Merge git://git.denx.de/u-boot-mips

arch/mips/dts/Makefile

@@ -15,6 +15,7 @@ dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
 dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
 dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
+dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
 dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
 dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
 

arch/mips/dts/brcm,bcm6318.dtsi

@@ -153,5 +153,35 @@
 			reg = <0x10004000 0x38>;
 			u-boot,dm-pre-reloc;
 		};
+
+		ehci: usb-controller@10005000 {
+			compatible = "brcm,bcm6318-ehci", "generic-ehci";
+			reg = <0x10005000 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller@10005100 {
+			compatible = "brcm,bcm6318-ohci", "generic-ohci";
+			reg = <0x10005100 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10005200 {
+			compatible = "brcm,bcm6318-usbh";
+			reg = <0x10005200 0x30>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM6318_CLK_USB>;
+			clock-names = "usbh";
+			power-domains = <&periph_pwr BCM6318_PWR_USB>;
+			resets = <&periph_rst BCM6318_RST_USBH>;
+
+			status = "disabled";
+		};
 	};
 };

arch/mips/dts/brcm,bcm63268.dtsi

@@ -183,6 +183,36 @@
 			status = "disabled";
 		};
 
+		ehci: usb-controller@10002500 {
+			compatible = "brcm,bcm63268-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller@10002600 {
+			compatible = "brcm,bcm63268-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10002700 {
+			compatible = "brcm,bcm63268-usbh";
+			reg = <0x10002700 0x38>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM63268_CLK_USBH>, <&timer_clk BCM63268_TCLK_USB_REF>;
+			clock-names = "usbh", "usb_ref";
+			power-domains = <&periph_pwr BCM63268_PWR_USBH>;
+			resets = <&periph_rst BCM63268_RST_USBH>;
+
+			status = "disabled";
+		};
+
 		memory-controller@10003000 {
 			compatible = "brcm,bcm6328-mc";
 			reg = <0x10003000 0x894>;

arch/mips/dts/brcm,bcm6328.dtsi

@@ -153,6 +153,36 @@
 			#power-domain-cells = <1>;
 		};
 
+		ehci: usb-controller@10002500 {
+			compatible = "brcm,bcm6328-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller@10002600 {
+			compatible = "brcm,bcm6328-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10002700 {
+			compatible = "brcm,bcm6328-usbh";
+			reg = <0x10002700 0x38>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM6328_CLK_USBH>;
+			clock-names = "usbh";
+			power-domains = <&periph_pwr BCM6328_PWR_USBH>;
+			resets = <&periph_rst BCM6328_RST_USBH>;
+
+			status = "disabled";
+		};
+
 		memory-controller@10003000 {
 			compatible = "brcm,bcm6328-mc";
 			reg = <0x10003000 0x864>;

arch/mips/dts/brcm,bcm6348.dtsi

@@ -135,6 +135,26 @@
 			status = "disabled";
 		};
 
+		ohci: usb-controller@fffe1b00 {
+			compatible = "brcm,bcm6348-ohci", "generic-ohci";
+			reg = <0xfffe1b00 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@fffe1c00 {
+			compatible = "brcm,bcm6348-usbh";
+			reg = <0xfffe1c00 0x4>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM6348_CLK_USBH>;
+			clock-names = "usbh";
+			resets = <&periph_rst BCM6348_RST_USBH>;
+
+			status = "disabled";
+		};
+
 		memory-controller@fffe2300 {
 			compatible = "brcm,bcm6338-mc";
 			reg = <0xfffe2300 0x38>;

arch/mips/dts/brcm,bcm6358.dtsi

@@ -164,5 +164,32 @@
 			reg = <0xfffe1200 0x4c>;
 			u-boot,dm-pre-reloc;
 		};
+
+		ehci: usb-controller@fffe1300 {
+			compatible = "brcm,bcm6358-ehci", "generic-ehci";
+			reg = <0xfffe1300 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller@fffe1400 {
+			compatible = "brcm,bcm6358-ohci", "generic-ohci";
+			reg = <0xfffe1400 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@fffe1500 {
+			compatible = "brcm,bcm6358-usbh";
+			reg = <0xfffe1500 0x28>;
+			#phy-cells = <0>;
+			resets = <&periph_rst BCM6358_RST_USBH>;
+
+			status = "disabled";
+		};
 	};
 };

