mx5 clocks: Add and use CCSR definitions

This fixes config_pll_clk(), which used 0x20 instead of 0x200 for PLL4_CLOCK.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>

arch/arm/cpu/armv7/mx5/clock.c

@@ -36,7 +36,9 @@ enum pll_clocks {
 	PLL1_CLOCK = 0,
 	PLL2_CLOCK,
 	PLL3_CLOCK,
+#ifdef CONFIG_MX53
 	PLL4_CLOCK,
+#endif
 	PLL_CLOCKS,
 };
 
@@ -323,10 +325,10 @@ static u32 get_lp_apm(void)
 	u32 ret_val = 0;
 	u32 ccsr = readl(&mxc_ccm->ccsr);
 
-	if (((ccsr >> 9) & 1) == 0)
-		ret_val = MXC_HCLK;
-	else
+	if (ccsr & MXC_CCM_CCSR_LP_APM)
 		ret_val = MXC_CLK32 * 1024;
+	else
+		ret_val = MXC_HCLK;
 
 	return ret_val;
 }
@@ -593,40 +595,50 @@ static int config_pll_clk(enum pll_clocks index, struct pll_param *pll_param)
 	switch (index) {
 	case PLL1_CLOCK:
 		/* Switch ARM to PLL2 clock */
-		writel(ccsr | 0x4, &mxc_ccm->ccsr);
+		writel(ccsr | MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		writel(ccsr & ~0x4, &mxc_ccm->ccsr);
+		writel(ccsr & ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
 	case PLL2_CLOCK:
 		/* Switch to pll2 bypass clock */
-		writel(ccsr | 0x2, &mxc_ccm->ccsr);
+		writel(ccsr | MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		writel(ccsr & ~0x2, &mxc_ccm->ccsr);
+		writel(ccsr & ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
 	case PLL3_CLOCK:
 		/* Switch to pll3 bypass clock */
-		writel(ccsr | 0x1, &mxc_ccm->ccsr);
+		writel(ccsr | MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		writel(ccsr & ~0x1, &mxc_ccm->ccsr);
+		writel(ccsr & ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
+#ifdef CONFIG_MX53
 	case PLL4_CLOCK:
 		/* Switch to pll4 bypass clock */
-		writel(ccsr | 0x20, &mxc_ccm->ccsr);
+		writel(ccsr | MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		writel(ccsr & ~0x20, &mxc_ccm->ccsr);
+		writel(ccsr & ~MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
+#endif
 	default:
 		return -EINVAL;
 	}

arch/arm/include/asm/arch-mx5/crm_regs.h

@@ -82,6 +82,29 @@ struct mxc_ccm_reg {
 	u32 cmeor;
 };
 
+/* Define the bits in register CCSR */
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCSR_LP_APM			(0x1 << 9)
+#elif defined(CONFIG_MX53)
+#define MXC_CCM_CCSR_LP_APM			(0x1 << 10)
+#define MXC_CCM_CCSR_PLL4_SW_CLK_SEL		(0x1 << 9)
+#endif
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET		7
+#define MXC_CCM_CCSR_STEP_SEL_MASK		(0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL(v)		(((v) & 0x3) << 7)
+#define MXC_CCM_CCSR_STEP_SEL_RD(r)		(((r) >> 7) & 0x3)
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_OFFSET	5
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_MASK		(0x3 << 5)
+#define MXC_CCM_CCSR_PLL2_DIV_PODF(v)		(((v) & 0x3) << 5)
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_RD(r)	(((r) >> 5) & 0x3)
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_OFFSET	3
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_MASK		(0x3 << 3)
+#define MXC_CCM_CCSR_PLL3_DIV_PODF(v)		(((v) & 0x3) << 3)
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_RD(r)	(((r) >> 3) & 0x3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL		(0x1 << 2)
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL		0x1
+
 /* Define the bits in register CACRR */
 #define MXC_CCM_CACRR_ARM_PODF_OFFSET		0
 #define MXC_CCM_CACRR_ARM_PODF_MASK		0x7