kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX

The last users of CONFIG_KGDB_SER_INDEX were removed more than 3 years
ago in commits 550650ddd0 and bf16500f79, either kgdb subsystem should
care about this parameter or it should be gone completely.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

include/configs/B4860QDS.h

@@ -737,7 +737,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/BSC9131RDB.h

@@ -382,7 +382,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define CONFIG_USB_EHCI

include/configs/BSC9132QDS.h

@@ -625,7 +625,6 @@ combinations. this should be removed later
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/DU440.h

@@ -406,7 +406,6 @@ int du440_phy_addr(int devnum);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define CONFIG_SOURCE		1

include/configs/EXBITGEN.h

@@ -186,6 +186,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */

include/configs/JSE.h

@@ -274,6 +274,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */

include/configs/KAREF.h

@@ -273,7 +273,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
-#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif
 
 /*-----------------------------------------------------------------------

include/configs/METROBOX.h

@@ -338,7 +338,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
-#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif
 
 /*-----------------------------------------------------------------------

include/configs/MIP405.h

@@ -396,7 +396,6 @@
  ************************************************************/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /************************************************************

include/configs/MPC8315ERDB.h

@@ -634,7 +634,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8323ERDB.h

@@ -481,7 +481,6 @@
 
 #if (CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC832XEMDS.h

@@ -574,7 +574,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8349EMDS.h

@@ -737,7 +737,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8349ITX.h

@@ -730,7 +730,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 

include/configs/MPC8360EMDS.h

@@ -683,7 +683,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8360ERDK.h

@@ -544,7 +544,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC837XEMDS.h

@@ -662,7 +662,6 @@ extern int board_pci_host_broken(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC837XERDB.h

@@ -678,7 +678,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8536DS.h

@@ -740,7 +740,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8540ADS.h

@@ -397,7 +397,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 

include/configs/MPC8541CDS.h

@@ -410,7 +410,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8544DS.h

@@ -441,7 +441,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8548CDS.h

@@ -535,7 +535,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8555CDS.h

@@ -408,7 +408,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8560ADS.h

@@ -438,7 +438,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 

include/configs/MPC8568MDS.h

@@ -430,7 +430,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8569MDS.h

@@ -566,7 +566,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8572DS.h

@@ -682,7 +682,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8610HPCD.h

@@ -517,7 +517,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/MPC8641HPCN.h

@@ -670,7 +670,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-    #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/P1010RDB.h

@@ -739,7 +739,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/P1022DS.h

@@ -725,7 +725,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/P1023RDS.h

@@ -469,7 +469,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/P1_P2_RDB.h

@@ -606,7 +606,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/P2020COME.h

@@ -432,7 +432,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/P2020DS.h

@@ -670,7 +670,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/P2041RDB.h

@@ -677,7 +677,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/PIP405.h

@@ -353,7 +353,6 @@
  ************************************************************/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /************************************************************

include/configs/PMC440.h

@@ -492,7 +492,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* pass open firmware flat tree */

include/configs/T1040QDS.h

@@ -682,7 +682,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/T1040RDB.h

@@ -609,7 +609,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/T1042RDB_PI.h

@@ -613,7 +613,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/TQM834x.h

@@ -495,7 +495,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/VCMA9.h

@@ -138,8 +138,6 @@
 #if defined(CONFIG_CMD_KGDB)
 /* speed to run kgdb serial port */
 #define CONFIG_KGDB_BAUDRATE		115200
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /* Miscellaneous configurable options */

include/configs/W7OLMC.h

@@ -301,7 +301,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
 #endif
 
 /*

include/configs/W7OLMG.h

@@ -304,7 +304,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
 #endif
 
 /*

include/configs/ac14xx.h

@@ -471,7 +471,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*

include/configs/actux1.h

@@ -58,8 +58,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */

include/configs/actux2.h

@@ -51,8 +51,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */

include/configs/actux3.h

@@ -49,8 +49,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */

include/configs/actux4.h

@@ -56,8 +56,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */

include/configs/alpr.h

@@ -349,7 +349,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* pass open firmware flat tree */

include/configs/amcc-common.h

@@ -125,7 +125,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 /*

include/configs/aria.h

@@ -507,7 +507,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*

include/configs/balloon3.h

@@ -61,7 +61,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*

include/configs/coreboot.h

@@ -204,7 +204,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE			115200
-#define CONFIG_KGDB_SER_INDEX			2
 #endif
 
 /*

include/configs/corenet_ds.h

@@ -672,7 +672,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/csb272.h

@@ -99,7 +99,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/csb472.h

@@ -98,7 +98,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/dvlhost.h

@@ -57,8 +57,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */

include/configs/km/kmp204x-common.h

@@ -385,7 +385,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define __USB_PHY_TYPE	utmi

include/configs/korat.h

@@ -542,7 +542,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port	*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 /* Pass open firmware flat tree */

include/configs/lp8x4x.h

@@ -93,7 +93,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*

include/configs/lubbock.h

@@ -86,7 +86,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*

include/configs/lwmon5.h

@@ -660,7 +660,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
 
 /*

include/configs/mecp5123.h

@@ -364,7 +364,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/mpc5121ads.h

@@ -520,7 +520,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/mpq101.h

@@ -345,7 +345,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 # define CONFIG_KGDB_BAUDRATE  230400 /* speed to run kgdb serial port */
-# define CONFIG_KGDB_SER_INDEX 2      /* which serial port to use */
 #endif
 
 /*

include/configs/mx1ads.h

@@ -86,8 +86,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-						/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
 #endif
 
 /*

include/configs/omap5912osk.h

@@ -94,7 +94,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
 #endif
 
 /*

include/configs/p1_p2_rdb_pc.h

@@ -928,7 +928,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/p3p440.h

@@ -303,6 +303,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */

include/configs/palmld.h

@@ -93,7 +93,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*

include/configs/palmtc.h

@@ -95,7 +95,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*

include/configs/palmtreo680.h

@@ -94,7 +94,6 @@
  */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE            230400  /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX           2       /* which serial port to use */
 #endif
 
 /*

include/configs/pcs440ep.h

@@ -427,7 +427,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*-----------------------------------------------------------------------

include/configs/pdm360ng.h

@@ -441,7 +441,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* POST support */

include/configs/pxa-common.h

@@ -16,7 +16,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400
-#define	CONFIG_KGDB_SER_INDEX		2
 #endif
 
 /*

include/configs/pxa255_idp.h

@@ -199,7 +199,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*

include/configs/quad100hd.h

@@ -265,7 +265,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /* ENVIRONMENT VARS */

include/configs/rsdproto.h

@@ -121,7 +121,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*

include/configs/sbc8349.h

@@ -643,7 +643,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/sbc8548.h

@@ -575,7 +575,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/sbc8641d.h

@@ -523,7 +523,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/smdk2410.h

@@ -101,8 +101,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/socrates.h

@@ -363,7 +363,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 

include/configs/stxgp3.h

@@ -341,7 +341,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */

include/configs/stxssa.h

@@ -376,7 +376,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */

include/configs/t4qds.h

@@ -303,7 +303,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/trizepsiv.h

@@ -125,7 +125,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*

include/configs/vme8349.h

@@ -539,7 +539,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*

include/configs/vpac270.h

@@ -124,7 +124,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*

include/configs/xaeniax.h

@@ -84,7 +84,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200			/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1			/* which serial port to use */
 #endif
 
 /*

include/configs/zeus.h

@@ -283,7 +283,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*

include/configs/zipitz2.h

@@ -117,7 +117,6 @@ unsigned char zipitz2_spi_read(void);
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400		/* speed to run kgdb serial port */
-#define	CONFIG_KGDB_SER_INDEX		2		/* which serial port to use */
 #endif
 
 /*