x86: ivybridge: Add SATA init

Add code to set up the SATA interfaces on boot.

Signed-off-by: Simon Glass <sjg@chromium.org>

arch/x86/cpu/ivybridge/Makefile

@@ -15,4 +15,5 @@ obj-y += microcode_intel.o
 obj-y += pch.o
 obj-y += pci.o
 obj-y += report_platform.o
+obj-y += sata.o
 obj-y += sdram.o

arch/x86/cpu/ivybridge/bd82x6x.c

@@ -88,18 +88,38 @@ void bd82x6x_pci_bus_enable_resources(pci_dev_t dev)
 
 int bd82x6x_init_pci_devices(void)
 {
+	const void *blob = gd->fdt_blob;
 	struct pci_controller *hose;
+	int sata_node;
 
 	hose = pci_bus_to_hose(0);
 	lpc_enable(PCH_LPC_DEV);
 	lpc_init(hose, PCH_LPC_DEV);
+	sata_node = fdtdec_next_compatible(blob, 0,
+					   COMPAT_INTEL_PANTHERPOINT_AHCI);
+	if (sata_node < 0) {
+		debug("%s: Cannot find SATA node\n", __func__);
+		return -EINVAL;
+	}
+	bd82x6x_sata_init(PCH_SATA_DEV, blob, sata_node);
 
 	return 0;
 }
 
 int bd82x6x_init(void)
 {
+	const void *blob = gd->fdt_blob;
+	int sata_node;
+
+	sata_node = fdtdec_next_compatible(blob, 0,
+					   COMPAT_INTEL_PANTHERPOINT_AHCI);
+	if (sata_node < 0) {
+		debug("%s: Cannot find SATA node\n", __func__);
+		return -EINVAL;
+	}
+
 	bd82x6x_pci_init(PCH_DEV);
+	bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node);
 