arch/mips/dts/brcm,bcm6362.dtsi

@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dt-bindings/clock/bcm6362-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power-domain/bcm6362-power-domain.h>
+#include <dt-bindings/reset/bcm6362-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm6362";
+
+	aliases {
+		spi0 = &lsspi;
+		spi1 = &hsspi;
+	};
+
+	cpus {
+		reg = <0x10000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		u-boot,dm-pre-reloc;
+
+		cpu@0 {
+			compatible = "brcm,bcm6362-cpu", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bcm6362-cpu", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <133333333>;
+		};
+
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			u-boot,dm-pre-reloc;
+		};
+
+		periph_clk: periph-clk {
+			compatible = "brcm,bcm6345-clk";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	ubus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		pll_cntl: syscon@10000008 {
+			compatible = "syscon";
+			reg = <0x10000008 0x4>;
+		};
+
+		syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pll_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		periph_rst: reset-controller@10000010 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0x10000010 0x4>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@1000005c {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x1000005c 0xc>;
+			clocks = <&periph_osc>;
+		};
+
+		wdt-reboot {
+			compatible = "wdt-reboot";
+			wdt = <&wdt>;
+		};
+
+		gpio1: gpio-controller@10000080 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10000080 0x4>, <0x10000088 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <16>;
+
+			status = "disabled";
+		};
+
+		gpio0: gpio-controller@10000084 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10000084 0x4>, <0x1000008c 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		lsspi: spi@10000800 {
+			compatible = "brcm,bcm6358-spi";
+			reg = <0x10000800 0x70c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&periph_clk BCM6362_CLK_SPI>;
+			resets = <&periph_rst BCM6362_RST_SPI>;
+			spi-max-frequency = <20000000>;
+			num-cs = <8>;
+
+			status = "disabled";
+		};
+
+		hsspi: spi@10001000 {
+			compatible = "brcm,bcm6328-hsspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x10001000 0x600>;
+			clocks = <&periph_clk BCM6362_CLK_HSSPI>, <&hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			resets = <&periph_rst BCM6362_RST_SPI>;
+			spi-max-frequency = <50000000>;
+			num-cs = <8>;
+
+			status = "disabled";
+		};
+
+		leds: led-controller@10001900 {
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		periph_pwr: power-controller@10001848 {
+			compatible = "brcm,bcm6328-power-domain";
+			reg = <0x10001848 0x4>;
+			#power-domain-cells = <1>;
+		};
+
+		ehci: usb-controller@10002500 {
+			compatible = "brcm,bcm6362-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller@10002600 {
+			compatible = "brcm,bcm6362-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10002700 {
+			compatible = "brcm,bcm6368-usbh";
+			reg = <0x10002700 0x38>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM6362_CLK_USBH>;
+			clock-names = "usbh";
+			power-domains = <&periph_pwr BCM6362_PWR_USBH>;
+			resets = <&periph_rst BCM6362_RST_USBH>;
+
+			status = "disabled";
+		};
+
+		memory-controller@10003000 {
+			compatible = "brcm,bcm6328-mc";
+			reg = <0x10003000 0x864>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+};

arch/mips/dts/brcm,bcm6368.dtsi

@@ -164,5 +164,34 @@
 			reg = <0x10001200 0x4c>;
 			u-boot,dm-pre-reloc;
 		};
+
+		ehci: usb-controller@10001500 {
+			compatible = "brcm,bcm6368-ehci", "generic-ehci";
+			reg = <0x10001500 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		ohci: usb-controller@10001600 {
+			compatible = "brcm,bcm6368-ohci", "generic-ohci";
+			reg = <0x10001600 0x100>;
+			phys = <&usbh>;
+			big-endian;
+
+			status = "disabled";
+		};
+
+		usbh: usb-phy@10001700 {
+			compatible = "brcm,bcm6368-usbh";
+			reg = <0x10001700 0x38>;
+			#phy-cells = <0>;
+			clocks = <&periph_clk BCM6368_CLK_USBH>;
+			clock-names = "usbh";
+			resets = <&periph_rst BCM6368_RST_USBH>;
+
+			status = "disabled";
+		};
 	};
 };

arch/mips/dts/comtrend,ar-5315u.dts

@@ -21,6 +21,10 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &leds {
 	status = "okay";
 
