board: gdsys: Make gdsys osd hardware detection more robust

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

board/gdsys/405ep/iocon.c

@@ -15,7 +15,6 @@
 #include "405ep.h"
 #include <gdsys_fpga.h>
 
-#include "../common/dp501.h"
 #include "../common/osd.h"
 #include "../common/mclink.h"
 
@@ -99,8 +98,6 @@ enum {
 unsigned int mclink_fpgacount;
 struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
 
-int dp501_i2c[] = CONFIG_SYS_DP501_I2C;
-
 static int setup_88e1518(const char *bus, unsigned char addr);
 
 int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
@@ -374,20 +371,16 @@ int last_stage_init(void)
 	u16 fpga_features;
 	int feature_carrier_speed = fpga_features & (1<<4);
 	bool ch0_rgmii2_present = false;
-	int old_bus = i2c_get_bus_num();
 
 	FPGA_GET_REG(0, fpga_features, &fpga_features);
 
-	/* Turn on Parade DP501 */
-	pca9698_direction_output(0x20, 9, 1);
-	udelay(500000);
-
-	i2c_set_bus_num(dp501_i2c[0]);
-	dp501_powerup(0x08);
-	i2c_set_bus_num(old_bus);
+	if (!legacy) {
+		/* Turn on Parade DP501 */
+		pca9698_direction_output(0x20, 9, 1);
+		udelay(500000);
 
-	if (!legacy)
 		ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
+	}
 
 	print_fpga_info(0, ch0_rgmii2_present);
 	osd_probe(0);

board/gdsys/common/osd.c

@@ -9,6 +9,7 @@
 #include <i2c.h>
 #include <malloc.h>
 
+#include "dp501.h"
 #include <gdsys_fpga.h>
 
 #define CH7301_I2C_ADDR 0x75
@@ -24,6 +25,8 @@
 #define SIL1178_MASTER_I2C_ADDRESS 0x38
 #define SIL1178_SLAVE_I2C_ADDRESS 0x39
 
+#define DP501_I2C_ADDR 0x08
+
 #define PIXCLK_640_480_60 25180000
 
 enum {
@@ -54,18 +57,23 @@ u16 *buf;
 
 unsigned int max_osd_screen = CONFIG_SYS_OSD_SCREENS - 1;
 
-#ifdef CONFIG_SYS_CH7301
-int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C;
+#ifdef CONFIG_SYS_ICS8N3QV01_I2C
+int ics8n3qv01_i2c[] = CONFIG_SYS_ICS8N3QV01_I2C;
 #endif
 
-#ifdef CONFIG_SYS_ICS8N3QV01
-int ics8n3qv01_i2c[] = CONFIG_SYS_ICS8N3QV01_I2C;
+#ifdef CONFIG_SYS_CH7301_I2C
+int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C;
 #endif
 
-#ifdef CONFIG_SYS_SIL1178
+#ifdef CONFIG_SYS_SIL1178_I2C
 int sil1178_i2c[] = CONFIG_SYS_SIL1178_I2C;
 #endif
 
+#ifdef CONFIG_SYS_DP501_I2C
+int dp501_i2c[] = CONFIG_SYS_DP501_I2C;
+#endif
+
+
 #ifdef CONFIG_SYS_MPC92469AC
 static void mpc92469ac_calc_parameters(unsigned int fout,
 	unsigned int *post_div, unsigned int *feedback_div)
@@ -118,7 +126,7 @@ static void mpc92469ac_set(unsigned screen, unsigned int fout)
 }
 #endif
 
-#ifdef CONFIG_SYS_ICS8N3QV01
+#ifdef CONFIG_SYS_ICS8N3QV01_I2C
 
 static unsigned int ics8n3qv01_get_fout_calc(unsigned index)
 {
@@ -283,6 +291,8 @@ int osd_probe(unsigned screen)
 	u16 features;
 	u8 value;
 	int old_bus = i2c_get_bus_num();
+	bool pixclock_present = false;
+	bool output_driver_present = false;
 
 	FPGA_GET_REG(0, osd.version, &version);
 	FPGA_GET_REG(0, osd.features, &features);
@@ -297,51 +307,76 @@ int osd_probe(unsigned screen)
 	printf("OSD%d:  Digital-OSD version %01d.%02d, %d" "x%d characters\n",
 		screen, version/100, version%100, base_width, base_height);
 
