disabled";
+};
+
+/*
+ * LD6b and PXs2 have completely different packages,
+ * which makes the pinctrl driver unshareable.
+ */
+&pinctrl {
+	compatible = "socionext,uniphier-ld6b-pinctrl";
+};

arch/arm/dts/uniphier-ph1-ld6b.dtsi

@@ -1,31 +0,0 @@
-/*
- * Device Tree Source for UniPhier PH1-LD6b SoC
- *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+	X11
- */
-
-/*
- * PH1-LD6b consists of two silicon dies: D-chip and A-chip.
- * The D-chip (digital chip) is the same as the ProXstream2 die.
- * Reuse the ProXstream2 device tree with some properties overridden.
- */
-/include/ "uniphier-proxstream2.dtsi"
-
-/ {
-	compatible = "socionext,ph1-ld6b";
-};
-
-/* UART3 unavailable: the pads are not wired to the package balls */
-&serial3 {
-	status = "disabled";
-};
-
-/*
- * PH1-LD6b and ProXstream2 have completely different packages,
- * which makes the pinctrl driver unshareable.
- */
-&pinctrl {
-	compatible = "socionext,uniphier-ld6b-pinctrl";
-};

arch/arm/dts/uniphier-ph1-pro4-ace.dts → arch/arm/dts/uniphier-pro4-ace.dts

@@ -1,17 +1,18 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Ace Board
+ * Device Tree Source for UniPhier Pro4 Ace Board
  *
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Ace Board";
-	compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Ace Board";
+	compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
@@ -50,8 +51,8 @@
 &i2c0 {
 	status = "okay";
 
-	eeprom {
-		compatible = "24c64", "i2c-eeprom";
+	eeprom@54 {
+		compatible = "st,24c64", "i2c-eeprom";
 		reg = <0x54>;
 		u-boot,i2c-offset-len = <2>;
 	};

arch/arm/dts/uniphier-ph1-pro4-ref.dts → arch/arm/dts/uniphier-pro4-ref.dts

@@ -1,19 +1,20 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ * Device Tree Source for UniPhier Pro4 Reference Board
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Reference Board";
-	compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Reference Board";
+	compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";

arch/arm/dts/uniphier-ph1-pro4-sanji.dts → arch/arm/dts/uniphier-pro4-sanji.dts

@@ -1,17 +1,18 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Sanji Board
+ * Device Tree Source for UniPhier Pro4 Sanji Board
  *
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Sanji Board";
-	compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Sanji Board";
+	compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
@@ -45,8 +46,8 @@
 &i2c0 {
 	status = "okay";
 
-	eeprom {
-		compatible = "24c64", "i2c-eeprom";
+	eeprom@54 {
+		compatible = "st,24c64", "i2c-eeprom";
 		reg = <0x54>;
 		u-boot,i2c-offset-len = <2>;
 	};

arch/arm/dts/uniphier-ph1-pro4.dtsi → arch/arm/dts/uniphier-pro4.dtsi

@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 SoC
+ * Device Tree Source for UniPhier Pro4 SoC
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,17 +10,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-pro4";
+	compatible = "socionext,uniphier-pro4";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -27,6 +28,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -352,6 +354,8 @@
 		pinctrl-0 = <&pinctrl_sd>;
 		pinctrl-1 = <&pinctrl_sd_1v8>;
 		clocks = <&mio_clk 0>;
+		reset-names = "host", "bridge";
+		resets = <&mio_rst 0>, <&mio_rst 3>;
 		bus-width = <4>;
 	};
 
@@ -364,6 +368,8 @@
 		pinctrl-0 = <&pinctrl_emmc>;
 		pinctrl-1 = <&pinctrl_emmc_1v8>;
 		clocks = <&mio_clk 1>;
+		reset-names = "host", "bridge", "hw-reset";
+		resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
 		bus-width = <8>;
 		non-removable;
 	};
@@ -377,6 +383,7 @@
 		pinctrl-0 = <&pinctrl_sd1>;
 		pinctrl-1 = <&pinctrl_sd1_1v8>;
 		clocks = <&mio_clk 2>;
+		resets = <&mio_rst 2>, <&mio_rst 5>;
 		bus-width = <4>;
 	};
 
@@ -387,7 +394,9 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 3>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+			 <&mio_rst 12>;
 	};
 
 	usb3: usb@5a810100 {
@@ -397,7 +406,9 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb3>;
-		clocks = <&mio_clk 4>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+			 <&mio_rst 13>;
 	};
 
 	aidet@5fc20000 {

arch/arm/dts/uniphier-ph1-pro5-4kbox.dts → arch/arm/dts/uniphier-pro5-4kbox.dts

@@ -1,17 +1,18 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro5 4KBOX Board (EVB-Pro5-4KBOX-M-V0)
+ * Device Tree Source for UniPhier Pro5 4KBOX Board (EVB-Pro5-4KBOX-M-V0)
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro5.dtsi"
+/include/ "uniphier-pro5.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro5 4KBOX Board";
-	compatible = "socionext,ph1-pro5-4kbox", "socionext,ph1-pro5";
+	model = "UniPhier Pro5 4KBOX Board";
+	compatible = "socionext,uniphier-pro5-4kbox", "socionext,uniphier-pro5";
 
