Browse Source

spi: ti_qspi: Remove unnecessary udelay for AM437x

This udelay() was added as an HACK and is no longer required. All
read/write/erase operations work fine even without this delay. Hence,
remove the udelay() call.

Tested read/write/erase operation on AM437x SK. Also tested QSPI Boot.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Vignesh R 8 years ago
parent
commit
28b69f6488
1 changed files with 0 additions and 7 deletions
  1. 0 7
      drivers/spi/ti_qspi.c

+ 0 - 7
drivers/spi/ti_qspi.c

@@ -226,13 +226,6 @@ static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
 		priv->cmd |= QSPI_3_PIN;
 	priv->cmd |= 0xfff;
 
-/* FIXME: This delay is required for successfull
- * completion of read/write/erase. Once its root
- * caused, it will be remove from the driver.
- */
-#ifdef CONFIG_AM43XX
-	udelay(100);
-#endif
 	while (words) {
 		u8 xfer_len = 0;