Merge git://git.denx.de/u-boot-sunxi

arch/arm/Kconfig

@@ -694,8 +694,7 @@ config ARCH_SUNXI
 	select USB_STORAGE if DISTRO_DEFAULTS
 	select USB_KEYBOARD if DISTRO_DEFAULTS
 	select USE_TINY_PRINTF
-	imply CMD_FASTBOOT
-	imply FASTBOOT
+	imply CMD_GPT
 	imply FAT_WRITE
 	imply PRE_CONSOLE_BUFFER
 	imply SPL_GPIO_SUPPORT
@@ -705,7 +704,7 @@ config ARCH_SUNXI
 	imply SPL_MMC_SUPPORT if MMC
 	imply SPL_POWER_SUPPORT
 	imply SPL_SERIAL_SUPPORT
-	imply USB_FUNCTION_FASTBOOT
+	imply USB_GADGET
 
 config TARGET_TS4600
 	bool "Support TS4600"

arch/arm/dts/Makefile

@@ -313,8 +313,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
 	sun8i-r16-parrot.dtb
 dtb-$(CONFIG_MACH_SUN8I_A83T) += \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-sinovoip-bpi-m3.dtb
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb
 dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h2-plus-orangepi-zero.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \

arch/arm/dts/axp223.dtsi

@@ -0,0 +1,58 @@
+/*
+ * Copyright 2016 Free Electrons
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf
+ *
+ * The AXP223 shares most of its logic with the AXP221 but it has some
+ * differences, for the VBUS driver for example.
+ */
+
+#include "axp22x.dtsi"
+
+&usb_power_supply {
+	compatible = "x-powers,axp223-usb-power-supply";
+};

arch/arm/dts/axp22x.dtsi

@@ -52,6 +52,16 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp221-battery-power-supply";
+		status = "disabled";
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;

arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts

@@ -105,6 +105,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -132,16 +136,14 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
+#include "axp209.dtsi"
+
 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_rx_pins_a>;
@@ -167,10 +169,10 @@
 	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
 	non-removable;
-	enable-sdio-wakeup;
+	wakeup-source;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
@@ -181,7 +183,7 @@
 
 &mmc3_pins_a {
 	/* AP6210 requires pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	bias-pull-up;
 };
 
 &ohci0 {
@@ -192,38 +194,81 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
-		allwinner,pins = "PH23";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH23";
+		function = "gpio_out";
 	};
 
 	led_pins_bpi_m1p: led_pins@0 {
-		allwinner,pins = "PH24", "PH25";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH24", "PH25";
+		function = "gpio_out";
 	};
 
 	mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
-		allwinner,pins = "PH10";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+		pins = "PH10";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 
 	mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
-		allwinner,pins = "PH22";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH22";
+		function = "gpio_out";
 	};
 };
 
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};

arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts

@@ -0,0 +1,70 @@
+ /*
+ * Copyright 2017 Olimex Ltd.
+ * Stefan Mavrodiev <stefan@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-micro.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-MICRO-eMMC";
+	compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};

arch/arm/dts/sun8i-a23-a33.dtsi

@@ -46,7 +46,8 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -60,7 +61,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
 			status = "disabled";
 		};
 	};
@@ -80,7 +83,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
@@ -102,151 +105,16 @@
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		ext_osc32k: ext_osc32k_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll5: pll5_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll5";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <5>,
-					<12>, <13>;
-			clock-output-names = "apb1_codec", "apb1_pio",
-					"apb1_daudio0",	"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-indices = <0>, <1>,
-					<2>, <16>,
-					<17>, <18>,
-					<19>, <20>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2",
-					"apb2_uart3", "apb2_uart4";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun8i-a23-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
-					     "usb_hsic_12M", "usb_ohci0";
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
 		};
 	};
 
@@ -260,24 +128,23 @@
 			compatible = "allwinner,sun8i-a23-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
 			#dma-cells = <1>;
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun7i-a20-mmc",
-				     "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 8>;
+			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -286,18 +153,17 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun7i-a20-mmc",
-				     "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 9>;
+			resets = <&ccu RST_BUS_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -306,18 +172,17 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun7i-a20-mmc",
-				     "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 10>;
+			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -325,12 +190,55 @@
 			#size-cells = <0>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
 		ehci0: usb@01c1a000 {
 			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -340,101 +248,100 @@
 			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&apb1_gates 5>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PF2", "PF4";
-				allwinner,function = "uart0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins_a: uart1@0 {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
+				pins = "PG8", "PG9";
+				function = "uart1";
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0", "PF1", "PF2",
-						 "PF3", "PF4", "PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc1_pins_a: mmc1@0 {
-				allwinner,pins = "PG0", "PG1", "PG2",
-						 "PG3", "PG4", "PG5";
-				allwinner,function = "mmc1";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc2_8bit_pins: mmc2_8bit {
-				allwinner,pins = "PC5", "PC6", "PC8",
-						 "PC9", "PC10", "PC11",
-						 "PC12", "PC13", "PC14",
-						 "PC15", "PC16";
-				allwinner,function = "mmc2";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			pwm0_pins: pwm0 {
-				allwinner,pins = "PH0";
-				allwinner,function = "pwm0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PH0";
+				function = "pwm0";
 			};
 