 	memory {
 		device_type = "memory";

arch/arm/dts/uniphier-ph1-pro5.dtsi → arch/arm/dts/uniphier-pro5.dtsi

@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro5 SoC
+ * Device Tree Source for UniPhier Pro5 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,17 +10,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-pro5";
+	compatible = "socionext,uniphier-pro5";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -27,6 +28,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -362,6 +364,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_emmc>;
 		clocks = <&mio_clk 1>;
+		reset-names = "host", "hw-reset";
+		resets = <&mio_rst 1>, <&mio_rst 6>;
 		bus-width = <8>;
 		non-removable;
 	};
@@ -375,6 +379,8 @@
 		pinctrl-0 = <&pinctrl_sd>;
 		pinctrl-1 = <&pinctrl_sd_1v8>;
 		clocks = <&mio_clk 0>;
+		reset-names = "host";
+		resets = <&mio_rst 0>;
 		bus-width = <4>;
 	};
 

arch/arm/dts/uniphier-proxstream2-gentil.dts → arch/arm/dts/uniphier-pxs2-gentil.dts

@@ -1,17 +1,19 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ * Device Tree Source for UniPhier PXs2 Gentil Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Gentil Board";
-	compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+	model = "UniPhier PXs2 Gentil Board";
+	compatible = "socionext,uniphier-pxs2-gentil",
+		     "socionext,uniphier-pxs2";
 
 	memory {
 		device_type = "memory";
@@ -41,8 +43,8 @@
 &i2c0 {
 	status = "okay";
 
-	eeprom {
-		compatible = "24c64", "i2c-eeprom";
+	eeprom@54 {
+		compatible = "st,24c64", "i2c-eeprom";
 		reg = <0x54>;
 		u-boot,i2c-offset-len = <2>;
 	};

arch/arm/dts/uniphier-proxstream2-vodka.dts → arch/arm/dts/uniphier-pxs2-vodka.dts

@@ -1,17 +1,18 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ * Device Tree Source for UniPhier PXs2 Vodka Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+	model = "UniPhier PXs2 Vodka Board";
+	compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2";
 
 	memory {
 		device_type = "memory";

arch/arm/dts/uniphier-proxstream2.dtsi → arch/arm/dts/uniphier-pxs2.dtsi

@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 SoC
+ * Device Tree Source for UniPhier PXs2 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,17 +10,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,proxstream2";
+	compatible = "socionext,uniphier-pxs2";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -27,6 +28,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -34,6 +36,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -41,6 +44,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -361,6 +365,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_emmc>;
 		clocks = <&mio_clk 1>;
+		reset-names = "host", "hw-reset";
+		resets = <&mio_rst 1>, <&mio_rst 6>;
 		bus-width = <8>;
 		non-removable;
 	};
@@ -374,6 +380,8 @@
 		pinctrl-0 = <&pinctrl_sd>;
 		pinctrl-1 = <&pinctrl_sd_1v8>;
 		clocks = <&mio_clk 0>;
+		reset-names = "host";
+		resets = <&mio_rst 0>;
 		bus-width = <4>;
 	};
 

arch/arm/dts/uniphier-ph1-sld3-ref.dts → arch/arm/dts/uniphier-sld3-ref.dts

@@ -1,19 +1,20 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ * Device Tree Source for UniPhier sLD3 Reference Board
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-sld3.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD3 Reference Board";
-	compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+	model = "UniPhier sLD3 Reference Board";
+	compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3";
 
 	memory {
 		device_type = "memory";

arch/arm/dts/uniphier-ph1-sld3.dtsi → arch/arm/dts/uniphier-sld3.dtsi

@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD3 SoC
+ * Device Tree Source for UniPhier sLD3 SoC
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,26 +10,34 @@
 /include/ "skeleton.dtsi"
 
 / {
-	compatible = "socionext,ph1-sld3";
+	compatible = "socionext,uniphier-sld3";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			#clock-cells = <0>;
@@ -79,6 +88,18 @@
 			      <0x20000100 0x100>;
 		};
 
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -280,6 +301,7 @@
 
 		system_bus: system-bus@58c00000 {
 			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
 			reg = <0x58c00000 0x400>;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -317,6 +339,7 @@
 			pinctrl-0 = <&pinctrl_emmc>;
 			pinctrl-1 = <&pinctrl_emmc_1v8>;
 			clocks = <&mio_clk 1>;
+			resets = <&mio_rst 1>, <&mio_rst 4>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -330,6 +353,7 @@
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_1v8>;
 			clocks = <&mio_clk 0>;
+			resets = <&mio_rst 0>, <&mio_rst 3>;
 			bus-width = <4>;
 		};
 
