arm: mx5: Add M53Menlo board

Add Menlosystems M53 board, based on the M53 SoM.
This board has Ethernet, USB host, USB gadget, UART and LCD on it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

arch/arm/mach-imx/mx5/Kconfig

@@ -30,6 +30,11 @@ config TARGET_KP_IMX53
 	select MX53
 	imply CMD_DM
 
+config TARGET_M53MENLO
+	bool "Support m53menlo"
+	select MX53
+	select SUPPORT_SPL
+
 config TARGET_MX51EVK
 	bool "Support mx51evk"
 	select BOARD_LATE_INIT
@@ -89,6 +94,7 @@ source "board/freescale/mx53smd/Kconfig"
 source "board/ge/mx53ppd/Kconfig"
 source "board/inversepath/usbarmory/Kconfig"
 source "board/k+p/kp_imx53/Kconfig"
+source "board/menlo/m53menlo/Kconfig"
 source "board/technologic/ts4800/Kconfig"
 
 endif

board/menlo/m53menlo/Kconfig

@@ -0,0 +1,15 @@
+if TARGET_M53MENLO
+
+config SYS_BOARD
+	default "m53menlo"
+
+config SYS_VENDOR
+	default "menlo"
+
+config SYS_SOC
+	default "mx5"
+
+config SYS_CONFIG_NAME
+	default "m53menlo"
+
+endif

board/menlo/m53menlo/MAINTAINERS

@@ -0,0 +1,7 @@
+M53MENLO BOARD
+M:	Marek Vasut <marex@denx.de>
+M:	Olaf Mandel <o.mandel@menlosystems.com>
+S:	Maintained
+F:	board/menlo/m53menlo/
+F:	include/configs/m53menlo.h
+F:	configs/m53menlo_defconfig

board/menlo/m53menlo/Makefile

@@ -0,0 +1,9 @@
+#
+# Menlosystems M53Menlo
+# Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
+# Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= m53menlo.o

board/menlo/m53menlo/imximage.cfg

@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * M53 DRAM init values
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/mach-imx/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION	2
+
+
+/* Boot Offset 0x400, valid for both SD and NAND boot. */
+BOOT_OFFSET	FLASH_OFFSET_STANDARD
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+DATA 4 0x53fa86f4 0x00000000	 /* GRP_DDRMODE_CTL */
+DATA 4 0x53fa8714 0x00000000	 /* GRP_DDRMODE */
+DATA 4 0x53fa86fc 0x00000000	 /* GRP_DDRPKE */
+DATA 4 0x53fa8724 0x04000000	 /* GRP_DDR_TYPE */
+
+DATA 4 0x53fa872c 0x00300000	 /* GRP_B3DS */
+DATA 4 0x53fa8554 0x00300000	 /* DRAM_DQM3 */
+DATA 4 0x53fa8558 0x00300040	 /* DRAM_SDQS3 */
+
+DATA 4 0x53fa8728 0x00300000	 /* GRP_B2DS */
+DATA 4 0x53fa8560 0x00300000	 /* DRAM_DQM2 */
+DATA 4 0x53fa8568 0x00300040	 /* DRAM_SDQS2 */
+
+DATA 4 0x53fa871c 0x00300000	 /* GRP_B1DS */
+DATA 4 0x53fa8594 0x00300000	 /* DRAM_DQM1 */
+DATA 4 0x53fa8590 0x00300040	 /* DRAM_SDQS1 */
+
+DATA 4 0x53fa8718 0x00300000	 /* GRP_B0DS */
+DATA 4 0x53fa8584 0x00300000	 /* DRAM_DQM0 */
+DATA 4 0x53fa857c 0x00300040	 /* DRAM_SDQS0 */
+
+DATA 4 0x53fa8578 0x00300000	 /* DRAM_SDCLK_0 */
+DATA 4 0x53fa8570 0x00300000	 /* DRAM_SDCLK_1 */
+
+DATA 4 0x53fa8574 0x00300000	 /* DRAM_CAS */
+DATA 4 0x53fa8588 0x00300000	 /* DRAM_RAS */
+DATA 4 0x53fa86f0 0x00300000	 /* GRP_ADDDS */
+DATA 4 0x53fa8720 0x00300000	 /* GRP_CTLDS */
+
+DATA 4 0x53fa8564 0x00300040	 /* DRAM_SDODT1 */
+DATA 4 0x53fa8580 0x00300040	 /* DRAM_SDODT0 */
+
+/* ESDCTL */
+DATA 4 0x63fd9088 0x32383535
+DATA 4 0x63fd9090 0x40383538
+DATA 4 0x63fd907c 0x0136014d
+DATA 4 0x63fd9080 0x01510141
+
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd900c 0x555952e3
+DATA 4 0x63fd9010 0xb68e8b63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000

