|
@@ -17,56 +17,6 @@
|
|
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
-/*
|
|
|
- * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH
|
|
|
- * which CFI does not properly detect, hence the LEGACY config.
|
|
|
- */
|
|
|
-#if defined(CONFIG_FLASH_CFI_LEGACY)
|
|
|
-#include <flash.h>
|
|
|
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
|
|
|
-{
|
|
|
- int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
|
|
|
- int sect;
|
|
|
-
|
|
|
- if (base != CONFIG_SYS_FLASH_BASE)
|
|
|
- return 0;
|
|
|
-
|
|
|
- info->size = 0;
|
|
|
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
|
- /* set each sector's start address and size based */
|
|
|
- for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) {
|
|
|
- info->start[sect] = base+info->size;
|
|
|
- info->size += sectsz[sect];
|
|
|
- }
|
|
|
- /* This flash must be accessed in 8-bits mode, no buffer. */
|
|
|
- info->flash_id = 0x01000000;
|
|
|
- info->portwidth = FLASH_CFI_8BIT;
|
|
|
- info->chipwidth = FLASH_CFI_BY8;
|
|
|
- info->buffer_size = 0;
|
|
|
- /* timings are derived from the Macronix datasheet. */
|
|
|
- info->erase_blk_tout = 1000;
|
|
|
- info->write_tout = 10;
|
|
|
- info->buffer_write_tout = 300;
|
|
|
- /* Commands and addresses are for AMD mode 8-bit access. */
|
|
|
- info->vendor = CFI_CMDSET_AMD_LEGACY;
|
|
|
- info->cmd_reset = 0xF0;
|
|
|
- info->interface = FLASH_CFI_X8;
|
|
|
- info->legacy_unlock = 0;
|
|
|
- info->ext_addr = 0;
|
|
|
- info->addr_unlock1 = 0x00000aaa;
|
|
|
- info->addr_unlock2 = 0x00000555;
|
|
|
- /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */
|
|
|
- info->manufacturer_id = 0x22;
|
|
|
- info->device_id = 0xBA;
|
|
|
- info->device_id2 = 0;
|
|
|
- info->cfi_version = 0x3133;
|
|
|
- info->cfi_offset = 0x0000;
|
|
|
- info->name = "MX29LV400CB";
|
|
|
-
|
|
|
- return 1;
|
|
|
-}
|
|
|
-#endif /* CONFIG_SYS_FLASH_CFI */
|
|
|
-
|
|
|
int board_init(void)
|
|
|
{
|
|
|
/* arch number of board */
|