powerpc: T1023: Remove macro CONFIG_PPC_T1023

Replace CONFIG_PPC_T1023 with ARCH_T1023 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -196,6 +196,7 @@ config TARGET_T102XQDS
 
 config TARGET_T1023RDB
 	bool "Support T1023RDB"
+	select ARCH_T1023
 	select SUPPORT_SPL
 	select PHYS_64BIT
 
@@ -354,6 +355,9 @@ config ARCH_P5040
 config ARCH_QEMU_E500
 	bool
 
+config ARCH_T1023
+	bool
+
 source "board/freescale/b4860qds/Kconfig"
 source "board/freescale/bsc9131rdb/Kconfig"
 source "board/freescale/bsc9132qds/Kconfig"

arch/powerpc/cpu/mpc85xx/Makefile

@@ -53,7 +53,7 @@ obj-$(CONFIG_PPC_T1040) += t1040_ids.o
 obj-$(CONFIG_PPC_T1042)	+= t1040_ids.o
 obj-$(CONFIG_PPC_T1020)	+= t1040_ids.o
 obj-$(CONFIG_PPC_T1022)	+= t1040_ids.o
-obj-$(CONFIG_PPC_T1023) += t1024_ids.o
+obj-$(CONFIG_ARCH_T1023) += t1024_ids.o
 obj-$(CONFIG_PPC_T1024) += t1024_ids.o
 obj-$(CONFIG_PPC_T2080) += t2080_ids.o
 obj-$(CONFIG_PPC_T2081) += t2080_ids.o
@@ -96,7 +96,7 @@ obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
 obj-$(CONFIG_PPC_T1042)	+= t1040_serdes.o
 obj-$(CONFIG_PPC_T1020)	+= t1040_serdes.o
 obj-$(CONFIG_PPC_T1022)	+= t1040_serdes.o
-obj-$(CONFIG_PPC_T1023) += t1024_serdes.o
+obj-$(CONFIG_ARCH_T1023) += t1024_serdes.o
 obj-$(CONFIG_PPC_T1024) += t1024_serdes.o
 obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
 obj-$(CONFIG_PPC_T2081) += t2080_serdes.o

arch/powerpc/cpu/mpc85xx/speed.c

@@ -206,7 +206,7 @@ void get_sys_info(sys_info_t *sys_info)
 	defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
-#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_ARCH_T1023)
 #define FM1_CLK_SEL	0x00000007
 #define FM1_CLK_SHIFT	0
 #else
@@ -216,7 +216,7 @@ void get_sys_info(sys_info_t *sys_info)
 #define FM1_CLK_SHIFT	26
 #endif
 #if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
-#if defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+#if defined(CONFIG_PPC_T1024) || defined(CONFIG_ARCH_T1023)
 	rcw_tmp = in_be32(&gur->rcwsr[15]) - 4;
 #else
 	rcw_tmp = in_be32(&gur->rcwsr[7]);

arch/powerpc/include/asm/config_mpc85xx.h

@@ -730,7 +730,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_ERRATUM_A008378
 #define CONFIG_SYS_FSL_ERRATUM_A009663
 
-#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\
+#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_ARCH_T1023) ||\
 defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define CONFIG_E5500
 #define CONFIG_FSL_CORENET	     /* Freescale CoreNet platform */
@@ -741,7 +741,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #ifdef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_FSL_DDRC_GEN4
 #endif
-#if defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+#if defined(CONFIG_PPC_T1024) || defined(CONFIG_ARCH_T1023)
 #define CONFIG_MAX_CPUS			2
 #elif defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define CONFIG_MAX_CPUS			1

arch/powerpc/include/asm/fsl_secure_boot.h

@@ -34,7 +34,7 @@
 	defined(CONFIG_T104xD4QDS) || \
 	defined(CONFIG_T104xRDB) || \
 	defined(CONFIG_T104xD4RDB) || \
-	defined(CONFIG_PPC_T1023) || \
+	defined(CONFIG_ARCH_T1023) || \
 	defined(CONFIG_PPC_T1024)
 #ifndef CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_CPC_REINIT_F

arch/powerpc/include/asm/immap_85xx.h

@@ -1797,7 +1797,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define PXCKEN_MASK	0x80000000
 #define PXCK_MASK	0x00FF0000
 #define PXCK_BITS_START	16
-#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) || \
+#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_ARCH_T1023) || \
 	defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xff800000
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	23

configs/T1023RDB_NAND_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SPL=y

configs/T1023RDB_SDCARD_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SPL=y

configs/T1023RDB_SECURE_BOOT_defconfig

@@ -6,7 +6,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,SECURE_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="T1023RDB,SECURE_BOOT"
 CONFIG_BOOTDELAY=10
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y

configs/T1023RDB_SPIFLASH_defconfig

@@ -13,7 +13,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SPL=y

configs/T1023RDB_defconfig

@@ -5,7 +5,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB"
+CONFIG_SYS_EXTRA_OPTIONS="T1023RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_HUSH_PARSER=y

drivers/net/fm/Makefile

@@ -28,7 +28,7 @@ obj-$(CONFIG_PPC_T1040) += t1040.o
 obj-$(CONFIG_PPC_T1042)	+= t1040.o
 obj-$(CONFIG_PPC_T1020)	+= t1040.o
 obj-$(CONFIG_PPC_T1022)	+= t1040.o
-obj-$(CONFIG_PPC_T1023) += t1024.o
+obj-$(CONFIG_ARCH_T1023) += t1024.o
 obj-$(CONFIG_PPC_T1024) += t1024.o
 obj-$(CONFIG_PPC_T2080) += t2080.o
 obj-$(CONFIG_PPC_T2081) += t2080.o

scripts/config_whitelist.txt

@@ -3640,7 +3640,6 @@ CONFIG_PPC4xx_EMAC
 CONFIG_PPC64BRIDGE
 CONFIG_PPC_CLUSTER_START
 CONFIG_PPC_SPINTABLE_COMPATIBLE
-CONFIG_PPC_T1023
 CONFIG_PPC_T1024
 CONFIG_PPC_T1040
 CONFIG_PPC_T1042