Fix spelling of "resetting".

Cover-Letter: Fixes several spelling errors for the words "resetting",
  "extended", "occur", and "multiple".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

arch/arm/mach-exynos/dmc_init_ddr3.c

@@ -618,7 +618,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 		/*
 		 * Send NOP, MRS and ZQINIT commands
 		 * Sending MRS command will reset the DRAM. We should not be
-		 * reseting the DRAM after resume, this will lead to memory
+		 * resetting the DRAM after resume, this will lead to memory
 		 * corruption as DRAM content is lost after DRAM reset
 		 */
 		dmc_config_mrs(mem, &drex0->directcmd);

arch/arm/mach-socfpga/misc.c

@@ -362,7 +362,7 @@ int arch_early_init_r(void)
 	 * issuing warm reset. The ancient kernel code expects this
 	 * value to be written into the register by the bootloader, so
 	 * to support that old code, we write it here instead of in the
-	 * reset_cpu() function just before reseting the CPU.
+	 * reset_cpu() function just before resetting the CPU.
 	 */
 	writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
 

arch/mips/mach-au1x00/au1x00_usb_ohci.c

@@ -671,7 +671,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 	__u32 info = 0;
 	unsigned int toggle = 0;
 
-	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+	/* OHCI handles the DATA-toggles itself, we just use the
+	   USB-toggle bits for resetting */
 	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 		toggle = TD_T_TOGGLE;
 	} else {

arch/powerpc/cpu/mpc5xxx/usb_ohci.c

@@ -670,7 +670,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 	__u32 info = 0;
 	unsigned int toggle = 0;
 
-	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+	/* OHCI handles the DATA-toggles itself, we just use the
+	   USB-toggle bits for resetting */
 	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 		toggle = TD_T_TOGGLE;
 	} else {

arch/powerpc/cpu/ppc4xx/usb_ohci.c

@@ -673,7 +673,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 	__u32 info = 0;
 	unsigned int toggle = 0;
 
-	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+	/* OHCI handles the DATA-toggles itself, we just use the
+	   USB-toggle bits for resetting */
 	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 		toggle = TD_T_TOGGLE;
 	} else {

drivers/net/fec_mxc.c

@@ -1024,7 +1024,7 @@ static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
 	start = get_timer(0);
 	while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET) {
 		if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
-			printf("FEC MXC: Timeout reseting chip\n");
+			printf("FEC MXC: Timeout resetting chip\n");
 			goto err4;
 		}
 		udelay(10);

drivers/usb/host/ohci-hcd.c

@@ -964,7 +964,7 @@ static void td_submit_job(ohci_t *ohci, struct usb_device *dev,
 	flush_dcache_buffer(buffer, data_len);
 
 	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle
-	 * bits for reseting */
+	 * bits for resetting */
 	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 		toggle = TD_T_TOGGLE;
 	} else {

drivers/usb/host/ohci-s3c24xx.c

@@ -677,7 +677,7 @@ static void td_submit_job(struct usb_device *dev, unsigned long pipe,
 	unsigned int toggle = 0;
 
 	/* OHCI handles the DATA-toggles itself, we just
-	   use the USB-toggle bits for reseting */
+	   use the USB-toggle bits for resetting */
 	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 		toggle = TD_T_TOGGLE;
 	} else {

include/vsprintf.h

@@ -72,7 +72,7 @@ long trailing_strtoln(const char *str, const char *end);
  * panic() - Print a message and reset/hang
  *
  * Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
- * defined, then it will hang instead of reseting.
+ * defined, then it will hang instead of resetting.
  *
  * @param fmt:	printf() format string for message, which should not include
  *		\n, followed by arguments
@@ -84,7 +84,7 @@ void panic(const char *fmt, ...)
  * panic_str() - Print a message and reset/hang
  *
  * Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
- * defined, then it will hang instead of reseting.
+ * defined, then it will hang instead of resetting.
  *
  * This function can be used instead of panic() when your board does not
  * already use printf(), * to keep code size small.