|
|
@@ -1,238 +0,0 @@
|
|
|
-/*
|
|
|
- * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
|
|
|
- *
|
|
|
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
|
|
|
- *
|
|
|
- * Configuration settings for the MX53-EVK Freescale board.
|
|
|
- *
|
|
|
- * SPDX-License-Identifier: GPL-2.0+
|
|
|
- */
|
|
|
-
|
|
|
-#ifndef __CONFIG_H
|
|
|
-#define __CONFIG_H
|
|
|
-
|
|
|
-/* SOC type must be included before imx-regs.h */
|
|
|
-#define CONFIG_MX53
|
|
|
-#include <asm/arch/imx-regs.h>
|
|
|
-
|
|
|
-#define CONFIG_DISPLAY_CPUINFO
|
|
|
-#define CONFIG_DISPLAY_BOARDINFO
|
|
|
-
|
|
|
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
|
-#define CONFIG_SETUP_MEMORY_TAGS
|
|
|
-#define CONFIG_INITRD_TAG
|
|
|
-
|
|
|
-#define CONFIG_OF_LIBFDT
|
|
|
-
|
|
|
-/* Size of malloc() pool */
|
|
|
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
|
|
|
-
|
|
|
-#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
-
|
|
|
-/* Enable GPIOs */
|
|
|
-#define CONFIG_MXC_GPIO
|
|
|
-
|
|
|
-/* UART */
|
|
|
-#define CONFIG_MXC_UART
|
|
|
-#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR
|
|
|
-
|
|
|
-/* MMC */
|
|
|
-#define CONFIG_FSL_ESDHC
|
|
|
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
-
|
|
|
-#define CONFIG_MMC
|
|
|
-#define CONFIG_GENERIC_MMC
|
|
|
-#define CONFIG_DOS_PARTITION
|
|
|
-
|
|
|
-/* Ethernet on FEC */
|
|
|
-#define CONFIG_MII
|
|
|
-
|
|
|
-#define CONFIG_FEC_MXC
|
|
|
-#define IMX_FEC_BASE FEC_BASE_ADDR
|
|
|
-#define CONFIG_FEC_MXC_PHYADDR 0x01
|
|
|
-#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR
|
|
|
-#define CONFIG_RESET_PHY_R
|
|
|
-#define CONFIG_FEC_MXC_NO_ANEG
|
|
|
-#define CONFIG_ETHPRIME "FEC0"
|
|
|
-
|
|
|
-/* SPI */
|
|
|
-#define CONFIG_HARD_SPI
|
|
|
-#define CONFIG_MXC_SPI
|
|
|
-#define CONFIG_DEFAULT_SPI_BUS 1
|
|
|
-#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
|
|
|
-
|
|
|
-/* SPI FLASH - not used for environment */
|
|
|
-#define CONFIG_SPI_FLASH_STMICRO
|
|
|
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
|
-#define CONFIG_SF_DEFAULT_SPEED 25000000
|
|
|
-
|
|
|
-/* allow to overwrite serial and ethaddr */
|
|
|
-#define CONFIG_ENV_OVERWRITE
|
|
|
-#define CONFIG_CONS_INDEX 1
|
|
|
-#define CONFIG_BAUDRATE 115200
|
|
|
-
|
|
|
-/* Command definition */
|
|
|
-#define CONFIG_CMD_PING
|
|
|
-#define CONFIG_CMD_DHCP
|
|
|
-#define CONFIG_CMD_MII
|
|
|
-#define CONFIG_CMD_MMC
|
|
|
-#define CONFIG_CMD_FAT
|
|
|
-#define CONFIG_CMD_EXT2
|
|
|
-#define CONFIG_CMD_MTDPARTS
|
|
|
-#define CONFIG_CMD_SPI
|
|
|
-#define CONFIG_CMD_SF
|
|
|
-#define CONFIG_CMD_GPIO
|
|
|
-
|
|
|
-#define CONFIG_BOOTDELAY 3
|
|
|
-
|
|
|
-#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
|
|
|
-#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */
|
|
|
-
|
|
|
-#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
-
|
|
|
-/* Miscellaneous configurable options */
|
|
|
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
|
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
|
-#define CONFIG_AUTO_COMPLETE
|
|
|
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
-
|
|
|
-/* Print Buffer Size */
|
|
|
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
|
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
-
|
|
|
-#define CONFIG_SYS_MEMTEST_START 0x70000000
|
|
|
-#define CONFIG_SYS_MEMTEST_END 0x10000
|
|
|
-
|
|
|
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
-
|
|
|
-#define CONFIG_CMDLINE_EDITING
|
|
|
-
|
|
|
-/* Physical Memory Map */
|
|
|
-#define CONFIG_NR_DRAM_BANKS 1
|
|
|
-#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
|
|
-#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
|
|
|
-
|
|
|
-#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
|
|
|
-#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
|
|
|
-#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
|
|
|
-
|
|
|
-#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
|
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
-#define CONFIG_SYS_INIT_SP_ADDR \
|
|
|
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
-
|
|
|
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
|
-#define MTDIDS_DEFAULT "nor0=f0000000.flash"
|
|
|
-
|
|
|
-/* FLASH and environment organization */
|
|
|
-
|
|
|
-#define CONFIG_SYS_FLASH_BASE 0xF0000000
|
|
|
-#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */
|
|
|
-#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
|
|
|
-#define CONFIG_FLASH_CFI_MTD /* with MTD support */
|
|
|