@@ -67,6 +71,10 @@
 	};
 };
 
+&ohci {
+	status = "okay";
+};
+
 &spi {
 	status = "okay";
 
@@ -83,3 +91,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};

arch/mips/dts/comtrend,ar-5387un.dts

@@ -21,6 +21,10 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &leds {
 	status = "okay";
 
@@ -51,6 +55,10 @@
 	};
 };
 
+&ohci {
+	status = "okay";
+};
+
 &spi {
 	status = "okay";
 
@@ -67,3 +75,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};

arch/mips/dts/comtrend,ct-5361.dts

@@ -39,6 +39,10 @@
 	status = "okay";
 };
 
+&ohci {
+	status = "okay";
+};
+
 &pflash {
 	status = "okay";
 };
@@ -47,3 +51,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};

arch/mips/dts/comtrend,vr-3032u.dts

@@ -21,6 +21,10 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &leds {
 	status = "okay";
 	brcm,serial-leds;
@@ -64,7 +68,15 @@
 	};
 };
 
+&ohci {
+	status = "okay";
+};
+
 &uart0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};

arch/mips/dts/comtrend,wap-5813n.dts

@@ -51,10 +51,18 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &gpio0 {
 	status = "okay";
 };
 
+&ohci {
+	status = "okay";
+};
+
 &pflash {
 	status = "okay";
 };
@@ -63,3 +71,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};

arch/mips/dts/huawei,hg556a.dts

@@ -90,10 +90,18 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &gpio0 {
 	status = "okay";
 };
 
+&ohci {
+	status = "okay";
+};
+
 &pflash {
 	status = "okay";
 };
@@ -102,3 +110,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};

arch/mips/dts/netgear,dgnd3700v2.dts

@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6362.dtsi"
+
+/ {
+	model = "Netgear DGND3700v2";
+	compatible = "netgear,dgnd3700v2", "brcm,bcm6362";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		inet_green {
+			label = "DGND3700v2:green:inet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		dsl_green {
+			label = "DGND3700v2:green:dsl";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		power_amber {
+			label = "DGND3700v2:red:power";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+	brcm,serial-mux;
+
+	led@8 {
+		reg = <8>;
+		label = "DGND3700v2:green:power";
+	};
+
+	led@9 {
+		reg = <9>;
+		active-low;
+		label = "DGND3700v2:green:wps";
+	};
+
+	led@10 {
+		reg = <10>;
+		active-low;
+		label = "DGND3700v2:green:usb1";
+	};
+
+	led@11 {
+		reg = <11>;
+		active-low;
+		label = "DGND3700v2:green:usb2";
+	};
+
+	led@12 {
+		reg = <12>;
+		active-low;
+		label = "DGND3700v2:amber:inet";
+	};
+
+	led@13 {
+		reg = <13>;
+		active-low;
+		label = "DGND3700v2:green:ethernet";
+	};
+
+	led@14 {
+		reg = <14>;
+		active-low;
+		label = "DGND3700v2:amber:dsl";
+	};
+
+	led@16 {
+		reg = <16>;
+		active-low;
+		label = "DGND3700v2:amber:usb1";
+	};
+
+	led@17 {
+		reg = <17>;
+		active-low;
+		label = "DGND3700v2:amber:usb2";
+	};
+
+	led@18 {
+		reg = <18>;
+		active-low;
+		label = "DGND3700v2:amber:ethernet";
+	};
+};
+
+&ohci {
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};

arch/mips/dts/sfr,nb4-ser.dts

@@ -50,6 +50,10 @@
 	};
 };
 
+&ehci {
+	status = "okay";
+};
+
 &gpio0 {
 	status = "okay";
 };
@@ -83,6 +87,10 @@
 	};
 };
 
+&ohci {
+	status = "okay";
+};
+
 &pflash {
 	status = "okay";
 };
@@ -91,3 +99,7 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&usbh {
+	status = "okay";
+};

arch/mips/mach-bmips/Kconfig

@@ -12,6 +12,7 @@ config SYS_SOC
 	default "bcm6348" if SOC_BMIPS_BCM6348
 	default "bcm6358" if SOC_BMIPS_BCM6358
 	default "bcm6368" if SOC_BMIPS_BCM6368
+	default "bcm6362" if SOC_BMIPS_BCM6362
 	default "bcm63268" if SOC_BMIPS_BCM63268
 
 choice
@@ -94,6 +95,17 @@ config SOC_BMIPS_BCM6368
 	help
 	  This supports BMIPS BCM6368 family including BCM6368 and BCM6369.
 
