Browse Source

OMAP3 pandora: setup pin mux for pins used on rev3 boards

Setup pin mux for GPIO pins connected on rev3 or later
boards. Also change NUB2 IRQ pin. This should not affect
older boards because they don't have any nubs (analog
controllers) attached to them.
Grazvydas Ignotas 16 years ago
parent
commit
5ff78122f2
1 changed files with 10 additions and 1 deletions
  1. 10 1
      board/omap3/pandora/pandora.h

+ 10 - 1
board/omap3/pandora/pandora.h

@@ -242,13 +242,15 @@ const omap3_sysinfo sysinfo = {
 							 /* - WIFI_IRQ*/\
  MUX_VAL(CP(MCBSP1_FSX),	(IEN  | PTD | DIS | M4)) /*GPIO_161*/\
 							 /* - nIRQ_NUB1*/\
- MUX_VAL(CP(CAM_WEN),		(IEN  | PTU | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTU | DIS | M4)) /*GPIO_162*/\
 							 /* - nIRQ_NUB2*/\
  /*Various other stuff*/\
  MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | DIS | M4)) /*GPIO_163*/\
 							 /* - nOC_USB5*/\
  MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_22*/\
 							 /* - MSECURE*/\
+ MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M4)) /*GPIO_115*/\
+							 /* - POP_OVERHEAT*/\
  /*External Resets and Enables*/\
  MUX_VAL(CP(ETK_D0_ES2),	(IDIS | PTD | DIS | M4)) /*GPIO_14*/\
 							 /* - nHDPHN_SHUTDOWN*/\
@@ -262,6 +264,13 @@ const omap3_sysinfo sysinfo = {
 							 /* - RESET_NUBS*/\
  MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTU | EN  | M4)) /*GPIO_164*/\
 							 /* - EN_USB_5V*/\
+ /*Spare GPIOs*/\
+ MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTD | EN  | M4)) /*GPIO_58*/\
+ MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTD | EN  | M4)) /*GPIO_64*/\
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTD | EN  | M4)) /*GPIO_65*/\
+ MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M4)) /*GPIO_95*/\
+ MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | EN  | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(HDQ_SIO),		(IEN  | PTD | EN  | M4)) /*GPIO_170*/\
  /*HS USB OTG Port (connects to HSUSB0)*/\
  MUX_VAL(CP(HSUSB0_CLK),	(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
  MUX_VAL(CP(HSUSB0_STP),	(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\