kconfig: Move CONFIG_OF_LIBFDT to Kconfig

This patch follows work done by:
"Move CONFIG_OF_LIBFDT to Kconfig"
(sha1: 69e173eb57d1f4848f070c83456096ba5d2ba1b4)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Add xpress* to the patch]
Signed-off-by: Tom Rini <trini@konsulko.com>

configs/legoev3_defconfig

@@ -10,3 +10,5 @@ CONFIG_AUTOBOOT_STOP_STR="l"
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SYS_NS16550=y
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set

configs/ma5d4evk_defconfig

@@ -12,3 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4"
 CONFIG_SPI_FLASH=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set

configs/stm32f746-disco_defconfig

@@ -7,3 +7,5 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set

configs/xpress_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_XPRESS=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ccv/xpress/imximage.cfg"
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
+CONFIG_OF_LIBFDT=y

configs/xpress_spl_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
+CONFIG_OF_LIBFDT=y

configs/zipitz2_defconfig

@@ -1,7 +1,9 @@
 CONFIG_ARM=y
 CONFIG_TARGET_ZIPITZ2=y
+CONFIG_SYS_PROMPT="$ "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_NET is not set
 # CONFIG_CMD_NFS is not set
-CONFIG_SYS_PROMPT="$ "
+CONFIG_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set

include/configs/legoev3.h

@@ -160,7 +160,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
-#define CONFIG_OF_LIBFDT
 
 /*
  * Linux Information

include/configs/ma5d4evk.h

@@ -150,7 +150,6 @@
 #define CONFIG_LOADADDR		0x20800000
 #define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-#define CONFIG_OF_LIBFDT
 
 /*
  * Extra Environments

include/configs/pic32mzdask.h

@@ -92,11 +92,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/*
- * Handover flattened device tree (dtb file) to Linux kernel
- */
-#define CONFIG_OF_LIBFDT	1
-
 /*-----------------------------------------------------------------------
  * SDHC Configuration
  */

include/configs/stm32f746-disco.h

@@ -11,7 +11,6 @@
 #define CONFIG_SYS_THUMB_BUILD
 /*#define CONFIG_SYS_NO_FLASH*/
 
-#define CONFIG_OF_LIBFDT
 #define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_SYS_FLASH_BASE		0x08000000

include/configs/xilinx-ppc.h

@@ -101,7 +101,6 @@
 #define CONFIG_SYS_NO_FLASH
 #endif
 
-#define CONFIG_OF_LIBFDT       1
 #define CONFIG_BAUDRATE			115200
 /* The following table includes the supported baudrates */
 # define CONFIG_SYS_BAUDRATE_TABLE \

include/configs/xpress.h

@@ -77,7 +77,6 @@
 #define CONFIG_SYS_MMC_ENV_PART		1	/* boot parition */
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC2 */
 
-#define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_CACHE

include/configs/zipitz2.h

@@ -45,7 +45,6 @@
 #define	CONFIG_SETUP_MEMORY_TAGS
 #define	CONFIG_SYS_TEXT_BASE		0x0
 #define	CONFIG_LZMA			/* LZMA compression support */
-#define	CONFIG_OF_LIBFDT
 
 /*
  * Serial Console Configuration