 			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PH2", "PH3";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PH2", "PH3";
+				function = "i2c0";
 			};
 
 			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PH4", "PH5";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PH4", "PH5";
+				function = "i2c1";
 			};
 
 			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PE12", "PE13";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PE12", "PE13";
+				function = "i2c2";
 			};
-		};
-
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
 
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
 		};
 
 		timer@01c20c00 {
@@ -472,8 +379,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -485,8 +392,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -498,8 +405,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -511,8 +418,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -524,8 +431,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -535,8 +442,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -546,8 +453,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -557,17 +464,44 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-a23-mali",
+				     "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
+			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
 			      <0x01c86000 0x2000>;
 			interrupt-controller;
@@ -580,13 +514,16 @@
 			reg = <0x01f00000 0x54>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
 		};
 
-		nmi_intc: interrupt-controller@01f00c0c {
-			compatible = "allwinner,sun6i-a31-sc-nmi";
+		nmi_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0x01f00c0c 0x38>;
+			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -632,6 +569,10 @@
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
+
+			codec_analog: codec-analog {
+				compatible = "allwinner,sun8i-a23-codec-analog";
+			};
 		};
 
 		cpucfg@01f01c00 {
@@ -654,7 +595,8 @@
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
@@ -664,17 +606,15 @@
 			#gpio-cells = <3>;
 
 			r_rsb_pins: r_rsb {
-				allwinner,pins = "PL0", "PL1";
-				allwinner,function = "s_rsb";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
 			};
 
 			r_uart_pins_a: r_uart@0 {
-				allwinner,pins = "PL2", "PL3";
-				allwinner,function = "s_uart";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+				pins = "PL2", "PL3";
+				function = "s_uart";
 			};
 		};
 

arch/arm/dts/sun8i-a23.dtsi

@@ -49,78 +49,40 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
-	clocks {
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <6>,
-					<8>, <9>, <10>,
-					<13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
-			clock-output-names = "mbus";
-		};
-	};
-
 	soc@01c00000 {
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun6i-a31-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a23-usb-phy";
-			reg = <0x01c19400 0x10>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a23-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
 			status = "disabled";
-			#phy-cells = <1>;
 		};
 	};
 };
 
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
+};
+
 &pio {
 	compatible = "allwinner,sun8i-a23-pinctrl";
 	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};

arch/arm/dts/sun8i-a33-sinlinx-sina33.dts

@@ -61,6 +61,31 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	panel {
+		compatible = "netron-dy,e231732";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
 };
 
 &ehci0 {
@@ -207,12 +232,30 @@
 	regulator-name = "vcc-rtc";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */

arch/arm/dts/sun8i-a33.dtsi

@@ -43,19 +43,137 @@
  */
 
 #include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 
 / {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
 	cpus {
+		cpu@0 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-a33-display-engine";
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&ths>;
+	};
+
+	mali_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-144000000 {
+			opp-hz = /bits/ 64 <144000000>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
 		};
 	};
 
@@ -63,113 +181,310 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
-	clocks {
-		/* Dummy clock for pll11 (DDR1) until actually implemented */
-		pll11: pll11_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll11";
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <5>,
-				        <6>, <8>, <9>,
-				        <10>, <13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>,
-					<58>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc",
-					"ahb1_sat";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "ss";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
-			clock-output-names = "mbus";
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun8i-a33-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&link_codec>;
+		simple-audio-card,bitclock-master = <&link_codec>;
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
 		};
 	};
 
 	soc@01c00000 {
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun8i-a33-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_LCD>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
 		crypto: crypto-engine@01c15000 {
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
-			resets = <&ahb1_rst 5>;
+			resets = <&ccu RST_BUS_SS>;
 			reset-names = "ahb";
 		};
 
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun8i-a33-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
+		dai: dai@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@01c22e00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
 			status = "disabled";
 		};
 
