exynos: Drop old smdk5250.c file

This is not used by any boards now. Drop it to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

board/samsung/smdk5250/Makefile

@@ -7,9 +7,5 @@
 obj-y	+= smdk5250_spl.o
 
 ifndef CONFIG_SPL_BUILD
-ifdef CONFIG_OF_CONTROL
 obj-y	+= exynos5-dt.o
-else
-obj-y	+= smdk5250.o
-endif
 endif

board/samsung/smdk5250/exynos5-dt.c

@@ -41,6 +41,131 @@ int exynos_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_POWER)
+#ifdef CONFIG_POWER_MAX77686
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+	u32 val;
+	int ret = 0;
+
+	ret = pmic_reg_read(p, reg, &val);
+	if (ret) {
+		debug("%s: PMIC %d register read failed\n", __func__, reg);
+		return -1;
+	}
+	val |= regval;
+	ret = pmic_reg_write(p, reg, val);
+	if (ret) {
+		debug("%s: PMIC %d register write failed\n", __func__, reg);
+		return -1;
+	}
+	return 0;
+}
+
+static int max77686_init(void)
+{
+	struct pmic *p;
+
+	if (pmic_init(I2C_PMIC))
+		return -1;
+
+	p = pmic_get("MAX77686_PMIC");
+	if (!p)
+		return -ENODEV;
+
+	if (pmic_probe(p))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+			    MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+		return -1;
+
+	/* VDD_MIF */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+			   MAX77686_BUCK1OUT_1V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK1OUT);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+			    MAX77686_BUCK1CTRL_EN))
+		return -1;
+
+	/* VDD_ARM */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+			   MAX77686_BUCK2DVS1_1_3V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK2DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+			    MAX77686_BUCK2CTRL_ON))
+		return -1;
+
+	/* VDD_INT */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+			   MAX77686_BUCK3DVS1_1_0125V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK3DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_G3D */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+			   MAX77686_BUCK4DVS1_1_2V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK4DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_LDO2 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+			    MAX77686_LD02CTRL1_1_5V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO3 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+			    MAX77686_LD03CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO5 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+			    MAX77686_LD05CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO10 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+			    MAX77686_LD10CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	return 0;
+}
+#endif	/* CONFIG_POWER_MAX77686 */
+
+int exynos_power_init(void)
+{
+	int ret = 0;
+
+#ifdef CONFIG_POWER_MAX77686
+	ret = max77686_init();
+#endif
+	return ret;
+}
+#endif	/* CONFIG_POWER */
+
 #ifdef CONFIG_LCD
 void exynos_cfg_lcd_gpio(void)
 {