+config SOC_BMIPS_BCM6362
+	bool "BMIPS BCM6362 family"
+	select SUPPORTS_BIG_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select MIPS_TUNE_4KC
+	select MIPS_L1_CACHE_SHIFT_4
+	select SWAP_IO_SPACE
+	select SYSRESET_SYSCON
+	help
+	  This supports BMIPS BCM6362 family including BCM6361 and BCM6362.
+
 config SOC_BMIPS_BCM63268
 	bool "BMIPS BCM63268 family"
 	select SUPPORTS_BIG_ENDIAN
@@ -188,6 +200,17 @@ config BOARD_NETGEAR_CG3100D
 	  ethernet ports, 1 UART, GPIO buttons and LEDs, and a BCM43225
 	  (miniPCIe).
 
+config BOARD_NETGEAR_DGND3700V2
+	bool "Netgear DGND3700v2"
+	depends on SOC_BMIPS_BCM6362
+	select BMIPS_SUPPORTS_BOOT_RAM
+	help
+	  Netgear DGND3700v2 boards have a BCM6362 SoC with 64 MB of RAM and
+	  32 MB of flash (NAND).
+	  Between its different peripherals there's a BCM53125 switch with 5
+	  ethernet ports, 2 USB ports, 1 UART, GPIO buttons and LEDs, and a
+	  BCM43228 (miniPCIe).
+
 config BOARD_SAGEM_FAST1704
 	bool "Sagem F@ST1704"
 	depends on SOC_BMIPS_BCM6338
@@ -235,6 +258,7 @@ source "board/comtrend/vr3032u/Kconfig"
 source "board/comtrend/wap5813n/Kconfig"
 source "board/huawei/hg556a/Kconfig"
 source "board/netgear/cg3100d/Kconfig"
+source "board/netgear/dgnd3700v2/Kconfig"
 source "board/sagem/f@st1704/Kconfig"
 source "board/sfr/nb4_ser/Kconfig"
 

board/micronas/vct/scc.c

@@ -524,12 +524,14 @@ int scc_setup_dma(enum scc_id id, u32 buffer_tag,
 	struct scc_dma_state *dma_state;
 	int return_value = 0;
 	union scc_dma_cfg dma_cfg;
-	u32 *buffer_tag_list = scc_descriptor_table[id].buffer_tag_list;
+	u32 *buffer_tag_list;
 	u32 tag_count, t, t_valid;
 
 	if ((id >= SCC_MAX) || (id < 0))
 		return -EINVAL;
 
+	buffer_tag_list = scc_descriptor_table[id].buffer_tag_list;
+
 	/* if the register is only configured by hw, cannot write! */
 	if (1 == scc_descriptor_table[id].hw_dma_cfg)
 		return -EACCES;

board/netgear/dgnd3700v2/Kconfig

@@ -0,0 +1,12 @@
+if BOARD_NETGEAR_DGND3700V2
+
+config SYS_BOARD
+	default "dgnd3700v2"
+
+config SYS_VENDOR
+	default "netgear"
+
+config SYS_CONFIG_NAME
+	default "netgear_dgnd3700v2"
+
+endif

board/netgear/dgnd3700v2/MAINTAINERS

@@ -0,0 +1,6 @@
+NETGEAR DGND3700V2 BOARD
+M:	Álvaro Fernández Rojas <noltari@gmail.com>
+S:	Maintained
+F:	board/netgear/dgnd3700v2/
+F:	include/configs/netgear_dgnd3700v2.h
+F:	configs/netgear_dgnd3700v2_ram_defconfig

board/netgear/dgnd3700v2/Makefile

@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += dgnd3700v2.o

board/netgear/dgnd3700v2/dgnd3700v2.c

@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define GPIO_BASE_6362			0x10000080
+
+#define GPIO_MODE_6362_REG		0x18
+#define GPIO_MODE_6362_SERIAL_LED_DATA	BIT(2)
+#define GPIO_MODE_6362_SERIAL_LED_CLK	BIT(3)
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	void __iomem *gpio_regs = map_physmem(GPIO_BASE_6362, 0, MAP_NOCACHE);
+
+	/* Enable Serial LEDs */
+	setbits_be32(gpio_regs + GPIO_MODE_6362_REG,
+		     GPIO_MODE_6362_SERIAL_LED_DATA |
+		     GPIO_MODE_6362_SERIAL_LED_CLK);
+
+	return 0;
+}
+#endif

configs/comtrend_ar5315u_ram_defconfig

@@ -27,7 +27,9 @@ CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y
@@ -38,7 +40,8 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
-CONFIG_POWER_DOMAIN=y
+CONFIG_PHY=y
+CONFIG_BCM6318_USBH_PHY=y
 CONFIG_BCM6328_POWER_DOMAIN=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_BCM6345=y
@@ -47,3 +50,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
 CONFIG_DM_SPI=y
 CONFIG_BCM63XX_HSSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y

configs/comtrend_ar5387un_ram_defconfig

@@ -27,7 +27,9 @@ CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y
@@ -38,6 +40,8 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY=y
+CONFIG_BCM6368_USBH_PHY=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_BCM6328_POWER_DOMAIN=y
 CONFIG_DM_RESET=y
@@ -47,3 +51,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
 CONFIG_DM_SPI=y
 CONFIG_BCM63XX_HSSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y

configs/comtrend_ct5361_ram_defconfig

@@ -24,7 +24,9 @@ CONFIG_CMD_LICENSE=y
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y
@@ -34,9 +36,15 @@ CONFIG_LED_GPIO=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_CFI_FLASH=y
+CONFIG_PHY=y
+CONFIG_BCM6348_USBH_PHY=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_BCM6345=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
 CONFIG_WDT_BCM6345=y

configs/comtrend_vr3032u_ram_defconfig

@@ -25,13 +25,17 @@ CONFIG_CMD_LICENSE=y
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y
 CONFIG_LED=y
 CONFIG_LED_BCM6328=y
 CONFIG_LED_BLINK=y
+CONFIG_PHY=y
+CONFIG_BCM6368_USBH_PHY=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_BCM6328_POWER_DOMAIN=y
 CONFIG_DM_RESET=y
@@ -39,3 +43,9 @@ CONFIG_RESET_BCM6345=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y

configs/comtrend_wap5813n_ram_defconfig

@@ -24,7 +24,9 @@ CONFIG_CMD_LICENSE=y
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y
@@ -34,8 +36,16 @@ CONFIG_LED_GPIO=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_CFI_FLASH=y
+CONFIG_PHY=y
+CONFIG_BCM6368_USBH_PHY=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_BCM6345=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y

configs/huawei_hg556a_ram_defconfig

@@ -24,7 +24,9 @@ CONFIG_CMD_LICENSE=y
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y
@@ -34,8 +36,16 @@ CONFIG_LED_GPIO=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_CFI_FLASH=y
+CONFIG_PHY=y
+CONFIG_BCM6358_USBH_PHY=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_BCM6345=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y

configs/netgear_cg3100d_ram_defconfig

@@ -27,6 +27,7 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y

configs/netgear_dgnd3700v2_ram_defconfig

@@ -0,0 +1,55 @@
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_ARCH_BMIPS=y
+CONFIG_SOC_BMIPS_BCM6362=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="netgear,dgnd3700v2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="DGND3700v2 # "
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_DM_GPIO=y
+CONFIG_BCM6345_GPIO=y
+CONFIG_LED=y
+CONFIG_LED_BCM6328=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+CONFIG_PHY=y
+CONFIG_BCM6368_USBH_PHY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_BCM6328_POWER_DOMAIN=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_BCM6345=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DM_SERIAL=y
+CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y

configs/sagem_f@st1704_ram_defconfig

@@ -28,6 +28,7 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y

configs/sfr_nb4-ser_ram_defconfig

@@ -25,7 +25,9 @@ CONFIG_CMD_LICENSE=y
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_MISC is not set
+CONFIG_OF_EMBED=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_DM_GPIO=y
@@ -36,8 +38,16 @@ CONFIG_LED_GPIO=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_CFI_FLASH=y
+CONFIG_PHY=y
+CONFIG_BCM6358_USBH_PHY=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_BCM6345=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y

drivers/cpu/bmips_cpu.c

@@ -50,6 +50,10 @@ DECLARE_GLOBAL_DATA_PTR;
 #define DMIPSPLLCFG_6358_N2_SHIFT	29
 #define DMIPSPLLCFG_6358_N2_MASK	(0x7 << DMIPSPLLCFG_6358_N2_SHIFT)
 