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a33-usb-phy";
-			reg = <0x01c19400 0x14>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
+		ths: ths@01c25000 {
+			compatible = "allwinner,sun8i-a33-ths";
+			reg = <0x01c25000 0x100>;
+			#thermal-sensor-cells = <0>;
+			#io-channel-cells = <0>;
+		};
+
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun8i-a33-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
 			status = "disabled";
-			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun8i-a33-display-backend";
+			reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+			reg-names = "be", "sat";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+			clock-names = "ahb", "mod",
+				      "ram", "sat";
+			resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+			reset-names = "be", "sat";
+			assigned-clocks = <&ccu CLK_DE_BE>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@01e70000 {
+			compatible = "allwinner,sun8i-a33-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			assigned-clocks = <&ccu CLK_DRC>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+				};
+
+				map3 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert0: gpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_alert1: gpu_alert1 {
+					/* milliCelsius */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 };
 
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
+&mali {
+	operating-points-v2 = <&mali_opp_table>;
+};
+
 &pio {
 	compatible = "allwinner,sun8i-a33-pinctrl";
 	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 
 	uart0_pins_b: uart0@1 {
-		allwinner,pins = "PB0", "PB1";
-		allwinner,function = "uart0";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PB0", "PB1";
+		function = "uart0";
 	};
 
 };
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};

arch/arm/include/asm/arch-sunxi/spl.h

@@ -78,4 +78,6 @@ typedef char boot_file_head_not_multiple_of_32[1 - 2*(sizeof(struct boot_file_he
 
 #define is_boot0_magic(addr)	(memcmp((void *)addr, BOOT0_MAGIC, 8) == 0)
 
+uint32_t sunxi_get_boot_device(void);
+
 #endif

arch/arm/include/asm/arch-sunxi/usb_phy.h

@@ -19,10 +19,3 @@ void sunxi_usb_phy_power_off(int index);
 int sunxi_usb_phy_vbus_detect(int index);
 int sunxi_usb_phy_id_detect(int index);
 void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
-
-/* Not really phy related, but we have to declare this somewhere ... */
-#if defined(CONFIG_USB_MUSB_HOST) || defined(CONFIG_USB_MUSB_GADGET)
-void sunxi_musb_board_init(void);
-#else
-#define sunxi_musb_board_init()
-#endif

arch/arm/mach-imx/spl.c

@@ -99,7 +99,7 @@ u32 spl_boot_device(void)
 #ifdef CONFIG_SPL_USB_GADGET_SUPPORT
 int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
 {
-	put_unaligned(CONFIG_G_DNL_PRODUCT_NUM + 0xfff, &dev->idProduct);
+	put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM + 0xfff, &dev->idProduct);
 
 	return 0;
 }

arch/arm/mach-sunxi/board.c

@@ -14,9 +14,7 @@
 #include <mmc.h>
 #include <i2c.h>
 #include <serial.h>
-#ifdef CONFIG_SPL_BUILD
 #include <spl.h>
-#endif
 #include <asm/gpio.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
@@ -212,11 +210,12 @@ void s_init(void)
 
 #ifdef CONFIG_SPL_BUILD
 DECLARE_GLOBAL_DATA_PTR;
+#endif
 
 /* The sunxi internal brom will try to loader external bootloader
  * from mmc0, nand flash, mmc2.
  */
-u32 spl_boot_device(void)
+uint32_t sunxi_get_boot_device(void)
 {
 	int boot_source;
 
@@ -255,6 +254,12 @@ u32 spl_boot_device(void)
 	return -1;		/* Never reached */
 }
 
+#ifdef CONFIG_SPL_BUILD
+u32 spl_boot_device(void)
+{
+	return sunxi_get_boot_device();
+}
+
 /* No confirmation data available in SPL yet. Hardcode bootmode */
 u32 spl_boot_mode(const u32 boot_device)
 {

arch/arm/mach-sunxi/usb_phy.c

@@ -18,12 +18,18 @@
 #include <asm/io.h>
 #include <errno.h>
 
-#define SUNXI_USB_PMU_IRQ_ENABLE	0x800
-#ifdef CONFIG_MACH_SUN8I_A33
-#define SUNXI_USB_CSR			0x410
-#else
+#if defined(CONFIG_MACH_SUN4I) ||		   \
+	defined(CONFIG_MACH_SUN5I) ||		   \
+	defined(CONFIG_MACH_SUN6I) ||		   \
+	defined(CONFIG_MACH_SUN7I) ||		   \
+	defined(CONFIG_MACH_SUN8I_A23) ||	   \
+	defined(CONFIG_MACH_SUN9I)
 #define SUNXI_USB_CSR			0x404
+#else
+#define SUNXI_USB_CSR			0x410
 #endif
+
+#define SUNXI_USB_PMU_IRQ_ENABLE	0x800
 #define SUNXI_USB_PASSBY_EN		1
 
 #define SUNXI_EHCI_AHB_ICHR8_EN		(1 << 10)

arch/sandbox/include/asm/io.h

@@ -56,6 +56,53 @@ void outl(unsigned int value, unsigned int addr);
 void outw(unsigned int value, unsigned int addr);
 void outb(unsigned int value, unsigned int addr);
 