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
|
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
|
-#define CONFIG_SYS_MAX_FLASH_SECT 1024
|
|
|
-
|
|
|
-#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
|
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
-
|
|
|
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
|
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
|
-
|
|
|
-#define CONFIG_ENV_SIZE (8 * 1024)
|
|
|
-#define CONFIG_ENV_IS_IN_FLASH
|
|
|
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
|
|
|
- CONFIG_SYS_MONITOR_LEN)
|
|
|
-#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
|
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
|
|
|
- CONFIG_ENV_SECT_SIZE)
|
|
|
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
-
|
|
|
-/*
|
|
|
- * Default environment and default scripts
|
|
|
- * to update uboot and load kernel
|
|
|
- */
|
|
|
-
|
|
|
-#define HOSTNAME ima3-mx53
|
|
|
-
|
|
|
-#define CONFIG_HOSTNAME ima3-mx53
|
|
|
-#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
|
- "netdev=eth0\0" \
|
|
|
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
|
- "nfsroot=${serverip}:${rootpath}\0" \
|
|
|
- "ramargs=setenv bootargs root=/dev/ram0 rw\0" \
|
|
|
- "addip_sta=setenv bootargs ${bootargs} " \
|
|
|
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
|
- ":${hostname}:${netdev}:off panic=1\0" \
|
|
|
- "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
|
|
|
- "addip=if test -n ${ipdyn};then run addip_dyn;" \
|
|
|
- "else run addip_sta;fi\0" \
|
|
|
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
|
- "addtty=setenv bootargs ${bootargs}" \
|
|
|
- " console=${console},${baudrate}\0" \
|
|
|
- "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
|
|
|
- "console=ttymxc3\0" \
|
|
|
- "loadaddr=70800000\0" \
|
|
|
- "kernel_addr_r=70800000\0" \
|
|
|
- "ramdisk_addr_r=71000000\0" \
|
|
|
- "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
|
|
|
- "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
|
|
|
- "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
|
|
|
- "mmcargs=setenv bootargs root=${mmcroot} " \
|
|
|
- "rootfstype=${mmcrootfstype}\0" \
|
|
|
- "mmcroot=/dev/mmcblk0p3 rw\0" \
|
|
|
- "mmcboot=echo Booting from mmc ...; " \
|
|
|
- "run mmcargs addip addtty addmtd addmisc mmcload;" \
|
|
|
- "bootm\0" \
|
|
|
- "mmcload=fatload mmc ${mmcdev}:${mmcpart} " \
|
|
|
- "${loadaddr} ${uimage}\0" \
|
|
|
- "mmcrootfstype=ext3 rootwait\0" \
|
|
|
- "flash_self=run ramargs addip addtty addmtd addmisc;" \
|
|
|
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
|
- "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
|
|
|
- "bootm ${kernel_addr}\0" \
|
|
|
- "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
|
|
- "run nfsargs addip addtty addmtd addmisc;" \
|
|
|
- "bootm ${kernel_addr_r}\0" \
|
|
|
- "net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \
|
|
|
- "tftp ${kernel_addr_r} ${bootfile}\0" \
|
|
|
- "net_self=if run net_self_load;then " \
|
|
|
- "run ramargs addip addtty addmtd addmisc;" \
|
|
|
- "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
|
|
|
- "else echo Images not loades;fi\0" \
|
|
|
- "satargs=setenv bootargs root=/dev/sda1\0" \
|
|
|
- "satafile=boot/uImage\0" \
|
|
|
- "ssdboot=echo Booting from ssd ...; " \
|
|
|
- "run satargs addip addtty addmtd addmisc;" \
|
|
|
- "sata init;ext2load sata 0:1 ${kernel_addr_r} " \
|
|
|
- "${satafile};bootm\0" \
|
|
|
- "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \
|
|
|
- "uimage=uImage\0" \
|
|
|
- "load=tftp ${loadaddr} ${u-boot}\0" \
|
|
|
- "uboot_addr=0xf0001000\0" \
|
|
|
- "update=protect off 0xf0000000 +60000;" \
|
|
|
- "erase ${uboot_addr} +60000;" \
|
|
|
- "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
|
|
|
- "upd=if run load;then echo Updating u-boot;if run update;" \
|
|
|
- "then echo U-Boot updated;" \
|
|
|
- "else echo Error updating u-boot !;" \
|
|
|
- "echo Board without bootloader !!;" \
|
|
|
- "fi;" \
|
|
|
- "else echo U-Boot not downloaded..exiting;fi\0" \
|
|
|
- "bootcmd=run net_nfs\0"
|
|
|
-
|
|
|
-
|
|
|
-#define CONFIG_CMD_SATA
|
|
|
-#ifdef CONFIG_CMD_SATA
|
|
|
- #define CONFIG_DWC_AHSATA
|
|
|
- #define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
|
- #define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
|
- #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
|
|
|
- #define CONFIG_LBA48
|
|
|
- #define CONFIG_LIBATA
|
|
|
-#endif
|
|
|
-
|
|
|
-#endif /* __CONFIG_H */
|
Simon Glass