mx6ull: Handle the CONFIG_MX6ULL cases correctly

Since commit 051ba9e082f7 ("Kconfig: mx6ull: Deselect MX6UL from
CONFIG_MX6ULL") CONFIG_MX6ULL does not select CONFIG_MX6UL anymore, so
take this into consideration in all the checks for CONFIG_MX6UL.

This fixes a boot regression.

Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Breno Lima <breno.lima@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>

arch/arm/include/asm/arch-mx6/imx-regs.h

@@ -17,7 +17,7 @@
 #define GPU_2D_ARB_END_ADDR             0x02203FFF
 #define OPENVG_ARB_BASE_ADDR            0x02204000
 #define OPENVG_ARB_END_ADDR             0x02207FFF
-#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #define CAAM_ARB_BASE_ADDR              0x00100000
 #define CAAM_ARB_END_ADDR               0x00107FFF
 #define GPU_ARB_BASE_ADDR               0x01800000
@@ -46,7 +46,8 @@
 #define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
 
 /* GPV - PL301 configuration ports */
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+#if (defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
 	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL))
 #define GPV2_BASE_ADDR                  0x00D00000
 #define GPV3_BASE_ADDR			0x00E00000
@@ -88,7 +89,7 @@
 #define QSPI0_AMBA_END                 0x6FFFFFFF
 #define QSPI1_AMBA_BASE                0x70000000
 #define QSPI1_AMBA_END                 0x7FFFFFFF
-#elif defined(CONFIG_MX6UL)
+#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #define WEIM_ARB_BASE_ADDR              0x50000000
 #define WEIM_ARB_END_ADDR               0x57FFFFFF
 #define QSPI0_AMBA_BASE                 0x60000000
@@ -109,7 +110,8 @@
 #endif
 
 #if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
-	defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+	defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #define MMDC0_ARB_BASE_ADDR             0x80000000
 #define MMDC0_ARB_END_ADDR              0xFFFFFFFF
 #define MMDC1_ARB_BASE_ADDR             0xC0000000
@@ -262,7 +264,7 @@
 #define MMDC_P0_BASE_ADDR           (AIPS2_OFF_BASE_ADDR + 0x30000)
 /* i.MX6SL/SLL */
 #define RNGB_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x34000)
-#ifdef CONFIG_MX6UL
+#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #define ENET2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x34000)
 #else
 /* i.MX6SX */
@@ -288,7 +290,7 @@
 #define IP2APB_PERFMON3_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x4C000)
 #endif
 #define IP2APB_TZASC1_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x50000)
-#ifdef CONFIG_MX6UL
+#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #define QSPI0_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x60000)
 #define UART6_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x7C000)
 #elif defined(CONFIG_MX6SX)
@@ -337,7 +339,7 @@
 #define PWM6_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xA8000)
 #define PWM7_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xAC000)
 #define PWM8_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xB0000)
-#elif defined(CONFIG_MX6ULL)
+#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #define AIPS3_CONFIG_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x7C000)
 #define DCP_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x80000)
 #define RNGB_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x84000)
@@ -354,7 +356,8 @@
 #define MX6SX_LCDIF1_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x20000)
 #define MX6SX_WDOG3_BASE_ADDR       (AIPS3_ARB_BASE_ADDR + 0x88000)
 
-#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+#if !(defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
 	defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL))
 #define IRAM_SIZE                    0x00040000
 #else
@@ -573,7 +576,7 @@ struct src {
 #define IOMUXC_GPR12_LOS_LEVEL			(0x1f << 4)
 
 struct iomuxc {
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 	u8 reserved[0x4000];
 #endif
 	u32 gpr[14];
@@ -700,7 +703,7 @@ struct cspi_regs {
 #define MXC_CSPICON_SSPOL	12 /* SS polarity */
 #define MXC_CSPICON_CTL		20 /* inactive state of SCLK */
 #if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
-	defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
+	defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
 #define MXC_SPI_BASE_ADDRESSES \
 	ECSPI1_BASE_ADDR, \
 	ECSPI2_BASE_ADDR, \

arch/arm/include/asm/arch-mx6/mx6-ddr.h

@@ -16,7 +16,7 @@
 #ifdef CONFIG_MX6SX
 #include "mx6sx-ddr.h"
 #else
-#ifdef CONFIG_MX6UL
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
 #include "mx6ul-ddr.h"
 #else
 #ifdef CONFIG_MX6SL

arch/arm/include/asm/arch-mx6/mx6ul-ddr.h

@@ -7,7 +7,7 @@
 #ifndef __ASM_ARCH_MX6UL_DDR_H__
 #define __ASM_ARCH_MX6UL_DDR_H__
 