board/menlo/m53menlo/m53menlo.c

@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Menlosystems M53Menlo board
+ *
+ * Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/mach-imx/mx5_video.h>
+#include <asm/mach-imx/video.h>
+#include <asm/gpio.h>
+#include <asm/spl.h>
+#include <fdt_support.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <ipu_pixfmt.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <spl.h>
+#include <splash.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 mx53_dram_size[2];
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	/*
+	 * WARNING: We must override get_effective_memsize() function here
+	 * to report only the size of the first DRAM bank. This is to make
+	 * U-Boot relocator place U-Boot into valid memory, that is, at the
+	 * end of the first DRAM bank. If we did not override this function
+	 * like so, U-Boot would be placed at the address of the first DRAM
+	 * bank + total DRAM size - sizeof(uboot), which in the setup where
+	 * each DRAM bank contains 512MiB of DRAM would result in placing
+	 * U-Boot into invalid memory area close to the end of the first
+	 * DRAM bank.
+	 */
+	return PHYS_SDRAM_2 + mx53_dram_size[1];
+}
+
+int dram_init(void)
+{
+	mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+	mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+	gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = mx53_dram_size[1];
+
+	return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+	static const iomux_v3_cfg_t uart_pads[] = {
+		MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+		MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+	if (port == 0) {
+		/* USB OTG PWRON */
+		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
+						    PAD_CTL_PKE |
+						    PAD_CTL_DSE_HIGH));
+		gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
+
+		/* USB OTG Over Current */
+		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
+	} else if (port == 1) {
+		/* USB Host PWRON */
+		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
+						    PAD_CTL_PKE |
+						    PAD_CTL_DSE_HIGH));
+		gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
+
+		/* USB Host Over Current */
+		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
+	}
+
+	return 0;
+}
+#endif
+
+static void setup_iomux_fec(void)
+{
+	static const iomux_v3_cfg_t fec_pads[] = {
+		/* MDIO pads */
+		NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+
+		/* FEC 0 pads */
+		NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+
+		/* FEC 1 pads */
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
+			     PAD_CTL_HYS | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = {
+	MMC_SDHC1_BASE_ADDR,
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
+	gpio_direction_input(IMX_GPIO_NR(1, 1));
+
+	return !gpio_get_value(IMX_GPIO_NR(1, 1));
+}
+
+#define SD_CMD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+				 PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+				 PAD_CTL_DSE_HIGH)
+
+int board_mmc_init(bd_t *bis)
+{
+	static const iomux_v3_cfg_t sd1_pads[] = {
+		NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+	};
+
+	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+	imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
+
+	return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+#ifdef CONFIG_VIDEO
+static void enable_lvds_clock(struct display_info_t const *dev, const u8 hclk)
+{