board/samsung/smdk5250/smdk5250.c

@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <cros_ec.h>
-#include <fdtdec.h>
-#include <asm/io.h>
-#include <errno.h>
-#include <i2c.h>
-#include <lcd.h>
-#include <netdev.h>
-#include <spi.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/dwmmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/power.h>
-#include <asm/arch/sromc.h>
-#include <asm/arch/dp_info.h>
-#include <power/pmic.h>
-#include <power/max77686_pmic.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SOUND_MAX98095
-static void  board_enable_audio_codec(void)
-{
-	/* Enable MAX98095 Codec */
-	gpio_direction_output(EXYNOS5_GPIO_X17, 1);
-	gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
-}
-#endif
-
-int exynos_init(void)
-{
-#ifdef CONFIG_SOUND_MAX98095
-	board_enable_audio_codec();
-#endif
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_SMC911X
-	u32 smc_bw_conf, smc_bc_conf;
-	struct fdt_sromc config;
-	fdt_addr_t base_addr;
-
-	/* Non-FDT configuration - bank number and timing parameters*/
-	config.bank = CONFIG_ENV_SROM_BANK;
-	config.width = 2;
-
-	config.timing[FDT_SROM_TACS] = 0x01;
-	config.timing[FDT_SROM_TCOS] = 0x01;
-	config.timing[FDT_SROM_TACC] = 0x06;
-	config.timing[FDT_SROM_TCOH] = 0x01;
-	config.timing[FDT_SROM_TAH] = 0x0C;
-	config.timing[FDT_SROM_TACP] = 0x09;
-	config.timing[FDT_SROM_PMC] = 0x01;
-	base_addr = CONFIG_SMC911X_BASE;
-
-	/* Ethernet needs data bus width of 16 bits */
-	if (config.width != 2) {
-		debug("%s: Unsupported bus width %d\n", __func__,
-			config.width);
-		return -1;
-	}
-	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
-			| SROMC_BYTE_ENABLE(config.bank);
-
-	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS])   |\
-			SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\
-			SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\
-			SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\
-			SROMC_BC_TAH(config.timing[FDT_SROM_TAH])   |\
-			SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\
-			SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
-
-	/* Select and configure the SROMC bank */
-	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
-	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
-	return smc911x_initialize(0, base_addr);
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
-	printf("\nBoard: SMDK5250\n");
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	int err, ret = 0, index, bus_width;
-	u32 base;
-
-	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
-	if (err)
-		debug("SDMMC0 not configured\n");
-	ret |= err;
-
-	/*EMMC: dwmmc Channel-0 with 8 bit bus width */
-	index = 0;
-	base =  samsung_get_base_mmc() + (0x10000 * index);
-	bus_width = 8;
-	err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
-	if (err)
-		debug("dwmmc Channel-0 init failed\n");
-	ret |= err;
-
-	err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
-	if (err)
-		debug("SDMMC2 not configured\n");
-	ret |= err;
-
-	/*SD: dwmmc Channel-2 with 4 bit bus width */
-	index = 2;
-	base = samsung_get_base_mmc() + (0x10000 * index);
-	bus_width = 4;
-	err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
-	if (err)
-		debug("dwmmc Channel-2 init failed\n");
-	ret |= err;
-
-	return ret;
-}
-#endif
-
-void board_i2c_init(const void *blob)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
-		exynos_pinmux_config((PERIPH_ID_I2C0 + i),
-				     PINMUX_FLAG_NONE);
-	}
-}
-
-#if defined(CONFIG_POWER)
-#ifdef CONFIG_POWER_MAX77686
-static int pmic_reg_update(struct pmic *p, int reg, uint regval)
-{
-	u32 val;
-	int ret = 0;
-
-	ret = pmic_reg_read(p, reg, &val);
-	if (ret) {
-		debug("%s: PMIC %d register read failed\n", __func__, reg);
-		return -1;
-	}
-	val |= regval;
-	ret = pmic_reg_write(p, reg, val);
-	if (ret) {
-		debug("%s: PMIC %d register write failed\n", __func__, reg);
-		return -1;
-	}
-	return 0;
-}
-
-static int max77686_init(void)
-{
-	struct pmic *p;
-
-	if (pmic_init(I2C_PMIC))
-		return -1;
-
-	p = pmic_get("MAX77686_PMIC");
-	if (!p)
