usb: ehci: rmobile: Remove xHCI address

echi-rmobile does not support xHCI. This removes xHCI address
from address table. And this revise a value of CONFIG_USB_MAX_CONTROLLER_COUNT
for lager board and koelsh board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

drivers/usb/host/ehci-rmobile.c

@@ -21,19 +21,16 @@ static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0A0000,	/* USB1 */
 	0xEE0C0000,	/* USB2 */
-	0xEE000000	/* USB3 (USB3.0 Host)*/
 };
 #elif defined(CONFIG_R8A7791)
 static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0C0000,	/* USB1 */
-	0xEE000000	/* USB3 (USB3.0 Host)*/
 };
 #elif defined(CONFIG_R8A7794)
 static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0C0000,	/* USB1 */
-	/* R8A7794 does not have USB 3.0. */
 };
 #else
 #error rmobile EHCI USB driver not supported on this platform

include/configs/koelsch.h

@@ -171,7 +171,7 @@
 /* USB */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_USB_STORAGE
 
 #endif	/* __KOELSCH_H */

include/configs/lager.h

@@ -175,7 +175,7 @@
 /* USB */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	4
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
 #define CONFIG_USB_STORAGE
 
 #endif	/* __LAGER_H */