i2c: Added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET

This patch added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET
and enabled it in respective defconfig.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

configs/syzygy_hub_defconfig

@@ -36,6 +36,7 @@ CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
 CONFIG_SYS_I2C_ZYNQ=y
+CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_PHY_MARVELL=y

configs/xilinx_zynqmp_zcu102_rev1_0_defconfig

@@ -55,6 +55,7 @@ CONFIG_DM_GPIO=y
 CONFIG_CMD_PCA953X=y
 CONFIG_SYS_I2C_ZYNQ=y
 CONFIG_MISC=y
+CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y

configs/xilinx_zynqmp_zcu102_revA_defconfig

@@ -55,6 +55,7 @@ CONFIG_DM_GPIO=y
 CONFIG_CMD_PCA953X=y
 CONFIG_SYS_I2C_ZYNQ=y
 CONFIG_MISC=y
+CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y

configs/xilinx_zynqmp_zcu102_revB_defconfig

@@ -55,6 +55,7 @@ CONFIG_DM_GPIO=y
 CONFIG_CMD_PCA953X=y
 CONFIG_SYS_I2C_ZYNQ=y
 CONFIG_MISC=y
+CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y

configs/zynq_zybo_defconfig

@@ -41,6 +41,7 @@ CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
 CONFIG_SYS_I2C_ZYNQ=y
+CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y

drivers/misc/Kconfig

@@ -214,6 +214,12 @@ config SPL_I2C_EEPROM
 	  This option is an SPL-variant of the I2C_EEPROM option.
 	  See the help of I2C_EEPROM for details.
 
+config ZYNQ_GEM_I2C_MAC_OFFSET
+	hex "Set the I2C MAC offset"
+	default 0x0
+	help
+	  Set the MAC offset for i2C.
+
 if I2C_EEPROM
 
 config SYS_I2C_EEPROM_ADDR

include/configs/syzygy_hub.h

@@ -14,7 +14,6 @@
 #define CONFIG_ZYNQ_I2C1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_ZYNQ_GEM_EEPROM_ADDR    0x57
-#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0xFA
 
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"fit_image=fit.itb\0"		\

include/configs/xilinx_zynqmp_zcu102.h

@@ -43,7 +43,6 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_ZYNQ_EEPROM_BUS		5
 #define CONFIG_ZYNQ_GEM_EEPROM_ADDR	0x54
-#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET	0x20
 
 #include <configs/xilinx_zynqmp.h>
 

include/configs/zynq_zybo.h

@@ -15,7 +15,6 @@
 #define CONFIG_ZYNQ_I2C1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_ZYNQ_GEM_EEPROM_ADDR	0x50
-#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET	0xFA
 #define CONFIG_DISPLAY
 #define CONFIG_I2C_EDID