+#define out_arch(type,endian,a,v)	write##type(cpu_to_##endian(v),a)
+#define in_arch(type,endian,a)		endian##_to_cpu(read##type(a))
+
+#define out_le32(a,v)	out_arch(l,le32,a,v)
+#define out_le16(a,v)	out_arch(w,le16,a,v)
+
+#define in_le32(a)	in_arch(l,le32,a)
+#define in_le16(a)	in_arch(w,le16,a)
+
+#define out_be32(a,v)	out_arch(l,be32,a,v)
+#define out_be16(a,v)	out_arch(w,be16,a,v)
+
+#define in_be32(a)	in_arch(l,be32,a)
+#define in_be16(a)	in_arch(w,be16,a)
+
+#define out_8(a,v)	writeb(v,a)
+#define in_8(a)		readb(a)
+
+#define clrbits(type, addr, clear) \
+	out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+	out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
 static inline void _insw(volatile u16 *port, void *buf, int ns)
 {
 }

board/samsung/common/gadget.c

@@ -17,8 +17,8 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
 		put_unaligned(CONFIG_G_DNL_UMS_VENDOR_NUM, &dev->idVendor);
 		put_unaligned(CONFIG_G_DNL_UMS_PRODUCT_NUM, &dev->idProduct);
 	} else {
-		put_unaligned(CONFIG_G_DNL_VENDOR_NUM, &dev->idVendor);
-		put_unaligned(CONFIG_G_DNL_PRODUCT_NUM, &dev->idProduct);
+		put_unaligned(CONFIG_USB_GADGET_VENDOR_NUM, &dev->idVendor);
+		put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM, &dev->idProduct);
 	}
 	return 0;
 }

board/siemens/common/factoryset.c

@@ -145,8 +145,8 @@ int factoryset_read_eeprom(int i2c_addr)
 	unsigned char *cp, *cp1;
 
 #if defined(CONFIG_USB_FUNCTION_DFU)
-	factory_dat.usb_vendor_id = CONFIG_G_DNL_VENDOR_NUM;
-	factory_dat.usb_product_id = CONFIG_G_DNL_PRODUCT_NUM;
+	factory_dat.usb_vendor_id = CONFIG_USB_GADGET_VENDOR_NUM;
+	factory_dat.usb_product_id = CONFIG_USB_GADGET_PRODUCT_NUM;
 #endif
 	if (i2c_probe(i2c_addr))
 		goto err;

board/sunxi/MAINTAINERS

@@ -118,6 +118,11 @@ M:	Paul Kocialkowski <contact@paulk.fr>
 S:	Maintained
 F:	configs/Ampe_A76_defconfig
 
+BANANAPI M1 PLUS
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/bananapi_m1_plus_defconfig
+
 BANANAPI M2 ULTRA BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained

board/sunxi/board.c

@@ -32,6 +32,7 @@
 #include <libfdt.h>
 #include <nand.h>
 #include <net.h>
+#include <spl.h>
 #include <sy8106a.h>
 #include <asm/setup.h>
 
@@ -491,20 +492,6 @@ int board_mmc_init(bd_t *bis)
 		return -1;
 #endif
 
-#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
-	/*
-	 * On systems with an emmc (mmc2), figure out if we are booting from
-	 * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc.
-	 * are searched there first. Note we only do this for u-boot proper,
-	 * not for the SPL, see spl_boot_device().
-	 */
-	if (readb(SPL_ADDR + 0x28) == SUNXI_BOOTED_FROM_MMC2) {
-		/* Booting from emmc / mmc2, swap */
-		mmc0->block_dev.devnum = 1;
-		mmc1->block_dev.devnum = 0;
-	}
-#endif
-
 	return 0;
 }
 #endif
@@ -720,13 +707,22 @@ static void setup_environment(const void *fdt)
 int misc_init_r(void)
 {
 	__maybe_unused int ret;
+	uint boot;
 
 	env_set("fel_booted", NULL);
 	env_set("fel_scriptaddr", NULL);
+	env_set("mmc_bootdev", NULL);
+
+	boot = sunxi_get_boot_device();
 	/* determine if we are running in FEL mode */
-	if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
+	if (boot == BOOT_DEVICE_BOARD) {
 		env_set("fel_booted", "1");
 		parse_spl_header(SPL_ADDR);
+	/* or if we booted from MMC, and which one */
+	} else if (boot == BOOT_DEVICE_MMC1) {
+		env_set("mmc_bootdev", "0");
+	} else if (boot == BOOT_DEVICE_MMC2) {
+		env_set("mmc_bootdev", "1");
 	}
 
 	setup_environment(gd->fdt_blob);
@@ -736,7 +732,10 @@ int misc_init_r(void)
 	if (ret)
 		return ret;
 #endif
-	sunxi_musb_board_init();
+
+#ifdef CONFIG_USB_ETHER
+	usb_ether_init();
+#endif
 
 	return 0;
 }

cmd/Kconfig

@@ -665,10 +665,17 @@ config CMD_GPT
 	bool "GPT (GUID Partition Table) command"
 	select PARTITION_UUIDS
 	select EFI_PARTITION
+	imply RANDOM_UUID
 	help
 	  Enable the 'gpt' command to ready and write GPT style partition
 	  tables.
 