@@ -340,7 +364,9 @@
 			interrupts = <0 80 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&mio_clk 3>, <&mio_clk 6>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
 		};
 
 		usb1: usb@5a810100 {
@@ -350,7 +376,9 @@
 			interrupts = <0 81 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&mio_clk 4>, <&mio_clk 6>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
 		};
 
 		usb2: usb@5a820100 {
@@ -360,7 +388,9 @@
 			interrupts = <0 82 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
-			clocks = <&mio_clk 5>, <&mio_clk 6>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
 		};
 
 		usb3: usb@5a830100 {
@@ -370,7 +400,9 @@
 			interrupts = <0 83 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb3>;
-			clocks = <&mio_clk 7>, <&mio_clk 6>;
+			clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>,
+				 <&mio_rst 15>;
 		};
 
 		soc-glue@5f800000 {

arch/arm/dts/uniphier-ph1-sld8-ref.dts → arch/arm/dts/uniphier-sld8-ref.dts

@@ -1,19 +1,20 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ * Device Tree Source for UniPhier sLD8 Reference Board
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-sld8.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "UniPhier sLD8 Reference Board";
+	compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8";
 
 	memory {
 		device_type = "memory";

arch/arm/dts/uniphier-ph1-sld8.dtsi → arch/arm/dts/uniphier-sld8.dtsi

@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 SoC
+ * Device Tree Source for UniPhier sLD8 SoC
  *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
@@ -9,7 +10,7 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-sld8";
+	compatible = "socionext,uniphier-sld8";
 
 	cpus {
 		#address-cells = <1>;
@@ -19,6 +20,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -223,6 +225,8 @@
 		pinctrl-0 = <&pinctrl_sd>;
 		pinctrl-1 = <&pinctrl_sd_1v8>;
 		clocks = <&mio_clk 0>;
+		reset-names = "host", "bridge";
+		resets = <&mio_rst 0>, <&mio_rst 3>;
 		bus-width = <4>;
 	};
 
@@ -235,6 +239,8 @@
 		pinctrl-0 = <&pinctrl_emmc>;
 		pinctrl-1 = <&pinctrl_emmc_1v8>;
 		clocks = <&mio_clk 1>;
+		reset-names = "host", "bridge", "hw-reset";
+		resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
 		bus-width = <8>;
 		non-removable;
 	};
@@ -246,7 +252,9 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
-		clocks = <&mio_clk 3>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+			 <&mio_rst 12>;
 	};
 
 	usb1: usb@5a810100 {
@@ -256,7 +264,9 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
-		clocks = <&mio_clk 4>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+			 <&mio_rst 13>;
 	};
 
 	usb2: usb@5a820100 {
@@ -266,7 +276,9 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 5>, <&mio_clk 6>;
+		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+			 <&mio_rst 14>;
 	};
 
 	aidet@61830000 {

arch/arm/mach-uniphier/boards.c

@@ -250,35 +250,35 @@ struct uniphier_board_id {
 
 static const struct uniphier_board_id uniphier_boards[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_SLD3)
-	{ "socionext,ph1-sld3", &uniphier_sld3_data, },
+	{ "socionext,uniphier-sld3", &uniphier_sld3_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_LD4)
-	{ "socionext,ph1-ld4", &uniphier_ld4_data, },
+	{ "socionext,uniphier-ld4", &uniphier_ld4_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_PRO4)
-	{ "socionext,ph1-pro4-ace", &uniphier_pro4_2g_data, },
-	{ "socionext,ph1-pro4-sanji", &uniphier_pro4_2g_data, },
-	{ "socionext,ph1-pro4", &uniphier_pro4_data, },
+	{ "socionext,uniphier-pro4-ace", &uniphier_pro4_2g_data, },
+	{ "socionext,uniphier-pro4-sanji", &uniphier_pro4_2g_data, },
+	{ "socionext,uniphier-pro4", &uniphier_pro4_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_SLD8)
-	{ "socionext,ph1-sld8", &uniphier_sld8_data, },
+	{ "socionext,uniphier-sld8", &uniphier_sld8_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_PRO5)
-	{ "socionext,ph1-pro5", &uniphier_pro5_data, },
+	{ "socionext,uniphier-pro5", &uniphier_pro5_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_PXS2)
-	{ "socionext,proxstream2", &uniphier_pxs2_data, },
+	{ "socionext,uniphier-pxs2", &uniphier_pxs2_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_LD6B)
-	{ "socionext,ph1-ld6b", &uniphier_ld6b_data, },
+	{ "socionext,uniphier-ld6b", &uniphier_ld6b_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
-	{ "socionext,ph1-ld11", &uniphier_ld11_data, },
+	{ "socionext,uniphier-ld11", &uniphier_ld11_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_LD20)
-	{ "socionext,ph1-ld21", &uniphier_ld21_data, },
-	{ "socionext,ph1-ld20-ref", &uniphier_ld20_ref_data, },
-	{ "socionext,ph1-ld20", &uniphier_ld20_data, },
+	{ "socionext,uniphier-ld21", &uniphier_ld21_data, },
+	{ "socionext,uniphier-ld20-ref", &uniphier_ld20_ref_data, },
+	{ "socionext,uniphier-ld20", &uniphier_ld20_data, },
 #endif
 };
 

