configs: sama5d2_xplained: update for SPL

Enable config options to support the SPL, increase the malloc
memory size for the SPL and board_init_f stage and increase
the memory space for the SPL binary.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>

configs/sama5d2_xplained_mmc_defconfig

@@ -8,12 +8,15 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
+CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
@@ -30,8 +33,10 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_DM=y
 CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_AT91=y
@@ -51,12 +56,13 @@ CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
-CONFIG_DEBUG_UART_CLOCK=0
+CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y

configs/sama5d2_xplained_spiflash_defconfig

@@ -4,9 +4,11 @@ CONFIG_TARGET_SAMA5D2_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH"
@@ -29,8 +31,10 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_DM=y
 CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_AT91=y
@@ -50,12 +54,13 @@ CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
-CONFIG_DEBUG_UART_CLOCK=0
+CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y

include/configs/sama5d2_xplained.h

@@ -20,10 +20,10 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x210000
+#define CONFIG_SYS_INIT_SP_ADDR		0x218000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
@@ -73,7 +73,7 @@
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x200000
-#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_MAX_SIZE		0x18000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
@@ -89,7 +89,7 @@
 
 #elif CONFIG_SYS_USE_SERIALFLASH
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 
 #endif