configs: remove CONFIG_NET_MULTI

CONFIG_NET_MULTI is not used anywhere and thus can safely be removed
from the configs.

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>

include/configs/B4860QDS.h

@@ -719,7 +719,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_E1000
 

include/configs/C29XPCIE.h

@@ -440,7 +440,6 @@
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 
 #ifdef CONFIG_TSEC_ENET
-#define CONFIG_NET_MULTI
 #define CONFIG_MII			/* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_TSEC1		1

include/configs/M54418TWR.h

@@ -78,7 +78,6 @@
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#define CONFIG_NET_MULTI		1
 #define CONFIG_MII			1
 #define CONFIG_MII_INIT		1
 #define CONFIG_SYS_DISCOVER_PHY

include/configs/T208xQDS.h

@@ -620,7 +620,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET	   /* need PCIe reset errata */
-#define CONFIG_NET_MULTI
 #define CONFIG_E1000
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */

include/configs/T208xRDB.h

@@ -568,7 +568,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
-#define CONFIG_NET_MULTI
 #define CONFIG_E1000
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */

include/configs/T4240RDB.h

@@ -277,7 +277,6 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_E1000
 

include/configs/ac14xx.h

@@ -372,7 +372,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC		1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR			0x1F
 #define CONFIG_MII			1	/* MII PHY management */
 #define CONFIG_FEC_AN_TIMEOUT		1

include/configs/adp-ag102.h

@@ -81,7 +81,6 @@
 /*
  * Ethernet
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_MAX_ADDR	32	/* this comes from <linux/phy.h> */
 #define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_FTGMAC100

include/configs/alt.h

@@ -49,7 +49,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define	CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT	0
 #define CONFIG_SH_ETHER_PHY_ADDR	0x1

include/configs/am43xx_evm.h

@@ -318,7 +318,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT		10
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 

include/configs/apx4devkit.h

@@ -87,7 +87,6 @@
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define IMX_FEC_BASE			MXS_ENET0_BASE

include/configs/armadillo-800eva.h

@@ -120,7 +120,6 @@
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
 
 /* SH Ether */
-#define	CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT	0
 #define CONFIG_SH_ETHER_PHY_ADDR	0x0

include/configs/atngw100mkii.h

@@ -100,7 +100,6 @@
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options

include/configs/axs101.h

@@ -117,7 +117,6 @@
  * Ethernet configuration
  */
 #define CONFIG_DW_AUTONEG
-#define CONFIG_NET_MULTI
 
 /*
  * Command line configuration

include/configs/bf609-ezkit.h

@@ -69,7 +69,6 @@
  */
 #define ADI_CMDS_NETWORK
 #define CONFIG_NETCONSOLE
-#define CONFIG_NET_MULTI
 #define CONFIG_HOSTNAME		"bf609-ezkit"
 #define CONFIG_PHY_ADDR		1
 #define CONFIG_DW_PORTS		1

include/configs/bg0900.h

@@ -42,7 +42,6 @@
 /* FEC Ethernet on SoC */
 #ifdef	CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #endif
 
 /* SPI */

include/configs/edb93xx.h

@@ -142,7 +142,6 @@
 #define CONFIG_MII_SUPPRESS_PREAMBLE
 #define CONFIG_MII
 #define CONFIG_PHY_ADDR		1
-#define CONFIG_NET_MULTI
 #undef CONFIG_NETCONSOLE
 
 /* SDRAM configuration */

include/configs/gose.h

@@ -49,7 +49,6 @@
 #define CONFIG_SPI_FLASH_SPANSION
 
 /* SH Ether */
-#define	CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT	0
 #define CONFIG_SH_ETHER_PHY_ADDR	0x1

include/configs/ids8313.h

@@ -171,7 +171,6 @@
 #define CONFIG_TSEC1
 #define CONFIG_TSEC2
 #define CONFIG_TSEC_ENET
-#define CONFIG_NET_MULTI
 #define CONFIG_HARD_SPI
 #define CONFIG_HARD_I2C
 

include/configs/ima3-mx53.h

@@ -46,7 +46,6 @@
 #define CONFIG_DOS_PARTITION
 
 /* Ethernet on FEC */
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 
 #define CONFIG_FEC_MXC