+	static struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+	int ret;
+
+	/* For ETM0430G0DH6 model, this must be enabled before the clock. */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 1);
+
+	/*
+	 * Set LVDS clock to 33.28 MHz for the display. The PLL4 is set to
+	 * 233 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 .
+	 */
+	ret = mxc_set_clock(MXC_HCLK, hclk, MXC_LDB_CLK);
+	if (ret)
+		puts("IPU:   Failed to configure LDB clock\n");
+
+	/* Configure CCM_CSCMR2 */
+	clrsetbits_le32(&mxc_ccm->cscmr2,
+			(0x7 << 26) | BIT(10) | BIT(8),
+			(0x5 << 26) | BIT(10) | BIT(8));
+
+	/* Configure LDB_CTRL */
+	writel(0x201, 0x53fa8008);
+}
+
+static void enable_lvds_etm0430g0dh6(struct display_info_t const *dev)
+{
+	/* For ETM0430G0DH6 model, this must be enabled before the clock. */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 1);
+
+	/*
+	 * Set LVDS clock to 9 MHz for the display. The PLL4 is set to
+	 * 63 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 .
+	 */
+	enable_lvds_clock(dev, 63);
+}
+
+static void enable_lvds_etm0700g0dh6(struct display_info_t const *dev)
+{
+	/*
+	 * Set LVDS clock to 33.28 MHz for the display. The PLL4 is set to
+	 * 233 MHz, divided by 7 by setting CCM_CSCMR2 LDB_DI0_IPU_DIV=1 .
+	 */
+	enable_lvds_clock(dev, 233);
+
+	/* For ETM0700G0DH6 model, this may be enabled after the clock. */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 1);
+}
+
+static const char *lvds_compat_string;
+
+static int detect_lvds(struct display_info_t const *dev)
+{
+	u8 touchid[23];
+	u8 *touchptr = &touchid[0];
+	int ret;
+
+	ret = i2c_set_bus_num(0);
+	if (ret)
+		return 0;
+
+	/* Touchscreen is at address 0x38, ID register is 0xbb. */
+	ret = i2c_read(0x38, 0xbb, 1, touchid, sizeof(touchid));
+	if (ret)
+		return 0;
+
+	/* EP0430 prefixes the response with 0xbb, skip it. */
+	if (*touchptr == 0xbb)
+		touchptr++;
+
+	/* Skip the 'EP' prefix. */
+	touchptr += 2;
+
+	ret = !memcmp(touchptr, &dev->mode.name[7], 4);
+	if (ret)
+		lvds_compat_string = dev->mode.name;
+
+	return ret;
+}
+
+void board_preboot_os(void)
+{
+	/* Power off the LCD to prevent awful color flicker */
+	gpio_direction_output(IMX_GPIO_NR(6, 0), 0);
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	if (lvds_compat_string)
+		do_fixup_by_path_string(blob, "/panel", "compatible",
+					lvds_compat_string);
+
+	return 0;
+}
+
+struct display_info_t const displays[] = {
+	{
+		.bus	= 0,
+		.addr	= 0,
+		.detect	= detect_lvds,
+		.enable	= enable_lvds_etm0430g0dh6,
+		.pixfmt	= IPU_PIX_FMT_RGB666,
+		.mode	= {
+			.name		= "edt,etm0430g0dh6",
+			.refresh	= 60,
+			.xres		= 480,
+			.yres		= 272,
+			.pixclock	= 111111, /* picosecond (9 MHz) */
+			.left_margin	= 2,
+			.right_margin	= 2,
+			.upper_margin	= 2,
+			.lower_margin	= 2,
+			.hsync_len	= 41,
+			.vsync_len	= 10,
+			.sync		= 0x40000000,
+			.vmode          = FB_VMODE_NONINTERLACED
+		}
+	}, {
+		.bus	= 0,
+		.addr	= 0,
+		.detect	= detect_lvds,
+		.enable	= enable_lvds_etm0700g0dh6,
+		.pixfmt	= IPU_PIX_FMT_RGB666,
+		.mode	= {
+			.name		= "edt,etm0700g0dh6",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30048, /* picosecond (33.28 MHz) */
+			.left_margin	= 40,
+			.right_margin	= 88,
+			.upper_margin	= 10,
+			.lower_margin	= 33,
+			.hsync_len	= 128,
+			.vsync_len	= 2,
+			.sync		= FB_SYNC_EXT,
+			.vmode          = FB_VMODE_NONINTERLACED
+		}
+	}
+};
+
+size_t display_count = ARRAY_SIZE(displays);
+#endif
+