-		return -ENODEV;
-
-	if (pmic_probe(p))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
-		return -1;
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
-			    MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
-		return -1;
-
-	/* VDD_MIF */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
-			   MAX77686_BUCK1OUT_1V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK1OUT);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
-			    MAX77686_BUCK1CTRL_EN))
-		return -1;
-
-	/* VDD_ARM */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
-			   MAX77686_BUCK2DVS1_1_3V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK2DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
-			    MAX77686_BUCK2CTRL_ON))
-		return -1;
-
-	/* VDD_INT */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
-			   MAX77686_BUCK3DVS1_1_0125V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK3DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
-			    MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_G3D */
-	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
-			   MAX77686_BUCK4DVS1_1_2V)) {
-		debug("%s: PMIC %d register write failed\n", __func__,
-		      MAX77686_REG_PMIC_BUCK4DVS1);
-		return -1;
-	}
-
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
-			    MAX77686_BUCK3CTRL_ON))
-		return -1;
-
-	/* VDD_LDO2 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
-			    MAX77686_LD02CTRL1_1_5V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO3 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
-			    MAX77686_LD03CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO5 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
-			    MAX77686_LD05CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	/* VDD_LDO10 */
-	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
-			    MAX77686_LD10CTRL1_1_8V | EN_LDO))
-		return -1;
-
-	return 0;
-}
-#endif	/* CONFIG_POWER_MAX77686 */
-
-int exynos_power_init(void)
-{
-	int ret = 0;
-
-#ifdef CONFIG_POWER_MAX77686
-	ret = max77686_init();
-#endif
-	return ret;
-}
-#endif	/* CONFIG_POWER */
-
-#ifdef CONFIG_LCD
-void exynos_cfg_lcd_gpio(void)
-{
-
-	/* For Backlight */
-	gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
-	gpio_set_value(EXYNOS5_GPIO_B20, 1);
-
-	/* LCD power on */
-	gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
-	gpio_set_value(EXYNOS5_GPIO_X15, 1);
-
-	/* Set Hotplug detect for DP */
-	gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
-}
-
-void exynos_set_dp_phy(unsigned int onoff)
-{
-	set_dp_phy_ctrl(onoff);
-}
-
-vidinfo_t panel_info = {
-	.vl_freq	= 60,
-	.vl_col		= 2560,
-	.vl_row		= 1600,
-	.vl_width	= 2560,
-	.vl_height	= 1600,
-	.vl_clkp	= CONFIG_SYS_LOW,
-	.vl_hsp		= CONFIG_SYS_LOW,
-	.vl_vsp		= CONFIG_SYS_LOW,
-	.vl_dp		= CONFIG_SYS_LOW,
-	.vl_bpix	= 4,	/* LCD_BPP = 2^4, for output conosle on LCD */
-
-	/* wDP panel timing infomation */
-	.vl_hspw	= 32,
-	.vl_hbpd	= 80,
-	.vl_hfpd	= 48,
-
-	.vl_vspw	= 6,
-	.vl_vbpd	= 37,
-	.vl_vfpd	= 3,
-	.vl_cmd_allow_len = 0xf,
-
-	.win_id		= 3,
-	.dual_lcd_enabled = 0,
-
-	.init_delay	= 0,
-	.power_on_delay = 0,
-	.reset_delay	= 0,
-	.interface_mode = FIMD_RGB_INTERFACE,
-	.dp_enabled	= 1,
-};
-
-static struct edp_device_info edp_info = {
-	.disp_info = {
-		.h_res = 2560,
-		.h_sync_width = 32,
-		.h_back_porch = 80,
-		.h_front_porch = 48,
-		.v_res = 1600,
-		.v_sync_width  = 6,
-		.v_back_porch = 37,
-		.v_front_porch = 3,
-		.v_sync_rate = 60,
-	},
-	.lt_info = {
-		.lt_status = DP_LT_NONE,
-	},
-	.video_info = {
-		.master_mode = 0,
-		.bist_mode = DP_DISABLE,
-		.bist_pattern = NO_PATTERN,
-		.h_sync_polarity = 0,
-		.v_sync_polarity = 0,
-		.interlaced = 0,
-		.color_space = COLOR_RGB,
-		.dynamic_range = VESA,
-		.ycbcr_coeff = COLOR_YCBCR601,
-		.color_depth = COLOR_8,
-	},
-};
-
-static struct exynos_dp_platform_data dp_platform_data = {
-	.edp_dev_info	= &edp_info,
-};
-
-void init_panel_info(vidinfo_t *vid)
-{
-	vid->rgb_mode   = MODE_RGB_P;
-	exynos_set_dp_platform_data(&dp_platform_data);
-}
-#endif