include/configs/integratorap.h

@@ -68,7 +68,6 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI
 #define CONFIG_TULIP
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/

include/configs/koelsch.h

@@ -49,7 +49,6 @@
 #define CONFIG_SPI_FLASH_SPANSION
 
 /* SH Ether */
-#define	CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT	0
 #define CONFIG_SH_ETHER_PHY_ADDR	0x1

include/configs/ks2_evm.h

@@ -98,7 +98,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT		32
-#define CONFIG_NET_MULTI
 #define CONFIG_SYS_SGMII_REFCLK_MHZ	312
 #define CONFIG_SYS_SGMII_LINERATE_MHZ	1250
 #define CONFIG_SYS_SGMII_RATESCALE	2

include/configs/kzm9g.h

@@ -127,7 +127,6 @@
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
 
 /* Ether */
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_SMC911X

include/configs/lager.h

@@ -49,7 +49,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define	CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT	0
 #define CONFIG_SH_ETHER_PHY_ADDR	0x1

include/configs/ls1021aqds.h

@@ -526,7 +526,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW

include/configs/ls1021atwr.h

@@ -343,7 +343,6 @@
 #define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW

include/configs/ls2085aqds.h

@@ -304,7 +304,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW

include/configs/ls2085ardb.h

@@ -269,7 +269,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW

include/configs/mx28evk.h

@@ -105,7 +105,6 @@
 /* FEC Ethernet on SoC */
 #ifdef	CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
 #endif
 

include/configs/omapl138_lcdk.h

@@ -191,7 +191,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT	10
-#define CONFIG_NET_MULTI
 #endif
 
 /*

include/configs/p1_twr.h

@@ -302,7 +302,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	/* do pci plug-and-play */
 #define CONFIG_E1000	/* Defind e1000 pci Ethernet card*/
 #define CONFIG_CMD_PCI
@@ -313,10 +312,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 #define CONFIG_MII		/* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME	"eTSEC1"

include/configs/pcm051.h

@@ -163,7 +163,6 @@
 #define CONFIG_USB_ETH_RNDIS
 #endif /* CONFIG_MUSB_GADGET */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC

include/configs/porter.h

@@ -50,7 +50,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define	CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT	0
 #define CONFIG_SH_ETHER_PHY_ADDR	0x1

include/configs/qemu-ppce500.h

@@ -135,7 +135,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_E1000
 

include/configs/sama5d3_xplained.h

@@ -74,7 +74,6 @@
 /* Ethernet Hardware */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 #define CONFIG_RGMII

include/configs/siemens-am33x-common.h

@@ -304,7 +304,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_NET_MULTI
 
 #define CONFIG_NAND
 /* NAND support */

include/configs/silk.h

@@ -50,7 +50,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* SH Ether */
-#define	CONFIG_NET_MULTI
 #define CONFIG_SH_ETHER
 #define CONFIG_SH_ETHER_USE_PORT	0
 #define CONFIG_SH_ETHER_PHY_ADDR	0x1

include/configs/socfpga_common.h

@@ -97,7 +97,6 @@
  * Ethernet on SoC (EMAC)
  */
 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
-#define CONFIG_NET_MULTI
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_MII
 #define CONFIG_AUTONEG_TIMEOUT		(15 * CONFIG_SYS_HZ)

include/configs/spear-common.h

@@ -18,7 +18,6 @@
 
 /* Ethernet driver configuration */
 #define CONFIG_MII
-#define CONFIG_NET_MULTI
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */

include/configs/t4qds.h

@@ -232,7 +232,6 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_E1000
 

include/configs/ti814x_evm.h

@@ -227,7 +227,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ET1011C

include/configs/vl_ma2sc.h

@@ -325,7 +325,6 @@
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT		5
 #define CONFIG_AT91_WANTS_COMMON_PHY
 

include/configs/x600.h

@@ -74,7 +74,6 @@
 
 /* Ethernet config options */
 #define CONFIG_MII
-#define CONFIG_NET_MULTI
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_ADDR		0	/* PHY address */

include/configs/zynq-common.h

@@ -48,7 +48,6 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
-# define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN