include: remove CONFIG_SPL/CONFIG_TPL definition in config headers

Now CONFIG_SPL and CONFIG_TPL are defined in Kconfig.

Remove the redundant definition in config headers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

include/configs/B4860QDS.h

@@ -23,7 +23,6 @@
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
 #else
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

include/configs/BSC9131RDB.h

@@ -25,7 +25,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT

include/configs/BSC9132QDS.h

@@ -41,7 +41,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT

include/configs/C29XPCIE.h

@@ -24,8 +24,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
-#define CONFIG_TPL 1
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE

include/configs/MPC8313ERDB.h

@@ -19,7 +19,6 @@
 #define CONFIG_MPC8313ERDB	1
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT

include/configs/P1010RDB.h

@@ -21,7 +21,6 @@
 #define CONFIG_NAND_FSL_IFC
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
@@ -56,7 +55,6 @@
 #define CONFIG_SYS_TEXT_BASE		0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
 #else
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
@@ -88,7 +86,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -108,7 +105,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #else
-#define CONFIG_TPL 1
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE

include/configs/P1022DS.h

@@ -16,7 +16,6 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -45,7 +44,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -79,8 +77,6 @@
 #define CONFIG_SYS_NAND_MAX_OOBFREE	5
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
-#define CONFIG_TPL 1
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE

include/configs/P1_P2_RDB.h

@@ -36,7 +36,6 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL	1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -64,7 +63,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL	1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -93,8 +91,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL	1
-#define CONFIG_TPL	1
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE

include/configs/T104xRDB.h

@@ -22,7 +22,6 @@
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
 #endif
 
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

include/configs/T208xQDS.h

@@ -55,7 +55,6 @@
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg
 #endif
 
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

include/configs/T208xRDB.h

@@ -44,7 +44,6 @@
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg
 
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

include/configs/T4240QDS.h

@@ -25,7 +25,6 @@
 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
 #else
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

include/configs/a3m071.h

@@ -412,7 +412,6 @@
 /*
  * SPL related defines
  */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NOR_SUPPORT

include/configs/am335x_igep0033.h

@@ -211,7 +211,6 @@
 #undef CONFIG_USE_IRQ
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 /*
  * Place the image at the start of the ROM defined image space.

include/configs/am3517_crane.h

@@ -293,7 +293,6 @@
 					 GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE

include/configs/am3517_evm.h

@@ -302,7 +302,6 @@
 					 GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE

include/configs/apf27.h

@@ -37,7 +37,6 @@
 /*
  * SPL
  */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE	2048

include/configs/arndale.h

@@ -121,7 +121,6 @@
 
 /* MMC SPL */
 #define CONFIG_EXYNOS_SPL
-#define CONFIG_SPL 1
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT

include/configs/bur_am335x_common.h

@@ -164,7 +164,6 @@
  * under common/spl/.  Given our generally common memory map, we set a
  * number of related defaults and sizes here.
  */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 /*
  * Place the image at the start of the ROM defined image space.

include/configs/cam_enc_4xx.h

@@ -199,7 +199,6 @@
 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT

include/configs/cm_t35.h

@@ -316,7 +316,6 @@
 #define CONFIG_OMAP3_SPI
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 

include/configs/da850evm.h

@@ -368,7 +368,6 @@
 
 #ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \

include/configs/devkit8000.h

@@ -281,7 +281,6 @@
 #define CONFIG_SYS_SRAM_SIZE               0x10000
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 

include/configs/exynos5-dt.h

@@ -136,7 +136,6 @@
 #define CONFIG_TPM_TIS_I2C_SLAVE_ADDR	0x20
 
 /* MMC SPL */
-#define CONFIG_SPL 1
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT

include/configs/hawkboard.h

@@ -46,7 +46,6 @@
 #endif
 
 /* Spl */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SUPPORT

include/configs/ipam390.h

@@ -298,7 +298,6 @@
 					"-(rootfs)"
 
 /* defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \

include/configs/lwmon5.h

@@ -665,7 +665,6 @@
  * SPL related defines
  */
 #ifdef CONFIG_LCD4_LWMON5
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NOR_SUPPORT

include/configs/m53evk.h

@@ -252,7 +252,6 @@
 /*
  * NAND SPL
  */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TARGET		"u-boot-with-nand-spl.imx"
 #define CONFIG_SPL_BOARD_INIT

include/configs/mcx.h

@@ -344,7 +344,6 @@
 					 GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE

include/configs/microblaze-generic.h

@@ -447,7 +447,6 @@
 #endif
 
 /* SPL part */
-#define CONFIG_SPL 1
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LIBCOMMON_SUPPORT

include/configs/mx31pdk.h

@@ -29,7 +29,6 @@
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_MX31_3DS
 
-#define CONFIG_SPL 1
 #define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE	2048

include/configs/mxs.h

@@ -50,7 +50,6 @@
 #define CONFIG_ARCH_MISC_INIT
 
 /* SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE
 #define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mxs"
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"

include/configs/omap3_evm_common.h

@@ -257,7 +257,6 @@
 #define CONFIG_SYS_CACHELINE_SIZE	64
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */

include/configs/omap3_zoom1.h

@@ -26,7 +26,6 @@
 #include <configs/ti_omap3_common.h>
 
 /* Remove SPL boot option - we do not support that on LDP yet */
-#undef CONFIG_SPL
 #undef CONFIG_SPL_FRAMEWORK
 #undef CONFIG_SPL_OS_BOOT
 

include/configs/origen.h

@@ -65,7 +65,6 @@
 #undef CONFIG_CMD_NFS
 
 /* MMC SPL */
-#define CONFIG_SPL 1
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 #define CONFIG_SPL_TEXT_BASE	0x02021410
 

include/configs/p1_p2_rdb_pc.h

@@ -148,7 +148,6 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -177,7 +176,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -207,8 +205,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL 1
-#define CONFIG_TPL 1
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE

include/configs/palmtreo680.h

@@ -205,7 +205,6 @@
 /*
  * SPL
  */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_TEXT_BASE    0xa1700000 /* IPL loads SPL here */
 #define CONFIG_SPL_STACK        0x5c040000 /* end of internal SRAM */
 #define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */

include/configs/pcm051.h

@@ -197,7 +197,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 /*

include/configs/sama5d3_xplained.h

@@ -209,7 +209,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 /* SPL */
-#define CONFIG_SPL	1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		0x10000

include/configs/sama5d3xek.h

@@ -244,7 +244,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
 
 /* SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		0x10000

include/configs/siemens-am33x-common.h

@@ -139,7 +139,6 @@
 #define CONFIG_SYS_I2C_OMAP24XX
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x402F0400
 #define CONFIG_SPL_MAX_SIZE		(101 * 1024)

include/configs/smdkv310.h

@@ -76,7 +76,6 @@
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
 /* MMC SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define COPY_BL2_FNPTR_ADDR	0x00002488
 

include/configs/socfpga_cyclone5.h

@@ -223,7 +223,6 @@
  */
 
 /* Enable building of SPL globally */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 
 /* TEXT_BASE for linking the SPL binary */

include/configs/sunxi-common.h

@@ -127,7 +127,6 @@
 
 #ifdef CONFIG_SPL_FEL
 
-#define CONFIG_SPL	1
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"
 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"
 #define CONFIG_SPL_TEXT_BASE		0x2000

include/configs/tam3517-common.h

@@ -215,7 +215,6 @@
 #define CONFIG_NET_RETRY_COUNT 10
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_CONSOLE

include/configs/tao3530.h

@@ -301,7 +301,6 @@
 #define CONGIG_CMD_STORAGE
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 

include/configs/tegra-common.h

@@ -131,7 +131,6 @@
 #define CONFIG_CMD_ENTERRCM
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_RAM_DEVICE
 #define CONFIG_SPL_BOARD_INIT

include/configs/ti814x_evm.h

@@ -168,7 +168,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40300000
 #define CONFIG_SPL_MAX_SIZE		((128 - 18) * 1024)

include/configs/ti816x_evm.h

@@ -134,7 +134,6 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE    0x40400000
 #define CONFIG_SPL_MAX_SIZE     ((128 - 18) * 1024)

include/configs/ti_armv7_common.h

@@ -198,7 +198,6 @@
  */
 #if !defined(CONFIG_NOR_BOOT) && \
 	!(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_OS_BOOT
 

include/configs/tricorder.h

@@ -331,7 +331,6 @@
 #define CONFIG_SYS_SRAM_SIZE		0x10000
 
 /* Defines for SPL */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 

include/configs/tx25.h

@@ -21,7 +21,6 @@
 
 #define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for U-Boot */
 
-#define CONFIG_SPL 1
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_LDSCRIPT		"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE		2048

include/configs/vpac270.h

@@ -17,7 +17,6 @@
 #define	CONFIG_SYS_TEXT_BASE	0xa0000000
 
 #ifdef	CONFIG_ONENAND
-#define	CONFIG_SPL 1
 #define	CONFIG_SPL_ONENAND_SUPPORT
 #define	CONFIG_SPL_ONENAND_LOAD_ADDR	0x2000
 #define	CONFIG_SPL_ONENAND_LOAD_SIZE	\

include/configs/woodburn_sd.h

@@ -20,7 +20,6 @@
 /*
  * SPL
  */
-#define	CONFIG_SPL 1
 #define CONFIG_SPL_FRAMEWORK
 #define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm1136/u-boot-spl.lds"
 #define	CONFIG_SPL_LIBCOMMON_SUPPORT

include/configs/x600.h

@@ -274,7 +274,6 @@
 /*
  * SPL related defines
  */
-#define CONFIG_SPL 1
 #define CONFIG_SPL_TEXT_BASE	0xd2800b00
 #define	CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/spear"
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"

include/configs/zynq-common.h

@@ -257,7 +257,6 @@
 #define CONFIG_CMD_TFTPPUT
 
 /* SPL part */
-#define CONFIG_SPL 1
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LIBCOMMON_SUPPORT