imx6: drop duplicated bss memset and board_init_r() call

bss section is cleared in crt0.S. board_init_r() is also
entered from crt0 code.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

board/bachmann/ot1200/ot1200_spl.c

@@ -151,10 +151,4 @@ void board_init_f(ulong dummy)
 
 	/* configure MMDC for SDRAM width/size and per-model calibration */
 	ot1200_spl_dram_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* load/boot image from boot device */
-	board_init_r(NULL, 0);
 }

board/compulab/cm_fx6/spl.c

@@ -336,9 +336,6 @@ void board_init_f(ulong dummy)
 		puts("!!!ERROR!!! DRAM detection failed!!!\n");
 		hang();
 	}
-
-	memset(__bss_start, 0, __bss_end - __bss_start);
-	board_init_r(NULL, 0);
 }
 
 void board_boot_order(u32 *spl_boot_list)

board/engicam/common/spl.c

@@ -384,10 +384,4 @@ void board_init_f(ulong dummy)
 
 	/* DDR initialization */
 	spl_dram_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* load/boot image from boot device */
-	board_init_r(NULL, 0);
 }

board/gateworks/gw_ventana/gw_ventana_spl.c

@@ -626,9 +626,6 @@ void board_init_f(ulong dummy)
 	spl_dram_init(8 << ventana_info.sdram_width,
 		      16 << ventana_info.sdram_size,
 		      board_model);
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
 }
 
 void board_boot_order(u32 *spl_boot_list)

board/kosagi/novena/novena_spl.c

@@ -596,10 +596,4 @@ void board_init_f(ulong dummy)
 	udelay(100);
 	mmdc_do_write_level_calibration(&novena_ddr_info);
 	mmdc_do_dqs_calibration(&novena_ddr_info);
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* load/boot image from boot device */
-	board_init_r(NULL, 0);
 }

board/liebherr/mccmon6/spl.c

@@ -296,11 +296,5 @@ void board_init_f(ulong dummy)
 
 	/* DDR initialization */
 	spl_dram_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* load/boot image from boot device */
-	board_init_r(NULL, 0);
 }
 #endif

board/udoo/udoo_spl.c

@@ -252,11 +252,5 @@ void board_init_f(ulong dummy)
 
 	/* DDR initialization */
 	spl_dram_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* load/boot image from boot device */
-	board_init_r(NULL, 0);
 }
 #endif

board/wandboard/spl.c

@@ -300,11 +300,5 @@ void board_init_f(ulong dummy)
 
 	/* DDR initialization */
 	spl_dram_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* load/boot image from boot device */
-	board_init_r(NULL, 0);
 }
 #endif