+config RANDOM_UUID
+	bool "GPT Random UUID generation"
+	help
+	  Enable the generation of partitions with random UUIDs if none
+	  are provided.
+
 config CMD_GPT_RENAME
 	bool "GPT partition renaming commands"
 	depends on CMD_GPT

cmd/fastboot/Kconfig

@@ -3,11 +3,16 @@ comment "FASTBOOT"
 menuconfig FASTBOOT
 	bool "Fastboot support"
 	depends on USB_GADGET
+	default y if ARCH_SUNXI && USB_MUSB_GADGET
 
 if FASTBOOT
 
 config USB_FUNCTION_FASTBOOT
 	bool "Enable USB fastboot gadget"
+	default y
+	select USB_GADGET_DOWNLOAD
+	imply ANDROID_BOOT_IMAGE
+	imply CMD_FASTBOOT
 	help
 	  This enables the USB part of the fastboot gadget.
 
@@ -69,6 +74,8 @@ config FASTBOOT_FLASH
 config FASTBOOT_FLASH_MMC_DEV
 	int "Define FASTBOOT MMC FLASH default device"
 	depends on FASTBOOT_FLASH && MMC
+	default 0 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
+	default 1 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
 	help
 	  The fastboot "flash" command requires additional information
 	  regarding the non-volatile storage device. Define this to

configs/A13-OLinuXino_defconfig

@@ -31,8 +31,3 @@ CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010

configs/A20-OLinuXino-Lime2-eMMC_defconfig

@@ -14,7 +14,6 @@ CONFIG_AHCI=y
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
@@ -33,8 +32,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010

configs/A20-OLinuXino-Lime2_defconfig

@@ -32,8 +32,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010

configs/A20-OLinuXino_MICRO-eMMC_defconfig

@@ -0,0 +1,27 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=384
+CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_I2C1_ENABLE=y
+CONFIG_VIDEO_VGA=y
+CONFIG_SATAPWR="PB8"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_SCSI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y

configs/CHIP_defconfig

@@ -22,9 +22,4 @@ CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/CHIP_pro_defconfig

@@ -27,9 +27,4 @@ CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/Cubietruck_defconfig

@@ -32,8 +32,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010

configs/Cubietruck_plus_defconfig

@@ -4,6 +4,7 @@ CONFIG_MACH_SUN8I_A83T=y
 CONFIG_DRAM_CLK=672
 CONFIG_DRAM_ZQ=15355
 CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
 CONFIG_USB0_ID_DET="PH11"

configs/LicheePi_Zero_defconfig

@@ -4,8 +4,12 @@ CONFIG_MACH_SUN8I_V3S=y
 CONFIG_DRAM_CLK=360
 CONFIG_DRAM_ZQ=14779
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
+CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 # CONFIG_NETDEVICES is not set
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set

configs/Nintendo_NES_Classic_Edition_defconfig

@@ -22,8 +22,3 @@ CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_AXP_ELDO2_VOLT=1800
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010

configs/Sinlinx_SinA33_defconfig

@@ -15,7 +15,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
@@ -27,8 +26,3 @@ CONFIG_DFU_RAM=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-CONFIG_G_DNL_PRODUCT_NUM=0x1010

configs/Sinovoip_BPI_M3_defconfig

@@ -13,7 +13,7 @@ CONFIG_USB0_ID_DET="PH11"
 CONFIG_USB1_VBUS_PIN="PD24"
 CONFIG_AXP_GPIO=y
 CONFIG_SATAPWR="PD25"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_CONSOLE_MUX=y
 CONFIG_SPL=y

configs/am335x_baltos_defconfig

@@ -57,9 +57,11 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0403
+CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0403
-CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_USB_ETHER=y
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/am335x_boneblack_defconfig

@@ -16,7 +16,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR="d"
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
@@ -36,10 +35,11 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT=y
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/am335x_boneblack_vboot_defconfig

@@ -19,7 +19,6 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR="d"
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
@@ -46,8 +45,8 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
 CONFIG_LZO=y

configs/am335x_evm_defconfig

@@ -13,7 +13,6 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x00080000
@@ -48,10 +47,10 @@ CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
 CONFIG_RSA=y
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/am335x_evm_nor_defconfig

