armv8: ls2080a: Drop macro CONFIG_LS2080A

Use CONFIG_ARCH_LS2080A instead.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/arm/cpu/armv8/fsl-layerscape/Makefile

@@ -22,7 +22,7 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
 endif
 endif
 
-ifneq ($(CONFIG_LS2080A),)
+ifneq ($(CONFIG_ARCH_LS2080A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
 endif
 

arch/arm/cpu/armv8/fsl-layerscape/cpu.c

@@ -92,7 +92,7 @@ static inline void early_mmu_setup(void)
 
 static void fix_pcie_mmu_map(void)
 {
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	unsigned int i;
 	u32 svr, ver;
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -523,7 +523,7 @@ int timer_init(void)
 #ifdef CONFIG_FSL_LSCH3
 	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
 #endif
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
 	u32 svr_dev_id;
 #endif
@@ -541,7 +541,7 @@ int timer_init(void)
 	out_le32(cltbenr, 0xf);
 #endif
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	/*
 	 * In certain Layerscape SoCs, the clock for each core's
 	 * has an enable bit in the PMU Physical Core Time Base Enable

arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S

@@ -76,7 +76,7 @@ ENTRY(lowlevel_init)
 #ifdef CONFIG_FSL_LSCH3
 
 	/* Set Wuo bit for RN-I 20 */
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
 	ldr	x1, =0x00000010
 	bl	ccn504_set_aux

arch/arm/cpu/armv8/fsl-layerscape/spl.c

@@ -65,7 +65,7 @@ void board_init_f(ulong dummy)
 	memset((void *)gd, 0, sizeof(gd_t));
 	board_early_init_f();
 	timer_init();
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	env_init();
 #endif
 	get_clocks();

arch/arm/include/asm/arch-fsl-layerscape/config.h

@@ -18,7 +18,7 @@
  */
 #define CONFIG_SYS_MEM_RESERVE_SECURE	(2048 * 1024)	/* 2MB */
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
 #define	SRDS_MAX_LANES	8
 #define CONFIG_SYS_PAGE_SIZE		0x10000

arch/arm/include/asm/arch-fsl-layerscape/cpu.h

@@ -249,7 +249,7 @@ static struct mm_region final_map[] = {
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
 	  CONFIG_SYS_PCIE4_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |

arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h

@@ -9,7 +9,7 @@
 
 #include <config.h>
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 enum srds_prtcl {
 	/*
 	 * Nobody will check whether the device 'NONE' has been configured,

arch/arm/include/asm/fsl_secure_boot.h

@@ -55,7 +55,7 @@
 #define CONFIG_ESBC_ADDR_64BIT
 #endif
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 #define CONFIG_EXTRA_ENV \
 	"setenv fdt_high 0xa0000000;"	\
 	"setenv initrd_high 0xcfffffff;"	\

configs/ls2080a_emu_defconfig

@@ -5,7 +5,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="EMU,LS2080A"
+CONFIG_SYS_EXTRA_OPTIONS="EMU"
 CONFIG_BOOTDELAY=10
 # CONFIG_DISPLAY_BOARDINFO is not set
 # CONFIG_CMD_CONSOLE is not set

configs/ls2080a_simu_defconfig

@@ -5,7 +5,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SIMU, LS2080A"
+CONFIG_SYS_EXTRA_OPTIONS="SIMU"
 CONFIG_BOOTDELAY=10
 # CONFIG_DISPLAY_BOARDINFO is not set
 # CONFIG_CMD_CONSOLE is not set

configs/ls2080aqds_SECURE_BOOT_defconfig

@@ -7,7 +7,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y

configs/ls2080aqds_defconfig

@@ -7,7 +7,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y

configs/ls2080aqds_nand_defconfig

@@ -10,7 +10,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_ENV_SUPPORT=y

configs/ls2080aqds_qspi_defconfig

@@ -5,7 +5,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT,LS2080A"
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_CMD_GREPENV=y

configs/ls2080ardb_SECURE_BOOT_defconfig

@@ -7,7 +7,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y

configs/ls2080ardb_defconfig

@@ -7,7 +7,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y

configs/ls2080ardb_nand_defconfig

@@ -10,7 +10,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_ENV_SUPPORT=y

drivers/crypto/fsl/jr.c

@@ -587,7 +587,7 @@ int sec_init_idx(uint8_t sec_idx)
 	 * For AXI Read - Cacheable, Read allocate
 	 * Only For LS2080a, to solve CAAM coherency issues
 	 */
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT);
 	mcr = (mcr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT);
 #else

drivers/net/ldpaa_eth/Makefile

@@ -6,4 +6,4 @@
 
 obj-y += ldpaa_wriop.o
 obj-y += ldpaa_eth.o
-obj-$(CONFIG_LS2080A) += ls2080a.o
+obj-$(CONFIG_ARCH_LS2080A) += ls2080a.o

include/linux/usb/xhci-fsl.h

@@ -58,7 +58,7 @@ struct fsl_xhci {
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS2080A)
+#elif defined(CONFIG_ARCH_LS2080A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0

scripts/config_whitelist.txt

@@ -1700,7 +1700,6 @@ CONFIG_LQ038J7DH53
 CONFIG_LS102XA
 CONFIG_LS102XA_STREAM_ID
 CONFIG_LS1043A
-CONFIG_LS2080A
 CONFIG_LSCHLV2
 CONFIG_LSXHL
 CONFIG_LUAN