arch/arm/mach-uniphier/clk/clk-ld4.c

@@ -1,5 +1,7 @@
 /*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -18,9 +20,6 @@ void uniphier_ld4_clk_init(void)
 #ifdef CONFIG_UNIPHIER_ETH
 	tmp |= SC_RSTCTRL_NRST_ETHER;
 #endif
-#ifdef CONFIG_USB_EHCI
-	tmp |= SC_RSTCTRL_NRST_STDMAC;
-#endif
 #ifdef CONFIG_NAND_DENALI
 	tmp |= SC_RSTCTRL_NRST_NAND;
 #endif

arch/arm/mach-uniphier/clk/clk-pro4.c

@@ -1,5 +1,7 @@
 /*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -22,9 +24,6 @@ void uniphier_pro4_clk_init(void)
 #ifdef CONFIG_UNIPHIER_ETH
 	tmp |= SC_RSTCTRL_NRST_ETHER;
 #endif
-#ifdef CONFIG_USB_EHCI
-	tmp |= SC_RSTCTRL_NRST_STDMAC;
-#endif
 #ifdef CONFIG_NAND_DENALI
 	tmp |= SC_RSTCTRL_NRST_NAND;
 #endif

arch/arm/mach-uniphier/sc64-regs.h

@@ -63,9 +63,9 @@
 #define   SC_CLKCTRL7_UMC31		(1 << 1)
 #define   SC_CLKCTRL7_UMC30		(1 << 0)
 
-#define SC_CA72_GEARST		(SC_BASE_ADDR | 0x8080)
-#define SC_CA72_GEARSET		(SC_BASE_ADDR | 0x8084)
-#define SC_CA72_GEARUPD		(SC_BASE_ADDR | 0x8088)
+#define SC_CA72_GEARST		(SC_BASE_ADDR | 0x8000)
+#define SC_CA72_GEARSET		(SC_BASE_ADDR | 0x8004)
+#define SC_CA72_GEARUPD		(SC_BASE_ADDR | 0x8008)
 #define SC_CA53_GEARST		(SC_BASE_ADDR | 0x8080)
 #define SC_CA53_GEARSET		(SC_BASE_ADDR | 0x8084)
 #define SC_CA53_GEARUPD		(SC_BASE_ADDR | 0x8088)

configs/uniphier_ld11_defconfig

@@ -5,7 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_LD11=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld11-ref"
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld11-ref"
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_XIMG is not set

configs/uniphier_ld20_defconfig

@@ -5,7 +5,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_LD20=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld20-ref"
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_XIMG is not set

configs/uniphier_ld4_sld8_defconfig

@@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_LD4_SLD8=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref"
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld4-ref"
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

configs/uniphier_pro4_defconfig

@@ -6,7 +6,7 @@ CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-pro4-ref"
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

configs/uniphier_pxs2_ld6b_defconfig

@@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_PRO5_PXS2_LD6B=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-proxstream2-vodka"
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-pxs2-vodka"
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

configs/uniphier_sld3_defconfig

@@ -7,7 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_SLD3=y
 CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref"
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-sld3-ref"
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

doc/README.uniphier

@@ -2,74 +2,67 @@ U-Boot for UniPhier SoC family
 ==============================
 
 
-Tested toolchains
------------------
-
- (a) Ubuntu packages  (CROSS_COMPILE=arm-linux-gnueabi-)
-
-  If you are building U-Boot on Ubuntu, its standard package is recommended.
-  You can install it as follows:
+Recommended toolchains
+----------------------
 
-    $ sudo apt-get install gcc-arm-linux-gnueabi-
-
- (b) Linaro compilers  (CROSS_COMPILE=arm-linux-gnueabihf-)
-
-  You can download pre-built toolchains from:
+The UniPhir platform is well tested with Linaro toolchanis.
+You can download pre-built toolchains from:
 
     http://www.linaro.org/downloads/
 
- (c) kernel.org compilers  (CROSS_COMPILE=arm-unknown-linux-gnueabi-)
-
-  You can download pre-built toolchains from:
-
-    ftp://www.kernel.org/pub/tools/crosstool/files/bin/
-
 
 Compile the source
 ------------------
 
-PH1-sLD3 reference board:
+sLD3 reference board:
     $ make uniphier_sld3_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi-
+    $ make CROSS_COMPILE=arm-linux-gnueabihf-
 
-PH1-LD4 reference board:
+LD4 reference board:
     $ make uniphier_ld4_sld8_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi-
+    $ make CROSS_COMPILE=arm-linux-gnueabihf-
 
-PH1-sLD8 reference board:
+sLD8 reference board:
     $ make uniphier_ld4_sld8_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-sld8-ref
+    $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-sld8-ref
 
-PH1-Pro4 reference board:
+Pro4 reference board:
     $ make uniphier_pro4_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi-
+    $ make CROSS_COMPILE=arm-linux-gnueabihf-
 
-PH1-Pro4 Ace board:
+Pro4 Ace board:
     $ make uniphier_pro4_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro4-ace
+    $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro4-ace
 
-PH1-Pro4 Sanji board:
+Pro4 Sanji board:
     $ make uniphier_pro4_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro4-sanji
+    $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro4-sanji
 
-PH1-Pro5 4KBOX Board:
+Pro5 4KBOX Board:
     $ make uniphier_pxs2_ld6b_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro5-4kbox
+    $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro5-4kbox
 