+#define REG_BCM6362_MISC_STRAPBUS	0x1814
+#define STRAPBUS_6362_FCVO_SHIFT	1
+#define STRAPBUS_6362_FCVO_MASK		(0x1f << STRAPBUS_6362_FCVO_SHIFT)
+
 #define REG_BCM6368_DDR_DMIPSPLLCFG	0x12a0
 #define DMIPSPLLCFG_6368_P1_SHIFT	0
 #define DMIPSPLLCFG_6368_P1_MASK	(0xf << DMIPSPLLCFG_6368_P1_SHIFT)
@@ -194,6 +198,44 @@ static ulong bcm6358_get_cpu_freq(struct bmips_cpu_priv *priv)
 	return (16 * 1000000 * n1 * n2) / m1;
 }
 
+static ulong bcm6362_get_cpu_freq(struct bmips_cpu_priv *priv)
+{
+	unsigned int mips_pll_fcvo;
+
+	mips_pll_fcvo = readl_be(priv->regs + REG_BCM6362_MISC_STRAPBUS);
+	mips_pll_fcvo = (mips_pll_fcvo & STRAPBUS_6362_FCVO_MASK)
+			>> STRAPBUS_6362_FCVO_SHIFT;
+
+	switch (mips_pll_fcvo) {
+	case 0x03:
+	case 0x0b:
+	case 0x13:
+	case 0x1b:
+		return 240000000;
+	case 0x04:
+	case 0x0c:
+	case 0x14:
+	case 0x1c:
+		return 160000000;
+	case 0x05:
+	case 0x0e:
+	case 0x16:
+	case 0x1e:
+	case 0x1f:
+		return 400000000;
+	case 0x06:
+		return 440000000;
+	case 0x07:
+	case 0x17:
+		return 384000000;
+	case 0x15:
+	case 0x1d:
+		return 200000000;
+	default:
+		return 320000000;
+	}
+}
+
 static ulong bcm6368_get_cpu_freq(struct bmips_cpu_priv *priv)
 {
 	unsigned int tmp, p1, p2, ndiv, m1;
@@ -289,6 +331,12 @@ static const struct bmips_cpu_hw bmips_cpu_bcm6358 = {
 	.get_cpu_count = bcm6358_get_cpu_count,
 };
 
+static const struct bmips_cpu_hw bmips_cpu_bcm6362 = {
+	.get_cpu_desc = bmips_short_cpu_desc,
+	.get_cpu_freq = bcm6362_get_cpu_freq,
+	.get_cpu_count = bcm6358_get_cpu_count,
+};
+
 static const struct bmips_cpu_hw bmips_cpu_bcm6368 = {
 	.get_cpu_desc = bmips_short_cpu_desc,
 	.get_cpu_freq = bcm6368_get_cpu_freq,
@@ -394,6 +442,9 @@ static const struct udevice_id bmips_cpu_ids[] = {
 	}, {
 		.compatible = "brcm,bcm6358-cpu",
 		.data = (ulong)&bmips_cpu_bcm6358,
+	}, {
+		.compatible = "brcm,bcm6362-cpu",
+		.data = (ulong)&bmips_cpu_bcm6362,
 	}, {
 		.compatible = "brcm,bcm6368-cpu",
 		.data = (ulong)&bmips_cpu_bcm6368,

drivers/phy/Kconfig

@@ -59,6 +59,31 @@ config SPL_NOP_PHY
 	  This is useful when a driver uses the PHY framework but no real PHY
 	  hardware exists.
 
+config BCM6318_USBH_PHY
+	bool "BCM6318 USBH PHY support"
+	depends on PHY && ARCH_BMIPS
+	select POWER_DOMAIN
+	help
+	  Support for the Broadcom MIPS BCM6318 USBH PHY.
+
+config BCM6348_USBH_PHY
+	bool "BCM6348 USBH PHY support"
+	depends on PHY && ARCH_BMIPS
+	help
+	  Support for the Broadcom MIPS BCM6348 USBH PHY.
+
+config BCM6358_USBH_PHY
+	bool "BCM6358 USBH PHY support"
+	depends on PHY && ARCH_BMIPS
+	help
+	  Support for the Broadcom MIPS BCM6358 USBH PHY.
+
+config BCM6368_USBH_PHY
+	bool "BCM6368 USBH PHY support"
+	depends on PHY && ARCH_BMIPS
+	help
+	  Support for the Broadcom MIPS BCM6368 USBH PHY.
+
 config PIPE3_PHY
 	bool "Support omap's PIPE3 PHY"
 	depends on PHY && ARCH_OMAP2PLUS

