ddr: marvell: update ddr controller init and freq

Update the calculation for tWR and tPD. This improves the DDR refresh
interval and brings the initialization into line with the binary blobs
currently being supplied by Marvell.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

drivers/ddr/marvell/a38x/ddr3_topology_def.h

@@ -70,7 +70,8 @@ enum speed_bin_table_elements {
 	SPEED_BIN_TWTR,
 	SPEED_BIN_TRTP,
 	SPEED_BIN_TWR,
-	SPEED_BIN_TMOD
+	SPEED_BIN_TMOD,
+	SPEED_BIN_TXPDLL
 };
 
 #endif /* _DDR3_TOPOLOGY_DEF_H */

drivers/ddr/marvell/a38x/ddr3_training.c

@@ -22,6 +22,8 @@
 #define GET_CS_FROM_MASK(mask)	(cs_mask2_num[mask])
 #define CS_CBE_VALUE(cs_num)	(cs_cbe_reg[cs_num])
 
+#define TIMES_9_TREFI_CYCLES	0x8
+
 u32 window_mem_addr = 0;
 u32 phy_reg0_val = 0;
 u32 phy_reg1_val = 8;
@@ -508,7 +510,9 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_
 				DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE,
 						  ("cl_value 0x%x cwl_val 0x%x\n",
 						   cl_value, cwl_val));
-
+				t_wr = TIME_2_CLOCK_CYCLES(speed_bin_table(speed_bin_index,
+									   SPEED_BIN_TWR),
+							   t_ckclk);
 				data_value =
 					((cl_mask_table[cl_value] & 0x1) << 2) |
 					((cl_mask_table[cl_value] & 0xe) << 3);
@@ -518,8 +522,9 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_
 					      (0x7 << 4) | (1 << 2)));
 				CHECK_STATUS(ddr3_tip_if_write
 					     (dev_num, access_type, if_id,
-					      MR0_REG, twr_mask_table[t_wr + 1],
-					      0xe00));
+					      MR0_REG, twr_mask_table[t_wr + 1] << 9,
+					      (0x7 << 9)));
+
 
 				/*
 				 * MR1: Set RTT and DIC Design GL values
@@ -590,16 +595,15 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_
 				      DDR_CONTROL_LOW_REG, t2t << 3,
 				      0x3 << 3));
 			/* move the block to ddr3_tip_set_timing - start */
-			t_pd = GET_MAX_VALUE(t_ckclk * 3,
-					     speed_bin_table(speed_bin_index,
-							     SPEED_BIN_TPD));
-			t_pd = TIME_2_CLOCK_CYCLES(t_pd, t_ckclk);
-			txpdll = GET_MAX_VALUE(t_ckclk * 10, 24);
+			t_pd = TIMES_9_TREFI_CYCLES;
+			txpdll = GET_MAX_VALUE(t_ckclk * 10,
+					       speed_bin_table(speed_bin_index,
+							       SPEED_BIN_TXPDLL));
 			txpdll = CEIL_DIVIDE((txpdll - 1), t_ckclk);
 			CHECK_STATUS(ddr3_tip_if_write
 				     (dev_num, access_type, if_id,
-				      DDR_TIMING_REG, txpdll << 4,
-				      0x1f << 4));
+				      DDR_TIMING_REG, txpdll << 4 | t_pd,
+				      0x1f << 4 | 0xf));
 			CHECK_STATUS(ddr3_tip_if_write
 				     (dev_num, access_type, if_id,
 				      DDR_TIMING_REG, 0x28 << 9, 0x3f << 9));
@@ -1227,6 +1231,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type,
 	u32 cl_value = 0, cwl_value = 0, mem_mask = 0, val = 0,
 		bus_cnt = 0, t_hclk = 0, t_wr = 0,
 		refresh_interval_cnt = 0, cnt_id;
+	u32 t_ckclk;
 	u32 t_refi = 0, end_if, start_if;
 	u32 bus_index = 0;
 	int is_dll_off = 0;
@@ -1393,8 +1398,12 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type,
 		CHECK_STATUS(ddr3_tip_if_write
 			     (dev_num, access_type, if_id, DFS_REG,
 			      (cwl_mask_table[cwl_value] << 12), 0x7000));
-		t_wr = speed_bin_table(speed_bin_index, SPEED_BIN_TWR);
-		t_wr = (t_wr / 1000);
+
+		t_ckclk = MEGA / freq_val[frequency];
+		t_wr = TIME_2_CLOCK_CYCLES(speed_bin_table(speed_bin_index,
+							   SPEED_BIN_TWR),
+					   t_ckclk);
+
 		CHECK_STATUS(ddr3_tip_if_write
 			     (dev_num, access_type, if_id, DFS_REG,
 			      (twr_mask_table[t_wr + 1] << 16), 0x70000));

drivers/ddr/marvell/a38x/ddr3_training_db.c

@@ -152,18 +152,18 @@ u8 twr_mask_table[] = {
 	10,
 	10,
 	10,
-	1,			/*5 */
-	2,			/*6 */
-	3,			/*7 */
+	1,			/*5*/
+	2,			/*6*/
+	3,			/*7*/
+	4,			/*8*/
 	10,
+	5,			/*10*/
 	10,
-	5,			/*10 */
+	6,			/*12*/
 	10,
-	6,			/*12 */
+	7,			/*14*/
 	10,
-	7,			/*14 */
-	10,
-	0			/*16 */
+	0			/*16*/
 };
 
 u8 cl_mask_table[] = {
@@ -431,6 +431,9 @@ u32 speed_bin_table(u8 index, enum speed_bin_table_elements element)
 	case SPEED_BIN_TMOD:
 		result = 15000;
 		break;
+	case SPEED_BIN_TXPDLL:
+		result = 24000;
+		break;
 	default:
 		break;
 	}