+#ifdef CONFIG_SPLASH_SCREEN
+static struct splash_location default_splash_locations[] = {
+	{
+		.name		= "mmc_fs",
+		.storage	= SPLASH_STORAGE_MMC,
+		.flags		= SPLASH_STORAGE_FS,
+		.devpart	= "0:1",
+	},
+};
+
+int splash_screen_prepare(void)
+{
+	return splash_source_load(default_splash_locations,
+				  ARRAY_SIZE(default_splash_locations));
+}
+#endif
+
+#define I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+static void setup_iomux_i2c(void)
+{
+	static const iomux_v3_cfg_t i2c_pads[] = {
+		/* I2C1 */
+		NEW_PAD_CTRL(MX53_PAD_EIM_D28__I2C1_SDA, I2C_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_EIM_D21__I2C1_SCL, I2C_PAD_CTRL),
+		/* I2C2 */
+		NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
+		NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
+}
+
+static void setup_iomux_video(void)
+{
+	static const iomux_v3_cfg_t lcd_pads[] = {
+		MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
+		MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
+		MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
+		MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
+		MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+}
+
+static void setup_iomux_nand(void)
+{
+	static const iomux_v3_cfg_t nand_pads[] = {
+		NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+			     PAD_CTL_PUS_100K_UP),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+			     PAD_CTL_PUS_100K_UP),
+		NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+			     PAD_CTL_DSE_HIGH),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+		NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+			     PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+}
+
+static void m53_set_clock(void)
+{
+	int ret;
+	const u32 ref_clk = MXC_HCLK;
+	const u32 dramclk = 400;
+	u32 cpuclk;
+
+	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
+					    PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
+	gpio_direction_input(IMX_GPIO_NR(4, 0));
+
+	/* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
+	cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
+
+	ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
+	if (ret)
+		printf("CPU:   Switch CPU clock to %dMHz failed\n", cpuclk);
+
+	ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
+	if (ret) {
+		printf("CPU:   Switch peripheral clock to %dMHz failed\n",
+		       dramclk);
+	}
+
+	ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
+	if (ret)
+		printf("CPU:   Switch DDR clock to %dMHz failed\n", dramclk);
+}
+
+static void m53_set_nand(void)
+{
+	u32 i;
+
+	/* NAND flash is muxed on ATA pins */
+	setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
+
+	/* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
+	for (i = 0x4; i < 0x94; i += 0x18) {
+		clrbits_le32(WEIM_BASE_ADDR + i,
+			     WEIM_GCR2_MUX16_BYP_GRANT_MASK);
+	}
+
+	mxc_set_clock(0, 33, MXC_NFC_CLK);
+	enable_nfc_clk(1);
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+	setup_iomux_fec();
+	setup_iomux_i2c();
+	setup_iomux_nand();
+	setup_iomux_video();
+
+	m53_set_clock();
+
+	mxc_set_sata_internal_clock();
+
+	/* NAND clock @ 33MHz */
+	m53_set_nand();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: Menlosystems M53Menlo\n");
+
+	return 0;
+}
+
+/*
+ * NAND SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+	setup_iomux_nand();
+	m53_set_clock();
+	m53_set_nand();
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NAND;
+}
+#endif