@@ -12,7 +12,6 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x00080000
@@ -35,10 +34,10 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT=y
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/am335x_evm_norboot_defconfig

@@ -12,7 +12,6 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_MTDPARTS=y
@@ -31,10 +30,11 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT=y
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/am335x_evm_spiboot_defconfig

@@ -14,7 +14,6 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
@@ -33,10 +32,10 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT=y
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/am335x_evm_usbspl_defconfig

@@ -16,7 +16,6 @@ CONFIG_SPL_USB_GADGET_SUPPORT=y
 CONFIG_SPL_USBETH_SUPPORT=y
 # CONFIG_SPL_YMODEM_SUPPORT is not set
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x00080000
@@ -39,10 +38,10 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT=y
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/am335x_hs_evm_defconfig

@@ -52,9 +52,10 @@ CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
 CONFIG_RSA=y
 CONFIG_LZO=y

configs/am43xx_evm_defconfig

@@ -50,7 +50,7 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0403
+CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0403
-CONFIG_G_DNL_PRODUCT_NUM=0xbd00

configs/am43xx_evm_ethboot_defconfig

@@ -61,8 +61,8 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0403
+CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0403
-CONFIG_G_DNL_PRODUCT_NUM=0xbd00
 CONFIG_OF_LIBFDT=y

configs/am43xx_evm_qspiboot_defconfig

@@ -52,9 +52,9 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0403
+CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0403
-CONFIG_G_DNL_PRODUCT_NUM=0xbd00
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/am43xx_evm_usbhost_boot_defconfig

@@ -73,7 +73,7 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0403
+CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0403
-CONFIG_G_DNL_PRODUCT_NUM=0xbd00

configs/am43xx_hs_evm_defconfig

@@ -61,7 +61,7 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0403
+CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0403
-CONFIG_G_DNL_PRODUCT_NUM=0xbd00

configs/am57xx_evm_defconfig

@@ -23,7 +23,6 @@ CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
 CONFIG_FASTBOOT_USB_DEV=1
@@ -70,7 +69,6 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022

configs/am57xx_evm_nodt_defconfig

@@ -15,8 +15,6 @@ CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
 CONFIG_FASTBOOT_USB_DEV=1
@@ -62,9 +60,8 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/am57xx_hs_evm_defconfig

@@ -28,7 +28,6 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
 CONFIG_FASTBOOT_USB_DEV=1
@@ -73,7 +72,6 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022

configs/apalis-tk1_defconfig

@@ -47,9 +47,9 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0xffff
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0xffff
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/apalis_imx6_defconfig

@@ -55,11 +55,11 @@ CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_USB_HOST_ETHER=y
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/apalis_imx6_nospl_com_defconfig

@@ -44,11 +44,11 @@ CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4020
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4020
 CONFIG_USB_HOST_ETHER=y
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/apalis_imx6_nospl_it_defconfig

@@ -44,11 +44,11 @@ CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4020
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4020
 CONFIG_USB_HOST_ETHER=y
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/apalis_t30_defconfig

@@ -40,9 +40,9 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/bananapi_m1_plus_defconfig

@@ -0,0 +1,24 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
+CONFIG_VIDEO_COMPOSITE=y
+CONFIG_GMAC_TX_DELAY=3
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1-plus"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_NETCONSOLE=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_SCSI=y
+CONFIG_USB_EHCI_HCD=y

configs/bcm11130_defconfig

@@ -27,9 +27,9 @@ CONFIG_MMC_SDHCI_KONA=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Broadcom Corporation"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Broadcom Corporation"
-CONFIG_G_DNL_VENDOR_NUM=0x18d1
-CONFIG_G_DNL_PRODUCT_NUM=0x0d02

configs/bcm11130_nand_defconfig

@@ -27,9 +27,9 @@ CONFIG_NAND=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Broadcom Corporation"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Broadcom Corporation"
-CONFIG_G_DNL_VENDOR_NUM=0x18d1
-CONFIG_G_DNL_PRODUCT_NUM=0x0d02

configs/bcm23550_w1d_defconfig

@@ -7,8 +7,6 @@ CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x80000000
 CONFIG_FASTBOOT_BUF_SIZE=0x1D000000
 CONFIG_FASTBOOT_FLASH=y
@@ -34,11 +32,10 @@ CONFIG_MMC_SDHCI_KONA=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Broadcom Corporation"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02
 CONFIG_USB_GADGET_BCM_UDC_OTG_PHY=y
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Broadcom Corporation"
-CONFIG_G_DNL_VENDOR_NUM=0x18d1
-CONFIG_G_DNL_PRODUCT_NUM=0x0d02
 CONFIG_OF_LIBFDT=y

