powerpc: T1040: Remove macro CONFIG_PPC_T1040

Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -209,10 +209,12 @@ config TARGET_T1024RDB
 
 config TARGET_T1040QDS
 	bool "Support T1040QDS"
+	select ARCH_T1040
 	select PHYS_64BIT
 
 config TARGET_T1040RDB
 	bool "Support T1040RDB"
+	select ARCH_T1040
 	select SUPPORT_SPL
 	select PHYS_64BIT
 
@@ -368,6 +370,9 @@ config ARCH_T1023
 config ARCH_T1024
 	bool
 
+config ARCH_T1040
+	bool
+
 source "board/freescale/b4860qds/Kconfig"
 source "board/freescale/bsc9131rdb/Kconfig"
 source "board/freescale/bsc9132qds/Kconfig"

arch/powerpc/cpu/mpc85xx/Makefile

@@ -49,7 +49,7 @@ obj-$(CONFIG_PPC_T4160) += t4240_ids.o
 obj-$(CONFIG_PPC_T4080) += t4240_ids.o
 obj-$(CONFIG_ARCH_B4420) += b4860_ids.o
 obj-$(CONFIG_ARCH_B4860) += b4860_ids.o
-obj-$(CONFIG_PPC_T1040) += t1040_ids.o
+obj-$(CONFIG_ARCH_T1040) += t1040_ids.o
 obj-$(CONFIG_PPC_T1042)	+= t1040_ids.o
 obj-$(CONFIG_PPC_T1020)	+= t1040_ids.o
 obj-$(CONFIG_PPC_T1022)	+= t1040_ids.o
@@ -92,7 +92,7 @@ obj-$(CONFIG_PPC_T4080) += t4240_serdes.o
 obj-$(CONFIG_ARCH_B4420) += b4860_serdes.o
 obj-$(CONFIG_ARCH_B4860) += b4860_serdes.o
 obj-$(CONFIG_ARCH_BSC9132) += bsc9132_serdes.o
-obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
+obj-$(CONFIG_ARCH_T1040) += t1040_serdes.o
 obj-$(CONFIG_PPC_T1042)	+= t1040_serdes.o
 obj-$(CONFIG_PPC_T1020)	+= t1040_serdes.o
 obj-$(CONFIG_PPC_T1022)	+= t1040_serdes.o

arch/powerpc/cpu/mpc85xx/fdt.c

@@ -556,7 +556,7 @@ void fdt_fixup_dma3(void *blob)
 #define fdt_fixup_dma3(x)
 #endif
 
-#if defined(CONFIG_PPC_T1040)
+#if defined(CONFIG_ARCH_T1040)
 static void fdt_fixup_l2_switch(void *blob)
 {
 	uchar l2swaddr[6];

arch/powerpc/include/asm/config_mpc85xx.h

@@ -679,7 +679,7 @@
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #endif
 
-#elif defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042) ||\
+#elif defined(CONFIG_ARCH_T1040) || defined(CONFIG_PPC_T1042) ||\
 defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_E5500
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
@@ -689,7 +689,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #ifdef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_FSL_DDRC_GEN4
 #endif
-#if defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042)
+#if defined(CONFIG_ARCH_T1040) || defined(CONFIG_PPC_T1042)
 #define CONFIG_MAX_CPUS			4
 #elif defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_MAX_CPUS			2

arch/powerpc/include/asm/immap_85xx.h

@@ -1776,7 +1776,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL	0x00ff0000
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	16
 #define FSL_CORENET_RCWSR6_BOOT_LOC	0x0f800000
-#elif defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042) ||\
+#elif defined(CONFIG_ARCH_T1040) || defined(CONFIG_PPC_T1042) ||\
 defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL	0xff000000
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	24

board/freescale/t102xqds/spl.c

@@ -66,7 +66,7 @@ void board_init_f(ulong bootflag)
 	u32 plat_ratio, sys_clk, ccb_clk;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
-#if defined(CONFIG_PPC_T1040) && defined(CONFIG_SPL_NAND_BOOT)
+#if defined(CONFIG_ARCH_T1040) && defined(CONFIG_SPL_NAND_BOOT)
 	/*
 	 * There is T1040 SoC issue where NOR, FPGA are inaccessible during
 	 * NAND boot because IFC signals > IFC_AD7 are not enabled.

configs/T1040D4RDB_NAND_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_SDCARD_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_SECURE_BOOT_defconfig

@@ -6,7 +6,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_SPIFLASH_defconfig

@@ -13,7 +13,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_defconfig

@@ -5,7 +5,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040QDS_DDR4_defconfig

@@ -6,7 +6,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 # CONFIG_CONSOLE_MUX is not set

configs/T1040QDS_SECURE_BOOT_defconfig

@@ -7,7 +7,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 # CONFIG_CONSOLE_MUX is not set

configs/T1040QDS_defconfig

@@ -6,7 +6,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 # CONFIG_CONSOLE_MUX is not set

configs/T1040RDB_NAND_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_SDCARD_defconfig

@@ -12,7 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_SECURE_BOOT_defconfig

@@ -6,7 +6,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT,T1040RDB"
+CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT,T1040RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_SPIFLASH_defconfig

@@ -13,7 +13,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040RDB_defconfig

@@ -5,7 +5,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB"
+CONFIG_SYS_EXTRA_OPTIONS="T1040RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

drivers/net/fm/Makefile

@@ -24,7 +24,7 @@ obj-$(CONFIG_ARCH_P3041) += p5020.o
 obj-$(CONFIG_ARCH_P4080) += p4080.o
 obj-$(CONFIG_ARCH_P5020) += p5020.o
 obj-$(CONFIG_ARCH_P5040) += p5040.o
-obj-$(CONFIG_PPC_T1040) += t1040.o
+obj-$(CONFIG_ARCH_T1040) += t1040.o
 obj-$(CONFIG_PPC_T1042)	+= t1040.o
 obj-$(CONFIG_PPC_T1020)	+= t1040.o
 obj-$(CONFIG_PPC_T1022)	+= t1040.o

include/configs/T102xRDB.h

@@ -556,7 +556,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
 #define CONFIG_PCIE3		/* PCIE controller 3 */
-#ifdef CONFIG_PPC_T1040
+#ifdef CONFIG_ARCH_T1040
 #define CONFIG_PCIE4		/* PCIE controller 4 */
 #endif
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */

scripts/config_whitelist.txt

@@ -3640,7 +3640,6 @@ CONFIG_PPC4xx_EMAC
 CONFIG_PPC64BRIDGE
 CONFIG_PPC_CLUSTER_START
 CONFIG_PPC_SPINTABLE_COMPATIBLE
-CONFIG_PPC_T1040
 CONFIG_PPC_T1042
 CONFIG_PPC_T2080
 CONFIG_PPC_T2081