-ProXstream2 Gentil board:
+PXs2 Gentil board:
     $ make uniphier_pxs2_ld6b_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-proxstream2-gentil
+    $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pxs2-gentil
 
-ProXstream2 Vodka board:
+PXs2 Vodka board:
     $ make uniphier_pxs2_ld6b_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi-
+    $ make CROSS_COMPILE=arm-linux-gnueabihf-
 
-PH1-LD6b reference board:
+LD6b reference board:
     $ make uniphier_pxs2_ld6b_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-ld6b-ref
+    $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-ld6b-ref
+
+LD11 reference board:
+    $ make uniphier_ld11_defconfig
+    $ make CROSS_COMPILE=aarch64-linux-gnu-
 
-You may wish to change the "CROSS_COMPILE=arm-linux-gnueabi-"
-to use your favorite compiler.
+LD20 reference board:
+    $ make uniphier_ld20_defconfig
+    $ make CROSS_COMPILE=aarch64-linux-gnu-
+
+You may wish to change the "CROSS_COMPILE=..." to use your favorite compiler.
 
 
 Burn U-Boot images to NAND
@@ -119,6 +112,9 @@ UniPhier specific commands
  - ddrphy (enabled by CONFIG_CMD_DDRPHY_DUMP)
      shows the DDR PHY parameters set by the PHY training
 
+ - ddrmphy (enabled by CONFIG_CMD_DDRMPHY_DUMP)
+     shows the DDR Multi PHY parameters set by the PHY training
+
 
 Supported devices
 -----------------
@@ -179,4 +175,4 @@ newer SoCs.  Even if it is, EA[25] is not connected on most of the boards.
 
 --
 Masahiro Yamada <yamada.masahiro@socionext.com>
-Feb. 2016
+Oct. 2016

drivers/clk/uniphier/Kconfig

@@ -1,13 +1,10 @@
 config CLK_UNIPHIER
-	bool
+	bool "Clock driver for UniPhier SoCs"
+	depends on ARCH_UNIPHIER
 	select CLK
 	select SPL_CLK
-
-menu "Clock drivers for UniPhier SoCs"
-	depends on CLK_UNIPHIER
-
-config CLK_UNIPHIER_MIO
-	bool "Clock driver for UniPhier Media I/O block"
 	default y
-
-endmenu
+	help
+	  Support for clock controllers on UniPhier SoCs.
+	  Say Y if you want to control clocks provided by System Control
+	  block, Media I/O block, Peripheral Block.

drivers/clk/uniphier/Makefile

@@ -1,3 +1,2 @@
-obj-y					+= clk-uniphier-core.o
-
-obj-$(CONFIG_CLK_UNIPHIER_MIO)		+= clk-uniphier-mio.o
+obj-y	+= clk-uniphier-core.o
+obj-y	+= clk-uniphier-mio.o

drivers/clk/uniphier/clk-uniphier-core.c

@@ -6,11 +6,11 @@
  */
 
 #include <common.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/sizes.h>
-#include <clk-uclass.h>
-#include <dm/device.h>
 
 #include "clk-uniphier.h"
 
@@ -18,136 +18,106 @@
  * struct uniphier_clk_priv - private data for UniPhier clock driver
  *
  * @base: base address of the clock provider
- * @socdata: SoC specific data
+ * @data: SoC specific data
  */
 struct uniphier_clk_priv {
 	void __iomem *base;
-	const struct uniphier_clk_soc_data *socdata;
+	const struct uniphier_clk_data *data;
 };
 
-int uniphier_clk_probe(struct udevice *dev)
+static int uniphier_clk_enable(struct clk *clk)
 {
-	struct uniphier_clk_priv *priv = dev_get_priv(dev);
-	fdt_addr_t addr;
+	struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
+	unsigned long id = clk->id;
+	const struct uniphier_clk_gate_data *p;
 
-	addr = dev_get_addr(dev->parent);
-	if (addr == FDT_ADDR_T_NONE)
-		return -EINVAL;
+	for (p = priv->data->gate; p->id != UNIPHIER_CLK_ID_END; p++) {
+		u32 val;
 
-	priv->base = devm_ioremap(dev, addr, SZ_4K);
-	if (!priv->base)
-		return -ENOMEM;
+		if (p->id != id)
+			continue;
 
-	priv->socdata = (void *)dev_get_driver_data(dev);
+		val = readl(priv->base + p->reg);
+		val |= BIT(p->bit);
+		writel(val, priv->base + p->reg);
 
-	return 0;
+		return 0;
+	}
+
+	dev_err(priv->dev, "clk_id=%lu was not handled\n", id);
+	return -EINVAL;
 }
 
-static int uniphier_clk_enable(struct clk *clk)
+static const struct uniphier_clk_mux_data *
+uniphier_clk_get_mux_data(struct uniphier_clk_priv *priv, unsigned long id)
 {
-	struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
-	const struct uniphier_clk_gate_data *gate = priv->socdata->gate;
-	unsigned int nr_gate = priv->socdata->nr_gate;
-	void __iomem *reg;
-	u32 mask, data, tmp;
-	int i;
-
-	for (i = 0; i < nr_gate; i++) {
-		if (gate[i].index != clk->id)
-			continue;
-
-		reg = priv->base + gate[i].reg;
-		mask = gate[i].mask;
-		data = gate[i].data & mask;
+	const struct uniphier_clk_mux_data *p;
 