configs/bcm28155_ap_defconfig

@@ -8,8 +8,6 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTOBOOT is not set
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x80000000
 CONFIG_FASTBOOT_BUF_SIZE=0x7FF00000
 CONFIG_FASTBOOT_FLASH=y
@@ -35,11 +33,10 @@ CONFIG_MMC_SDHCI_KONA=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Broadcom Corporation"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02
 CONFIG_USB_GADGET_BCM_UDC_OTG_PHY=y
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Broadcom Corporation"
-CONFIG_G_DNL_VENDOR_NUM=0x18d1
-CONFIG_G_DNL_PRODUCT_NUM=0x0d02
 CONFIG_OF_LIBFDT=y

configs/bcm28155_w1d_defconfig

@@ -29,9 +29,9 @@ CONFIG_BCM_SF2_ETH_GMAC=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Broadcom Corporation"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0d02
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Broadcom Corporation"
-CONFIG_G_DNL_VENDOR_NUM=0x18d1
-CONFIG_G_DNL_PRODUCT_NUM=0x0d02

configs/beaver_defconfig

@@ -45,10 +45,10 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="NVIDIA"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0955
+CONFIG_USB_GADGET_PRODUCT_NUM=0x701a
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="NVIDIA"
-CONFIG_G_DNL_VENDOR_NUM=0x0955
-CONFIG_G_DNL_PRODUCT_NUM=0x701a
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y

configs/birdland_bav335a_defconfig

@@ -24,8 +24,6 @@ CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
@@ -66,10 +64,9 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT=y

configs/birdland_bav335b_defconfig

@@ -24,8 +24,6 @@ CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
@@ -66,10 +64,9 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y
 CONFIG_OF_LIBFDT=y

configs/cei-tk1-som_defconfig

@@ -48,10 +48,10 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="NVIDIA"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0955
+CONFIG_USB_GADGET_PRODUCT_NUM=0x701a
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="NVIDIA"
-CONFIG_G_DNL_VENDOR_NUM=0x0955
-CONFIG_G_DNL_PRODUCT_NUM=0x701a
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y

configs/cgtqmx6eval_defconfig

@@ -24,8 +24,6 @@ CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > "
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
@@ -57,11 +55,10 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Congatec"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Congatec"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 # CONFIG_VIDEO_SW_CURSOR is not set

configs/chromebit_mickey_defconfig

@@ -75,11 +75,10 @@ CONFIG_ROCKCHIP_SPI=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x320a
 CONFIG_DM_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y

configs/chromebook_jerry_defconfig

@@ -76,11 +76,10 @@ CONFIG_ROCKCHIP_SPI=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x320a
 CONFIG_DM_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y

configs/chromebook_minnie_defconfig

@@ -75,11 +75,10 @@ CONFIG_ROCKCHIP_SPI=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x320a
 CONFIG_DM_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y

configs/colibri_imx6_defconfig

@@ -53,11 +53,11 @@ CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_USB_HOST_ETHER=y
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/colibri_imx6_nospl_defconfig

@@ -42,11 +42,11 @@ CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_USB_HOST_ETHER=y
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT=y

configs/colibri_imx7_defconfig

@@ -56,10 +56,10 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_FDT_FIXUP_PARTITIONS=y

configs/colibri_t20_defconfig

@@ -47,11 +47,11 @@ CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_DM_VIDEO=y

configs/colibri_t30_defconfig

@@ -34,11 +34,11 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/colibri_vf_defconfig

@@ -54,11 +54,11 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Toradex"
-CONFIG_G_DNL_VENDOR_NUM=0x1b67
-CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_VIDEO_FSL_DCU_FB=y
 CONFIG_SYS_CONSOLE_FG_COL=0x00
 CONFIG_OF_LIBFDT_OVERLAY=y

configs/corvus_defconfig

@@ -49,9 +49,9 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0908
+CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Siemens AG"
-CONFIG_G_DNL_VENDOR_NUM=0x0908
-CONFIG_G_DNL_PRODUCT_NUM=0x02d2
 # CONFIG_EFI_LOADER is not set

configs/dalmore_defconfig

@@ -39,10 +39,10 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="NVIDIA"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0955
+CONFIG_USB_GADGET_PRODUCT_NUM=0x701a
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="NVIDIA"
-CONFIG_G_DNL_VENDOR_NUM=0x0955
-CONFIG_G_DNL_PRODUCT_NUM=0x701a
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y

configs/dms-ba16-1g_defconfig

@@ -38,10 +38,10 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Advantech"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Advantech"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 # CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_OF_LIBFDT=y

configs/dms-ba16_defconfig

@@ -37,10 +37,10 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Advantech"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Advantech"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 # CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_OF_LIBFDT=y