-#ifndef CONFIG_MX6UL
+#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #error "wrong CPU"
 #endif
 

arch/arm/include/asm/mach-imx/iomux-v3.h

@@ -127,7 +127,7 @@ typedef u64 iomux_v3_cfg_t;
 
 #define PAD_CTL_ODE		(1 << 11)
 
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)
+#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
 #define PAD_CTL_SPEED_LOW	(0 << 6)
 #else
 #define PAD_CTL_SPEED_LOW	(1 << 6)
@@ -253,7 +253,7 @@ if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {				\
 	imx_iomux_v3_setup_pad(MX6Q_##def);
 #define SETUP_IOMUX_PADS(x)					\
 	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
-#elif defined(CONFIG_MX6UL)
+#elif defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
 #define IOMUX_PADS(x) MX6_##x
 #define SETUP_IOMUX_PAD(def)					\
 	imx_iomux_v3_setup_pad(MX6_##def);

arch/arm/include/asm/mach-imx/regs-lcdif.h

@@ -19,8 +19,11 @@
 struct mxs_lcdif_regs {
 	mxs_reg_32(hw_lcdif_ctrl)		/* 0x00 */
 	mxs_reg_32(hw_lcdif_ctrl1)		/* 0x10 */
-#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
-	defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
+
+#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX7)
 	mxs_reg_32(hw_lcdif_ctrl2)		/* 0x20 */
 #endif
 	mxs_reg_32(hw_lcdif_transfer_count)	/* 0x20/0x30 */
@@ -55,8 +58,10 @@ struct mxs_lcdif_regs {
 #endif
 	mxs_reg_32(hw_lcdif_data)		/* 0x1b0/0x180 */
 	mxs_reg_32(hw_lcdif_bm_error_stat)	/* 0x1c0/0x190 */
-#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
-	defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
+#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX7)
 	mxs_reg_32(hw_lcdif_crc_stat)		/* 0x1a0 */
 #endif
 	mxs_reg_32(hw_lcdif_lcdif_stat)		/* 0x1d0/0x1b0 */
@@ -64,8 +69,10 @@ struct mxs_lcdif_regs {
 	mxs_reg_32(hw_lcdif_debug0)		/* 0x1f0/0x1d0 */
 	mxs_reg_32(hw_lcdif_debug1)		/* 0x200/0x1e0 */
 	mxs_reg_32(hw_lcdif_debug2)		/* 0x1f0 */
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX7) || \
-	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
+#if defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+	defined(CONFIG_MX7)
 	mxs_reg_32(hw_lcdif_thres)
 	mxs_reg_32(hw_lcdif_as_ctrl)
 	mxs_reg_32(hw_lcdif_as_buf)

arch/arm/mach-imx/mx6/Kconfig

@@ -8,7 +8,7 @@ config MX6_SMP
 	bool
 
 config MX6
-	select ARM_ERRATA_743622 if !MX6UL
+	select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
 	bool
 	default y
 	imply CMD_FUSE

arch/arm/mach-imx/mx6/ddr.c

@@ -631,7 +631,7 @@ void mx6sx_dram_iocfg(unsigned width,
 }
 #endif
 
-#ifdef CONFIG_MX6UL
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
 void mx6ul_dram_iocfg(unsigned width,
 		      const struct mx6ul_iomux_ddr_regs *ddr,
 		      const struct mx6ul_iomux_grp_regs *grp)

drivers/gpio/mxc_gpio.c

@@ -47,12 +47,12 @@ static unsigned long gpio_ports[] = {
 #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_MX7)
 	[4] = GPIO5_BASE_ADDR,
-#ifndef CONFIG_MX6UL
+#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 	[5] = GPIO6_BASE_ADDR,
 #endif
 #endif
 #if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_MX7)
-#ifndef CONFIG_MX6UL
+#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 	[6] = GPIO7_BASE_ADDR,
 #endif
 #endif

include/configs/imx6_spl.h

@@ -55,7 +55,8 @@
 # endif
 #endif
 
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
+#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
 #define CONFIG_SPL_BSS_START_ADDR      0x88200000
 #define CONFIG_SPL_BSS_MAX_SIZE        0x100000		/* 1 MB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000

include/configs/mx6_common.h

@@ -7,7 +7,7 @@
 #ifndef __MX6_COMMON_H
 #define __MX6_COMMON_H
 
-#ifndef CONFIG_MX6UL
+#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
 #ifndef CONFIG_SYS_L2CACHE_OFF
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE	L2_PL310_BASE
@@ -37,8 +37,9 @@
 #define CONFIG_REVISION_TAG
 
 /* Boot options */
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
-	defined(CONFIG_MX6UL) || defined(CONFIG_MX6SLL))
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
+	defined(CONFIG_MX6SX) || \
+	defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
 #define CONFIG_LOADADDR		0x82000000
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0x87800000