-#ifdef CONFIG_SYS_CH7301
-	i2c_set_bus_num(ch7301_i2c[screen]);
-	value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID);
-	if (value != 0x17) {
-		printf("       Probing CH7301 failed, DID %02x\n", value);
-		i2c_set_bus_num(old_bus);
-		return -1;
-	}
-	i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08);
-	i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16);
-	i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60);
-	i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09);
-	i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0);
-#endif
+	/* setup pixclock */
 
 #ifdef CONFIG_SYS_MPC92469AC
+	pixclock_present = true;
 	mpc92469ac_set(screen, PIXCLK_640_480_60);
 #endif
 
-#ifdef CONFIG_SYS_ICS8N3QV01
+#ifdef CONFIG_SYS_ICS8N3QV01_I2C
 	i2c_set_bus_num(ics8n3qv01_i2c[screen]);
-	ics8n3qv01_set(PIXCLK_640_480_60);
+	if (!i2c_probe(ICS8N3QV01_I2C_ADDR)) {
+		ics8n3qv01_set(PIXCLK_640_480_60);
+		pixclock_present = true;
+	}
 #endif
 
-#ifdef CONFIG_SYS_SIL1178
+	if (!pixclock_present)
+		printf("       no pixelclock found\n");
+
+	/* setup output driver */
+
+#ifdef CONFIG_SYS_CH7301_I2C
+	i2c_set_bus_num(ch7301_i2c[screen]);
+	if (!i2c_probe(CH7301_I2C_ADDR)) {
+		value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID);
+		if (value == 0x17) {
+			i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08);
+			i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16);
+			i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60);
+			i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09);
+			i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0);
+			output_driver_present = true;
+		}
+	}
+#endif
+
+#ifdef CONFIG_SYS_SIL1178_I2C
 	i2c_set_bus_num(sil1178_i2c[screen]);
-	value = i2c_reg_read(SIL1178_SLAVE_I2C_ADDRESS, 0x02);
-	if (value != 0x06) {
-		printf("       Probing SIL1178, DEV_IDL %02x\n", value);
-		i2c_set_bus_num(old_bus);
-		return -1;
+	if (!i2c_probe(SIL1178_SLAVE_I2C_ADDRESS)) {
+		value = i2c_reg_read(SIL1178_SLAVE_I2C_ADDRESS, 0x02);
+		if (value == 0x06) {
+			/*
+			 * magic initialization sequence,
+			 * adapted from datasheet
+			 */
+			i2c_reg_write(SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36);
+			i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37);
+			output_driver_present = true;
+		}
+	}
+#endif
+
+#ifdef CONFIG_SYS_DP501_I2C
+	i2c_set_bus_num(dp501_i2c[screen]);
+	if (!i2c_probe(DP501_I2C_ADDR)) {
+		dp501_powerup(DP501_I2C_ADDR);
+		output_driver_present = true;
 	}
-	/* magic initialization sequence adapted from datasheet */
-	i2c_reg_write(SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36);
-	i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37);
 #endif
 
+	if (!output_driver_present)
+		printf("       no output driver found\n");
+
 	FPGA_SET_REG(screen, osd.control, 0x0049);
 
 	FPGA_SET_REG(screen, osd.xy_size, ((32 - 1) << 8) | (16 - 1));

drivers/i2c/ihs_i2c.c

@@ -34,7 +34,6 @@ static int wait_for_int(bool read)
 	       | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) {
 		udelay(10);
 		if (ctr++ > 5000) {
-			printf("I2C timeout\n");
 			return 1;
 		}
 		FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val);

include/configs/dlvision-10g.h

@@ -121,9 +121,7 @@
 		  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT	0xa10
 
-#define CONFIG_SYS_ICS8N3QV01
 #define CONFIG_SYS_ICS8N3QV01_I2C	{0, 1}
-#define CONFIG_SYS_SIL1178
 #define CONFIG_SYS_SIL1178_I2C		{0, 1}
 
 /* EBC peripherals */

include/configs/iocon.h

@@ -166,11 +166,6 @@ int fpga_gpio_get(unsigned int bus, int pin);
 	} while (0)
 #define I2C_DELAY	udelay(25)	/* 1/4 I2C clock duration */
 
-/*
- * OSD hardware
- */
-#define CONFIG_SYS_MPC92469AC
-
 /*
  * FLASH organization
  */
@@ -298,7 +293,6 @@ int fpga_gpio_get(unsigned int bus, int pin);
 /*
  * OSD Setup
  */
-#define CONFIG_SYS_ICS8N3QV01
 #define CONFIG_SYS_MPC92469AC
 #define CONFIG_SYS_OSD_SCREENS		1
 #define CONFIG_SYS_DP501_DIFFERENTIAL