drivers/phy/Makefile

@@ -7,6 +7,10 @@
 
 obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
 obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
+obj-$(CONFIG_BCM6318_USBH_PHY) += bcm6318-usbh-phy.o
+obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
+obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o
+obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o
 obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
 obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
 obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o

drivers/phy/bcm6318-usbh-phy.c

@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ *	Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ *	Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+/* USBH Setup register */
+#define USBH_SETUP_REG		0x00
+#define USBH_SETUP_IOC		BIT(4)
+
+/* USBH PLL Control register */
+#define USBH_PLL_REG		0x04
+#define USBH_PLL_SUSP_EN	BIT(27)
+#define USBH_PLL_IDDQ_PWRDN	BIT(31)
+
+/* USBH Swap Control register */
+#define USBH_SWAP_REG		0x0c
+#define USBH_SWAP_OHCI_DATA	BIT(0)
+#define USBH_SWAP_OHCI_ENDIAN	BIT(1)
+#define USBH_SWAP_EHCI_DATA	BIT(3)
+#define USBH_SWAP_EHCI_ENDIAN	BIT(4)
+
+/* USBH Sim Control register */
+#define USBH_SIM_REG		0x20
+#define USBH_SIM_LADDR		BIT(5)
+
+struct bcm6318_usbh_priv {
+	void __iomem *regs;
+};
+
+static int bcm6318_usbh_init(struct phy *phy)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(phy->dev);
+
+	/* enable pll control susp */
+	setbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_SUSP_EN);
+
+	/* configure to work in native cpu endian */
+	clrsetbits_be32(priv->regs + USBH_SWAP_REG,
+			USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
+			USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
+
+	/* setup config */
+	setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
+
+	/* disable pll control pwrdn */
+	clrbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_IDDQ_PWRDN);
+
+	/* sim control config */
+	setbits_be32(priv->regs + USBH_SIM_REG, USBH_SIM_LADDR);
+
+	return 0;
+}
+
+static struct phy_ops bcm6318_usbh_ops = {
+	.init = bcm6318_usbh_init,
+};
+
+static const struct udevice_id bcm6318_usbh_ids[] = {
+	{ .compatible = "brcm,bcm6318-usbh" },
+	{ /* sentinel */ }
+};
+
+static int bcm6318_usbh_probe(struct udevice *dev)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(dev);
+	struct power_domain pwr_dom;
+	struct reset_ctl rst_ctl;
+	struct clk clk;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+
+	/* enable usbh clock */
+	ret = clk_get_by_name(dev, "usbh", &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_free(&clk);
+	if (ret < 0)
+		return ret;
+
+	/* enable power domain */
+	ret = power_domain_get(dev, &pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_on(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_free(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	/* perform reset */
+	ret = reset_get_by_index(dev, 0, &rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_deassert(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_free(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	mdelay(100);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(bcm6318_usbh) = {
+	.name = "bcm6318-usbh",
+	.id = UCLASS_PHY,
+	.of_match = bcm6318_usbh_ids,
+	.ops = &bcm6318_usbh_ops,
+	.priv_auto_alloc_size = sizeof(struct bcm6318_usbh_priv),
+	.probe = bcm6318_usbh_probe,
+};