configs/dra7xx_evm_defconfig

@@ -23,7 +23,6 @@ CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
 CONFIG_FASTBOOT_FLASH=y
@@ -88,7 +87,6 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022

configs/dra7xx_hs_evm_defconfig

@@ -28,7 +28,6 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
 CONFIG_FASTBOOT_FLASH=y
@@ -90,7 +89,6 @@ CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022

configs/draco_defconfig

@@ -66,7 +66,8 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0908
+CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Siemens AG"
-CONFIG_G_DNL_VENDOR_NUM=0x0908
-CONFIG_G_DNL_PRODUCT_NUM=0x02d2
+CONFIG_USB_ETHER=y

configs/e2220-1170_defconfig

@@ -35,8 +35,8 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="NVIDIA"
-CONFIG_G_DNL_VENDOR_NUM=0x0955
-CONFIG_G_DNL_PRODUCT_NUM=0x701a
+CONFIG_USB_GADGET_MANUFACTURER="NVIDIA"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0955
+CONFIG_USB_GADGET_PRODUCT_NUM=0x701a
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y

configs/edison_defconfig

@@ -33,9 +33,9 @@ CONFIG_DM_PCI_COMPAT=y
 CONFIG_USB_DWC3_GADGET=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Intel"
-CONFIG_G_DNL_VENDOR_NUM=0x8087
-CONFIG_G_DNL_PRODUCT_NUM=0x0a99
+CONFIG_USB_GADGET_MANUFACTURER="Intel"
+CONFIG_USB_GADGET_VENDOR_NUM=0x8087
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0a99
 # CONFIG_USB_HOST_ETHER is not set
 CONFIG_FAT_WRITE=y
 CONFIG_SHA1=y

configs/etamin_defconfig

@@ -66,7 +66,8 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0908
+CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Siemens AG"
-CONFIG_G_DNL_VENDOR_NUM=0x0908
-CONFIG_G_DNL_PRODUCT_NUM=0x02d2
+CONFIG_USB_ETHER=y

configs/evb-rk3036_defconfig

@@ -44,11 +44,10 @@ CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x310a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x310a
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_CMD_DHRYSTONE=y
 CONFIG_ERRNO_STR=y

configs/evb-rk3229_defconfig

@@ -44,9 +44,8 @@ CONFIG_SYS_NS16550=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x320a
 CONFIG_ERRNO_STR=y

configs/evb-rk3288_defconfig

@@ -66,11 +66,10 @@ CONFIG_SYS_NS16550=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x320a
 CONFIG_DM_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y

configs/evb-rk3328_defconfig

@@ -53,8 +53,8 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x330a
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
 CONFIG_USE_TINY_PRINTF=y
 CONFIG_ERRNO_STR=y

configs/evb-rv1108_defconfig

@@ -13,6 +13,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x08000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=1
 # CONFIG_CMD_IMLS is not set
+CONFIG_RANDOM_UUID=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
@@ -51,7 +52,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x110a
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x110a
 CONFIG_ERRNO_STR=y

configs/fennec-rk3288_defconfig

@@ -69,11 +69,10 @@ CONFIG_USB=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x320a
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y

configs/firefly-rk3288_defconfig

@@ -74,11 +74,10 @@ CONFIG_USB_DWC2=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Rockchip"
-CONFIG_G_DNL_VENDOR_NUM=0x2207
-CONFIG_G_DNL_PRODUCT_NUM=0x320a
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y

configs/gwventana_emmc_defconfig

@@ -63,11 +63,13 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Gateworks"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Gateworks"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y

configs/gwventana_gw5904_defconfig

@@ -67,11 +67,13 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Gateworks"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Gateworks"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y

configs/gwventana_nand_defconfig

@@ -66,11 +66,13 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Gateworks"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Gateworks"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_SMSC95XX=y

configs/h2200_defconfig

@@ -29,3 +29,6 @@ CONFIG_CMD_PING=y
 # CONFIG_CMD_MISC is not set
 # CONFIG_MMC is not set
 CONFIG_PXA_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETHER=y

configs/jetson-tk1_defconfig

@@ -49,10 +49,10 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="NVIDIA"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0955
+CONFIG_USB_GADGET_PRODUCT_NUM=0x701a
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="NVIDIA"
-CONFIG_G_DNL_VENDOR_NUM=0x0955
-CONFIG_G_DNL_PRODUCT_NUM=0x701a
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y

configs/kc1_defconfig

@@ -12,8 +12,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="kc1 # "
 CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_FASTBOOT_BUF_SIZE=0x2000000
 CONFIG_FASTBOOT_FLASH=y
@@ -42,8 +40,7 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
-CONFIG_G_DNL_VENDOR_NUM=0x0451
-CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
 CONFIG_OF_LIBFDT=y