 	return 0;
 }

arch/x86/cpu/ivybridge/sata.c

@@ -0,0 +1,225 @@
+/*
+ * From Coreboot
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/bd82x6x.h>
+
+static inline u32 sir_read(pci_dev_t dev, int idx)
+{
+	pci_write_config32(dev, SATA_SIRI, idx);
+	return pci_read_config32(dev, SATA_SIRD);
+}
+
+static inline void sir_write(pci_dev_t dev, int idx, u32 value)
+{
+	pci_write_config32(dev, SATA_SIRI, idx);
+	pci_write_config32(dev, SATA_SIRD, value);
+}
+
+static void common_sata_init(pci_dev_t dev, unsigned int port_map)
+{
+	u32 reg32;
+	u16 reg16;
+
+	/* Set IDE I/O Configuration */
+	reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+	pci_write_config32(dev, IDE_CONFIG, reg32);
+
+	/* Port enable */
+	reg16 = pci_read_config16(dev, 0x92);
+	reg16 &= ~0x3f;
+	reg16 |= port_map;
+	pci_write_config16(dev, 0x92, reg16);
+
+	/* SATA Initialization register */
+	port_map &= 0xff;
+	pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
+}
+
+void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
+{
+	unsigned int port_map, speed_support, port_tx;
+	struct pci_controller *hose = pci_bus_to_hose(0);
+	const char *mode;
+	u32 reg32;
+	u16 reg16;
+
+	debug("SATA: Initializing...\n");
+
+	/* SATA configuration */
+	port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
+	speed_support = fdtdec_get_int(blob, node,
+				       "sata_interface_speed_support", 0);
+
+	/* Enable BARs */
+	pci_write_config16(dev, PCI_COMMAND, 0x0007);
+
+	mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
+	if (!mode || !strcmp(mode, "ahci")) {
+		u32 abar;
+
+		debug("SATA: Controller in AHCI mode\n");
+
+		/* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */
+		pci_write_config8(dev, INTR_LN, 0x0a);
+
+		/* Set timings */
+		pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+		pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+				IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
+
+		/* Sync DMA */
+		pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+		pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+
+		common_sata_init(dev, 0x8000 | port_map);
+
+		/* Initialize AHCI memory-mapped space */
+		abar = pci_read_bar32(hose, dev, 5);
+		debug("ABAR: %08X\n", abar);
+		/* CAP (HBA Capabilities) : enable power management */
+		reg32 = readl(abar + 0x00);
+		reg32 |= 0x0c006000;  /* set PSC+SSC+SALP+SSS */
+		reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
+		/* Set ISS, if available */
+		if (speed_support) {
+			reg32 &= ~0x00f00000;
+			reg32 |= (speed_support & 0x03) << 20;
+		}
+		writel(reg32, abar + 0x00);
+		/* PI (Ports implemented) */
+		writel(port_map, abar + 0x0c);
+		(void) readl(abar + 0x0c); /* Read back 1 */
+		(void) readl(abar + 0x0c); /* Read back 2 */
+		/* CAP2 (HBA Capabilities Extended)*/
+		reg32 = readl(abar + 0x24);
+		reg32 &= ~0x00000002;
+		writel(reg32, abar + 0x24);
+		/* VSP (Vendor Specific Register */
+		reg32 = readl(abar + 0xa0);
+		reg32 &= ~0x00000005;
+		writel(reg32, abar + 0xa0);
+	} else if (!strcmp(mode, "combined")) {
+		debug("SATA: Controller in combined mode\n");
+
+		/* No AHCI: clear AHCI base */
+		pci_write_bar32(hose, dev, 5, 0x00000000);
+		/* And without AHCI BAR no memory decoding */
+		reg16 = pci_read_config16(dev, PCI_COMMAND);
+		reg16 &= ~PCI_COMMAND_MEMORY;
+		pci_write_config16(dev, PCI_COMMAND, reg16);
+
+		pci_write_config8(dev, 0x09, 0x80);
+
+		/* Set timings */
+		pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+				IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
+		pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+
+		/* Sync DMA */
+		pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
+		pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
+
+		common_sata_init(dev, port_map);
+	} else {
+		debug("SATA: Controller in plain-ide mode\n");
+
+		/* No AHCI: clear AHCI base */
+		pci_write_bar32(hose, dev, 5, 0x00000000);
+
+		/* And without AHCI BAR no memory decoding */
+		reg16 = pci_read_config16(dev, PCI_COMMAND);
+		reg16 &= ~PCI_COMMAND_MEMORY;
+		pci_write_config16(dev, PCI_COMMAND, reg16);
+
+		/*
+		 * Native mode capable on both primary and secondary (0xa)
+		 * OR'ed with enabled (0x50) = 0xf
+		 */
+		pci_write_config8(dev, 0x09, 0x8f);
+
+		/* Set Interrupt Line */
+		/* Interrupt Pin is set by D31IP.PIP */
+		pci_write_config8(dev, INTR_LN, 0xff);
+
+		/* Set timings */
+		pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
+				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
+		pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+				IDE_SITRE | IDE_ISP_3_CLOCKS |
+				IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
+
+		/* Sync DMA */
+		pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
+		pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
+
+		common_sata_init(dev, port_map);
+	}
+
+	/* Set Gen3 Transmitter settings if needed */
+	port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
+	if (port_tx)
+		pch_iobp_update(SATA_IOBP_SP0G3IR, 0, port_tx);
+
+	port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
+	if (port_tx)
+		pch_iobp_update(SATA_IOBP_SP1G3IR, 0, port_tx);
+
+	/* Additional Programming Requirements */
+	sir_write(dev, 0x04, 0x00001600);
+	sir_write(dev, 0x28, 0xa0000033);
+	reg32 = sir_read(dev, 0x54);
+	reg32 &= 0xff000000;
+	reg32 |= 0x5555aa;
+	sir_write(dev, 0x54, reg32);
+	sir_write(dev, 0x64, 0xcccc8484);
+	reg32 = sir_read(dev, 0x68);
+	reg32 &= 0xffff0000;
+	reg32 |= 0xcccc;
+	sir_write(dev, 0x68, reg32);
+	reg32 = sir_read(dev, 0x78);
+	reg32 &= 0x0000ffff;
+	reg32 |= 0x88880000;
+	sir_write(dev, 0x78, reg32);
+	sir_write(dev, 0x84, 0x001c7000);
+	sir_write(dev, 0x88, 0x88338822);
+	sir_write(dev, 0xa0, 0x001c7000);
+	sir_write(dev, 0xc4, 0x0c0c0c0c);
+	sir_write(dev, 0xc8, 0x0c0c0c0c);
+	sir_write(dev, 0xd4, 0x10000000);
+
+	pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000);
+	pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100);
+}
+
+void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node)
+{
+	unsigned port_map;
+	const char *mode;
+	u16 map = 0;
+
+	/*
+	 * Set SATA controller mode early so the resource allocator can
+	 * properly assign IO/Memory resources for the controller.
+	 */
+	mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
+	if (mode && !strcmp(mode, "ahci"))
+		map = 0x0060;
+	port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
+
+	map |= (port_map ^ 0x3f) << 8;
+	pci_write_config16(dev, 0x90, map);
+}

arch/x86/include/asm/arch-ivybridge/bd82x6x.h

@@ -7,6 +7,8 @@
 #ifndef _ASM_ARCH_BD82X6X_H
 #define _ASM_ARCH_BD82X6X_H
 
+void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node);
+void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node);
 void bd82x6x_pci_init(pci_dev_t dev);
 int bd82x6x_init_pci_devices(void);
 int bd82x6x_init(void);

arch/x86/include/asm/arch-ivybridge/pch.h

@@ -122,6 +122,64 @@ void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
 #define LPC_GEN4_DEC		0x90 /* LPC IF Generic Decode Range 4 */
 #define LPC_GENX_DEC(x)		(0x84 + 4 * (x))
 