-		tmp = readl(reg);
-		tmp &= ~mask;
-		tmp |= data & mask;
-		debug("%s: %p: %08x\n", __func__, reg, tmp);
-		writel(tmp, reg);
+	for (p = priv->data->mux; p->id != UNIPHIER_CLK_ID_END; p++) {
+		if (p->id == id)
+			return p;
 	}
 
-	return 0;
+	return NULL;
 }
 
 static ulong uniphier_clk_get_rate(struct clk *clk)
 {
 	struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
-	const struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
-	unsigned int nr_rdata = priv->socdata->nr_rate;
-	void __iomem *reg;
-	u32 mask, data;
-	ulong matched_rate = 0;
+	const struct uniphier_clk_mux_data *mux;
+	u32 val;
 	int i;
 
-	for (i = 0; i < nr_rdata; i++) {
-		if (rdata[i].index != clk->id)
-			continue;
+	mux = uniphier_clk_get_mux_data(priv, clk->id);
+	if (!mux)
+		return 0;
 
-		if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
-			return rdata[i].rate;
-
-		reg = priv->base + rdata[i].reg;
-		mask = rdata[i].mask;
-		data = rdata[i].data & mask;
-		if ((readl(reg) & mask) == data) {
-			if (matched_rate && rdata[i].rate != matched_rate) {
-				printf("failed to get clk rate for insane register values\n");
-				return -EINVAL;
-			}
-			matched_rate = rdata[i].rate;
-		}
-	}
+	if (!mux->nr_muxs)		/* fixed-rate */
+		return mux->rates[0];
+
+	val = readl(priv->base + mux->reg);
 
-	debug("%s: rate = %lu\n", __func__, matched_rate);
+	for (i = 0; i < mux->nr_muxs; i++)
+		if ((mux->masks[i] & val) == mux->vals[i])
+			return mux->rates[i];
 
-	return matched_rate;
+	return -EINVAL;
 }
 
 static ulong uniphier_clk_set_rate(struct clk *clk, ulong rate)
 {
 	struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
-	const struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
-	unsigned int nr_rdata = priv->socdata->nr_rate;
-	void __iomem *reg;
-	u32 mask, data, tmp;
+	const struct uniphier_clk_mux_data *mux;
+	u32 val;
+	int i, best_rate_id = -1;
 	ulong best_rate = 0;
-	int i;
 
-	/* first, decide the best match rate */
-	for (i = 0; i < nr_rdata; i++) {
-		if (rdata[i].index != clk->id)
-			continue;
+	mux = uniphier_clk_get_mux_data(priv, clk->id);
+	if (!mux)
+		return 0;
 
-		if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
-			return 0;
+	if (!mux->nr_muxs)		/* fixed-rate */
+		return mux->rates[0];
 
-		if (rdata[i].rate > best_rate && rdata[i].rate <= rate)
-			best_rate = rdata[i].rate;
+	/* first, decide the best match rate */
+	for (i = 0; i < mux->nr_muxs; i++) {
+		if (mux->rates[i] > best_rate && mux->rates[i] <= rate) {
+			best_rate = mux->rates[i];
+			best_rate_id = i;
+		}
 	}
 
-	if (!best_rate)
-		return -ENODEV;
+	if (best_rate_id < 0)
+		return -EINVAL;
+
+	val = readl(priv->base + mux->reg);
+	val &= ~mux->masks[best_rate_id];
+	val |= mux->vals[best_rate_id];
+	writel(val, priv->base + mux->reg);
 
 	debug("%s: requested rate = %lu, set rate = %lu\n", __func__,
 	      rate, best_rate);
 
-	/* second, really set registers */
-	for (i = 0; i < nr_rdata; i++) {
-		if (rdata[i].index != clk->id || rdata[i].rate != best_rate)
-			continue;
-
-		reg = priv->base + rdata[i].reg;
-		mask = rdata[i].mask;
-		data = rdata[i].data & mask;
-
-		tmp = readl(reg);
-		tmp &= ~mask;
-		tmp |= data;
-		debug("%s: %p: %08x\n", __func__, reg, tmp);
-		writel(tmp, reg);
-	}
-
 	return best_rate;
 }
 
@@ -157,6 +127,24 @@ const struct clk_ops uniphier_clk_ops = {
 	.set_rate = uniphier_clk_set_rate,
 };
 
+static int uniphier_clk_probe(struct udevice *dev)
+{
+	struct uniphier_clk_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+
+	addr = dev_get_addr(dev->parent);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->base = devm_ioremap(dev, addr, SZ_4K);
+	if (!priv->base)
+		return -ENOMEM;
+
+	priv->data = (void *)dev_get_driver_data(dev);
+
+	return 0;
+}
+
 static const struct udevice_id uniphier_clk_match[] = {
 	{
 		.compatible = "socionext,uniphier-sld3-mio-clock",

drivers/clk/uniphier/clk-uniphier-mio.c

@@ -5,136 +5,81 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#include <dm/device.h>
-
 #include "clk-uniphier.h"
 
