fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

Even u-boot boots up, the pcie link may not setup correctly when
Freescale SOC acts as endpoint.
So change the link status from 'no link' to 'undetermined' to
reduce the confusion.
The link status can check from host side eventually.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

drivers/pci/fsl_pci_init.c

@@ -504,8 +504,14 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
 		}
 #endif
 		if (!enabled) {
-			/* Let the user know there's no PCIe link */
-			printf("no link, regs @ 0x%lx\n", pci_info->regs);
+			/* Let the user know there's no PCIe link for root
+			 * complex. for endpoint, the link may not setup, so
+			 * print undetermined.
+			 */
+			if (fsl_is_pci_agent(hose))
+				printf("undetermined, regs @ 0x%lx\n", pci_info->regs);
+			else
+				printf("no link, regs @ 0x%lx\n", pci_info->regs);
 			hose->last_busno = hose->first_busno;
 			return;
 		}