+/* PCI Configuration Space (D31:F1): IDE */
+#define PCH_IDE_DEV		PCI_BDF(0, 0x1f, 1)
+#define PCH_SATA_DEV		PCI_BDF(0, 0x1f, 2)
+#define PCH_SATA2_DEV		PCI_BDF(0, 0x1f, 5)
+
+#define INTR_LN			0x3c
+#define IDE_TIM_PRI		0x40	/* IDE timings, primary */
+#define   IDE_DECODE_ENABLE	(1 << 15)
+#define   IDE_SITRE		(1 << 14)
+#define   IDE_ISP_5_CLOCKS	(0 << 12)
+#define   IDE_ISP_4_CLOCKS	(1 << 12)
+#define   IDE_ISP_3_CLOCKS	(2 << 12)
+#define   IDE_RCT_4_CLOCKS	(0 <<  8)
+#define   IDE_RCT_3_CLOCKS	(1 <<  8)
+#define   IDE_RCT_2_CLOCKS	(2 <<  8)
+#define   IDE_RCT_1_CLOCKS	(3 <<  8)
+#define   IDE_DTE1		(1 <<  7)
+#define   IDE_PPE1		(1 <<  6)
+#define   IDE_IE1		(1 <<  5)
+#define   IDE_TIME1		(1 <<  4)
+#define   IDE_DTE0		(1 <<  3)
+#define   IDE_PPE0		(1 <<  2)
+#define   IDE_IE0		(1 <<  1)
+#define   IDE_TIME0		(1 <<  0)
+#define IDE_TIM_SEC		0x42	/* IDE timings, secondary */
+
+#define IDE_SDMA_CNT		0x48	/* Synchronous DMA control */
+#define   IDE_SSDE1		(1 <<  3)
+#define   IDE_SSDE0		(1 <<  2)
+#define   IDE_PSDE1		(1 <<  1)
+#define   IDE_PSDE0		(1 <<  0)
+
+#define IDE_SDMA_TIM		0x4a
+
+#define IDE_CONFIG		0x54	/* IDE I/O Configuration Register */
+#define   SIG_MODE_SEC_NORMAL	(0 << 18)
+#define   SIG_MODE_SEC_TRISTATE	(1 << 18)
+#define   SIG_MODE_SEC_DRIVELOW	(2 << 18)
+#define   SIG_MODE_PRI_NORMAL	(0 << 16)
+#define   SIG_MODE_PRI_TRISTATE	(1 << 16)
+#define   SIG_MODE_PRI_DRIVELOW	(2 << 16)
+#define   FAST_SCB1		(1 << 15)
+#define   FAST_SCB0		(1 << 14)
+#define   FAST_PCB1		(1 << 13)
+#define   FAST_PCB0		(1 << 12)
+#define   SCB1			(1 <<  3)
+#define   SCB0			(1 <<  2)
+#define   PCB1			(1 <<  1)
+#define   PCB0			(1 <<  0)
+
+#define SATA_SIRI		0xa0 /* SATA Indexed Register Index */
+#define SATA_SIRD		0xa4 /* SATA Indexed Register Data */
+#define SATA_SP			0xd0 /* Scratchpad */
+
+/* SATA IOBP Registers */
+#define SATA_IOBP_SP0G3IR	0xea000151
+#define SATA_IOBP_SP1G3IR	0xea000051
+
 /* PCI Configuration Space (D31:F3): SMBus */
 #define PCH_SMBUS_DEV		PCI_BDF(0, 0x1f, 3)
 #define SMB_BASE		0x20

doc/device-tree-bindings/ata/intel-sata.txt

@@ -0,0 +1,26 @@
+Intel Pantherpoint SATA Device Binding
+======================================
+
+The device tree node which describes the operation of the Intel Pantherpoint
+SATA device is as follows:
+
+Required properties :
+- compatible = "intel,pantherpoint-ahci"
+- intel,sata-mode : string, one of:
+     "ahci" : Use AHCI mode (default)
+     "combined" : Use combined IDE + legacy mode
+     "plain-ide" : Use plain IDE mode
+- intel,sata-port-map : Which SATA ports are enabled, bit 0=enable first port,
+    bit 1=enable second port, etc.
+- intel,sata-port0-gen3-tx : Value for the IOBP_SP0G3IR register
+- intel,sata-port1-gen3-tx : Value for the IOBP_SP1G3IR register
+
+Example
+-------
+
+sata {
+	compatible = "intel,pantherpoint-ahci";
+	intel,sata-mode = "ahci";
+	intel,sata-port-map = <1>;
+	intel,sata-port0-gen3-tx = <0x00880a7f>;
+};

include/fdtdec.h

@@ -120,6 +120,7 @@ enum fdt_compat_id {
 	COMPAT_INTEL_LPC,		/* Intel Low Pin Count I/F */
 	COMPAT_INTEL_MICROCODE,		/* Intel microcode update */
 	COMPAT_MEMORY_SPD,		/* Memory SPD information */
+	COMPAT_INTEL_PANTHERPOINT_AHCI,	/* Intel Pantherpoint AHCI */
 
 	COMPAT_COUNT,
 };

lib/fdtdec.c

@@ -75,6 +75,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(COMPAT_INTEL_LPC, "intel,lpc"),
 	COMPAT(INTEL_MICROCODE, "intel,microcode"),
 	COMPAT(MEMORY_SPD, "memory-spd"),
+	COMPAT(INTEL_PANTHERPOINT_AHCI, "intel,pantherpoint-ahci"),
 };
 
 const char *fdtdec_get_compatible(enum fdt_compat_id id)