-#define UNIPHIER_MIO_CLK_GATE_SD(ch, idx)	\
-	{					\
-		.index = (idx),			\
-		.reg = 0x20 + 0x200 * (ch),	\
-		.mask = 0x00000100,		\
-		.data = 0x00000100,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x110 + 0x200 * (ch),	\
-		.mask = 0x00000001,		\
-		.data = 0x00000001,		\
-	}
+#define UNIPHIER_MIO_CLK_SD_GATE(id, ch)				\
+	UNIPHIER_CLK_GATE((id), 0x20 + 0x200 * (ch), 8)
 
-#define UNIPHIER_MIO_CLK_RATE_SD(ch, idx)	\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00000000,		\
-		.rate = 44444444,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00010000,		\
-		.rate = 33333333,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00020000,		\
-		.rate = 50000000,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00020000,		\
-		.rate = 66666666,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00001000,		\
-		.rate = 100000000,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00001100,		\
-		.rate = 40000000,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00001200,		\
-		.rate = 25000000,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x30 + 0x200 * (ch),	\
-		.mask = 0x00031300,		\
-		.data = 0x00001300,		\
-		.rate = 22222222,		\
-	}
+#define UNIPHIER_MIO_CLK_USB2(id, ch)					\
+	UNIPHIER_CLK_GATE((id), 0x20 + 0x200 * (ch), 28)
 
-#define UNIPHIER_MIO_CLK_GATE_USB(ch, idx)	\
-	{					\
-		.index = (idx),			\
-		.reg = 0x20 + 0x200 * (ch),	\
-		.mask = 0x30000000,		\
-		.data = 0x30000000,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x110 + 0x200 * (ch),	\
-		.mask = 0x01000000,		\
-		.data = 0x01000000,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x114 + 0x200 * (ch),	\
-		.mask = 0x00000001,		\
-		.data = 0x00000001,		\
-	}
+#define UNIPHIER_MIO_CLK_USB2_PHY(id, ch)				\
+	UNIPHIER_CLK_GATE((id), 0x20 + 0x200 * (ch), 29)
+
+#define UNIPHIER_MIO_CLK_DMAC(id)					\
+	UNIPHIER_CLK_GATE((id), 0x20, 25)
 
-#define UNIPHIER_MIO_CLK_GATE_DMAC(idx)		\
-	{					\
-		.index = (idx),			\
-		.reg = 0x20,			\
-		.mask = 0x02000000,		\
-		.data = 0x02000000,		\
-	},					\
-	{					\
-		.index = (idx),			\
-		.reg = 0x110,			\
-		.mask = 0x00020000,		\
-		.data = 0x00020000,		\
+#define UNIPHIER_MIO_CLK_SD_MUX(_id, ch)				\
+	{								\
+		.id = (_id),						\
+		.nr_muxs = 8,						\
+		.reg = 0x30 + 0x200 * (ch),				\
+		.masks = {						\
+			0x00031000,					\
+			0x00031000,					\
+			0x00031000,					\
+			0x00031000,					\
+			0x00001300,					\
+			0x00001300,					\
+			0x00001300,					\
+			0x00001300,					\
+		},							\
+		.vals = {						\
+			0x00000000,					\
+			0x00010000,					\
+			0x00020000,					\
+			0x00030000,					\
+			0x00001000,					\
+			0x00001100,					\
+			0x00001200,					\
+			0x00001300,					\
+		},							\
+		.rates = {						\
+			44444444,					\
+			33333333,					\
+			50000000,					\
+			66666666,					\
+			100000000,					\
+			40000000,					\
+			25000000,					\
+			22222222,					\
+		},							\
 	}
 
 static const struct uniphier_clk_gate_data uniphier_mio_clk_gate[] = {
-	UNIPHIER_MIO_CLK_GATE_SD(0, 0),
-	UNIPHIER_MIO_CLK_GATE_SD(1, 1),
-	UNIPHIER_MIO_CLK_GATE_SD(2, 2),		/* for PH1-Pro4 only */
-	UNIPHIER_MIO_CLK_GATE_USB(0, 3),
-	UNIPHIER_MIO_CLK_GATE_USB(1, 4),
-	UNIPHIER_MIO_CLK_GATE_USB(2, 5),
-	UNIPHIER_MIO_CLK_GATE_DMAC(6),
-	UNIPHIER_MIO_CLK_GATE_USB(3, 7),	/* for PH1-sLD3 only */
+	UNIPHIER_MIO_CLK_SD_GATE(0, 0),
+	UNIPHIER_MIO_CLK_SD_GATE(1, 1),
+	UNIPHIER_MIO_CLK_SD_GATE(2, 2),		/* for PH1-Pro4 only */
+	UNIPHIER_MIO_CLK_DMAC(7),
+	UNIPHIER_MIO_CLK_USB2(8, 0),
+	UNIPHIER_MIO_CLK_USB2(9, 1),
+	UNIPHIER_MIO_CLK_USB2(10, 2),
+	UNIPHIER_MIO_CLK_USB2(11, 3),		/* for PH1-sLD3 only */
+	UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
+	UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
+	UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
+	UNIPHIER_MIO_CLK_USB2_PHY(15, 3),	/* for PH1-sLD3 only */
+	UNIPHIER_CLK_END
 };
 