configs/m53menlo_defconfig

@@ -0,0 +1,60 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX5=y
+CONFIG_SYS_TEXT_BASE=0x71000000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_M53MENLO=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+# CONFIG_CMD_BMODE is not set
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/menlo/m53menlo/imximage.cfg"
+CONFIG_BOOTDELAY=1
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttymxc0,115200"
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GREPENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_DATE=y
+CONFIG_CMD_BTRFS=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(u-boot),512k(env1),512k(env2),-(ubi)"
+CONFIG_CMD_UBI=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_FSL_ESDHC=y
+CONFIG_NAND=y
+CONFIG_NAND_MXC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_FAT_WRITE=y
+CONFIG_OF_LIBFDT=y

include/configs/m53menlo.h

@@ -0,0 +1,246 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/*
+ * Menlosystems M53Menlo configuration
+ * Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
+ */
+
+#ifndef __M53MENLO_CONFIG_H__
+#define __M53MENLO_CONFIG_H__
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_FSL_CLK
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
+/*
+ * Memory configurations
+ */
+#define PHYS_SDRAM_1			CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE		(gd->bd->bi_dram[0].size)
+#define PHYS_SDRAM_2			CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE		(gd->bd->bi_dram[1].size)
+#define PHYS_SDRAM_SIZE			(gd->ram_size)
+#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
+#define CONFIG_SYS_MEMTEST_START	0x70000000
+#define CONFIG_SYS_MEMTEST_END		0x8ff00000
+
+#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
+#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/*
+ * U-Boot general configurations
+ */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+						/* Boot argument buffer size */
+
+/*
+ * Serial Driver
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/*
+ * MMC Driver
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+#endif
+
+/*
+ * NAND
+ */
+#define CONFIG_ENV_SIZE			(16 * 1024)
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR_AXI
+#define CONFIG_MXC_NAND_REGS_BASE	NFC_BASE_ADDR_AXI
+#define CONFIG_MXC_NAND_IP_REGS_BASE	NFC_BASE_ADDR
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+
+/* Environment is in NAND */
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_RANGE		(4 * CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OFFSET		(8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
+#define CONFIG_ENV_OFFSET_REDUND	\
+		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+#endif
+
+/*
+ * Ethernet on SOC (FEC)
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE			FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR		0x0
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+#define CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_ETHPRIME			"FEC0"
+#endif
+
+/*
+ * I2C
+ */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_RTC_BUS_NUM		1 /* I2C2 */
+#endif
+
+/*
+ * RTC
+ */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	2000
+#endif
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_MXC_USB_PORT		1
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#endif
+
+/*
+ * SATA
+ */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_DWC_AHSATA_PORT_ID	0
+#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_BASE_ADDR
+#define CONFIG_LBA48
+#endif
+
+/*
+ * LCD
+ */
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASHIMAGE_GUARD
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
+#endif
+
+/* LVDS display */
+#define CONFIG_SYS_LDB_CLOCK			33260000
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_SPLASH_SOURCE
+
+/* IIM Fuses */
+#define CONFIG_FSL_IIM
+
+/*
+ * Boot Linux
+ */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTFILE		"boot/fitImage"
+#define CONFIG_LOADADDR		0x70800000
+#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+
+/*
+ * NAND SPL
+ */
+#define CONFIG_SPL_TARGET		"u-boot-with-nand-spl.imx"
+#define CONFIG_SPL_TEXT_BASE		0x70008000
+#define CONFIG_SPL_PAD_TO		0x8000
+#define CONFIG_SPL_STACK		0x70004000
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+
+/*
+ * Extra Environments
+ */
+#define CONFIG_PREBOOT		"run try_bootscript"
+#define CONFIG_HOSTNAME		"m53menlo"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"consdev=ttymxc0\0"						\
+	"baudrate=115200\0"						\
+	"bootscript=boot.scr\0"						\
+	"mmcdev=0\0"							\
+	"mmcpart=1\0"							\
+	"rootpath=/srv/\0"						\
+	"kernel_addr_r=0x72000000\0"					\
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"			\
+	"netdev=eth0\0"							\
+	"splashsource=mmc_fs\0"						\
+	"splashfile=usplash.bmp.gz\0"					\
+	"splashimage=0x88000000\0"					\
+	"splashpos=m,m\0"						\
+	"addcons="							\
+		"setenv bootargs ${bootargs} "				\
+		"console=${consdev},${baudrate}\0"			\
+	"addip="							\
+		"setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off\0"				\
+	"addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0"	\
+	"addmisc="							\
+		"setenv bootargs ${bootargs} ${miscargs}\0"		\
+	"addargs=run addcons addmisc addmtd\0"				\
+	"mmcload="							\
+		"mmc rescan ; load mmc ${mmcdev}:${mmcpart} "		\
+		"${kernel_addr_r} ${bootfile}\0"			\
+	"miscargs=nohlt panic=1\0"					\
+	"mmcargs=setenv bootargs root=/dev/mmcblk0p${mmcpart} rw "	\
+		"rootwait\0"						\
+	"mmc_mmc="							\
+		"run mmcload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"netload=tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
+	"net_nfs="							\
+		"run netload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"nfsargs="							\
+		"setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}${hostname},v3,tcp\0"	\
+	"try_bootscript="						\
+		"mmc rescan;"						\
+		"if test -e mmc 0:1 ${bootscript} ; then "		\
+		"if load mmc 0:1 ${kernel_addr_r} ${bootscript};"	\
+		"then ; "						\
+			"echo Running bootscript... ; "			\
+			"source ${kernel_addr_r} ; "			\
+		"fi ; "							\
+		"fi\0"
+
+#endif	/* __M53MENLO_CONFIG_H__ */