-static const struct uniphier_clk_rate_data uniphier_mio_clk_rate[] = {
-	UNIPHIER_MIO_CLK_RATE_SD(0, 0),
-	UNIPHIER_MIO_CLK_RATE_SD(1, 1),
-	UNIPHIER_MIO_CLK_RATE_SD(2, 2),		/* for PH1-Pro4 only */
+static const struct uniphier_clk_mux_data uniphier_mio_clk_mux[] = {
+	UNIPHIER_MIO_CLK_SD_MUX(0, 0),
+	UNIPHIER_MIO_CLK_SD_MUX(1, 1),
+	UNIPHIER_MIO_CLK_SD_MUX(2, 2),		/* for PH1-Pro4 only */
+	UNIPHIER_CLK_END
 };
 
-const struct uniphier_clk_soc_data uniphier_mio_clk_data = {
+const struct uniphier_clk_data uniphier_mio_clk_data = {
 	.gate = uniphier_mio_clk_gate,
-	.nr_gate = ARRAY_SIZE(uniphier_mio_clk_gate),
-	.rate = uniphier_mio_clk_rate,
-	.nr_rate = ARRAY_SIZE(uniphier_mio_clk_rate),
+	.mux = uniphier_mio_clk_mux,
 };

drivers/clk/uniphier/clk-uniphier.h

@@ -10,36 +10,46 @@
 
 #include <linux/kernel.h>
 
+#define UNIPHIER_CLK_MAX_NR_MUXS	8
+
 struct uniphier_clk_gate_data {
-	int index;
+	unsigned int id;
 	unsigned int reg;
-	u32 mask;
-	u32 data;
+	unsigned int bit;
 };
 
-struct uniphier_clk_rate_data {
-	int index;
+struct uniphier_clk_mux_data {
+	unsigned int id;
+	unsigned int nr_muxs;
 	unsigned int reg;
-#define UNIPHIER_CLK_RATE_IS_FIXED		UINT_MAX
-	u32 mask;
-	u32 data;
-	unsigned long rate;
+	unsigned int masks[UNIPHIER_CLK_MAX_NR_MUXS];
+	unsigned int vals[UNIPHIER_CLK_MAX_NR_MUXS];
+	unsigned long rates[UNIPHIER_CLK_MAX_NR_MUXS];
 };
 
-struct uniphier_clk_soc_data {
+struct uniphier_clk_data {
 	const struct uniphier_clk_gate_data *gate;
-	unsigned int nr_gate;
-	const struct uniphier_clk_rate_data *rate;
-	unsigned int nr_rate;
+	const struct uniphier_clk_mux_data *mux;
 };
 
-#define UNIPHIER_CLK_FIXED_RATE(i, f)			\
+#define UNIPHIER_CLK_ID_END		(unsigned int)(-1)
+
+#define UNIPHIER_CLK_END				\
+	{ .id = UNIPHIER_CLK_ID_END }
+
+#define UNIPHIER_CLK_GATE(_id, _reg, _bit)		\
+	{						\
+		.id = (_id),				\
+		.reg = (_reg),				\
+		.bit = (_bit),				\
+	}
+
+#define UNIPHIER_CLK_FIXED_RATE(_id, _rate)		\
 	{						\
-		.index = i,				\
-		.reg = UNIPHIER_CLK_RATE_IS_FIXED,	\
-		.rate = f,				\
+		.id = (_id),				\
+		.rates = {(_reg),},			\
 	}
 
-extern const struct uniphier_clk_soc_data uniphier_mio_clk_data;
+extern const struct uniphier_clk_data uniphier_mio_clk_data;
 
 #endif /* __CLK_UNIPHIER_H__ */

drivers/pinctrl/uniphier/pinctrl-uniphier.h

@@ -91,7 +91,12 @@ struct uniphier_pinctrl_socdata {
 #define __UNIPHIER_PINMUX_FUNCTION(func)	#func
 
 #ifdef CONFIG_SPL_BUILD
-#define UNIPHIER_PINCTRL_GROUP(grp)		{ .name = NULL }
+	/*
+	 * a tricky way to drop unneeded *_pins and *_muxvals arrays from SPL,
+	 * suppressing "defined but not used" warnings.
+	 */
+#define UNIPHIER_PINCTRL_GROUP(grp)					\
+	{ .num_pins = ARRAY_SIZE(grp##_pins) + ARRAY_SIZE(grp##_muxvals) }
 #define UNIPHIER_PINMUX_FUNCTION(func)		NULL
 #else
 #define UNIPHIER_PINCTRL_GROUP(grp)		__UNIPHIER_PINCTRL_GROUP(grp)

include/configs/uniphier.h

@@ -126,7 +126,6 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS			0
 
 /* USB */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	4
 #define CONFIG_FAT_WRITE
 #define CONFIG_DOS_PARTITION