drivers/phy/bcm6348-usbh-phy.c

@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ *	Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ *	Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+#define USBH_SETUP_PORT1_EN	BIT(0)
+
+struct bcm6348_usbh_priv {
+	void __iomem *regs;
+};
+
+static int bcm6348_usbh_init(struct phy *phy)
+{
+	struct bcm6348_usbh_priv *priv = dev_get_priv(phy->dev);
+
+	writel_be(USBH_SETUP_PORT1_EN, priv->regs);
+
+	return 0;
+}
+
+static struct phy_ops bcm6348_usbh_ops = {
+	.init = bcm6348_usbh_init,
+};
+
+static const struct udevice_id bcm6348_usbh_ids[] = {
+	{ .compatible = "brcm,bcm6348-usbh" },
+	{ /* sentinel */ }
+};
+
+static int bcm6348_usbh_probe(struct udevice *dev)
+{
+	struct bcm6348_usbh_priv *priv = dev_get_priv(dev);
+	struct reset_ctl rst_ctl;
+	struct clk clk;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+
+	/* enable usbh clock */
+	ret = clk_get_by_name(dev, "usbh", &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_free(&clk);
+	if (ret < 0)
+		return ret;
+
+	/* perform reset */
+	ret = reset_get_by_index(dev, 0, &rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_deassert(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_free(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(bcm6348_usbh) = {
+	.name = "bcm6348-usbh",
+	.id = UCLASS_PHY,
+	.of_match = bcm6348_usbh_ids,
+	.ops = &bcm6348_usbh_ops,
+	.priv_auto_alloc_size = sizeof(struct bcm6348_usbh_priv),
+	.probe = bcm6348_usbh_probe,
+};

drivers/phy/bcm6358-usbh-phy.c

@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ *	Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ *	Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+/* USBH Swap Control register */
+#define USBH_SWAP_REG		0x00
+#define USBH_SWAP_OHCI_DATA	BIT(0)
+#define USBH_SWAP_OHCI_ENDIAN	BIT(1)
+#define USBH_SWAP_EHCI_DATA	BIT(3)
+#define USBH_SWAP_EHCI_ENDIAN	BIT(4)
+
+/* USBH Test register */
+#define USBH_TEST_REG		0x24
+#define USBH_TEST_PORT_CTL	0x1c0020
+
+struct bcm6358_usbh_priv {
+	void __iomem *regs;
+};
+
+static int bcm6358_usbh_init(struct phy *phy)
+{
+	struct bcm6358_usbh_priv *priv = dev_get_priv(phy->dev);
+
+	/* configure to work in native cpu endian */
+	clrsetbits_be32(priv->regs + USBH_SWAP_REG,
+			USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
+			USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
+
+	/* test port control */
+	writel_be(USBH_TEST_PORT_CTL, priv->regs + USBH_TEST_REG);
+
+	return 0;
+}
+
+static struct phy_ops bcm6358_usbh_ops = {
+	.init = bcm6358_usbh_init,
+};
+
+static const struct udevice_id bcm6358_usbh_ids[] = {
+	{ .compatible = "brcm,bcm6358-usbh" },
+	{ /* sentinel */ }
+};
+
+static int bcm6358_usbh_probe(struct udevice *dev)
+{
+	struct bcm6358_usbh_priv *priv = dev_get_priv(dev);
+	struct reset_ctl rst_ctl;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+
+	/* perform reset */
+	ret = reset_get_by_index(dev, 0, &rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_deassert(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_free(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(bcm6358_usbh) = {
+	.name = "bcm6358-usbh",
+	.id = UCLASS_PHY,
+	.of_match = bcm6358_usbh_ids,
+	.ops = &bcm6358_usbh_ops,
+	.priv_auto_alloc_size = sizeof(struct bcm6358_usbh_priv),
+	.probe = bcm6358_usbh_probe,
+};

drivers/phy/bcm6368-usbh-phy.c

@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ *	Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ *	Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+/* USBH PLL Control register */
+#define USBH_PLL_REG		0x18
+#define USBH_PLL_IDDQ_PWRDN	BIT(9)
+#define USBH_PLL_PWRDN_DELAY	BIT(10)
+
+/* USBH Swap Control register */
+#define USBH_SWAP_REG		0x1c
+#define USBH_SWAP_OHCI_DATA	BIT(0)
+#define USBH_SWAP_OHCI_ENDIAN	BIT(1)
+#define USBH_SWAP_EHCI_DATA	BIT(3)
+#define USBH_SWAP_EHCI_ENDIAN	BIT(4)
+
+/* USBH Setup register */
+#define USBH_SETUP_REG		0x28
+#define USBH_SETUP_IOC		BIT(4)
+#define USBH_SETUP_IPP		BIT(5)
+
+struct bcm6368_usbh_hw {
+	uint32_t setup_clr;
+	uint32_t pll_clr;
+};
+
+struct bcm6368_usbh_priv {
+	const struct bcm6368_usbh_hw *hw;
+	void __iomem *regs;
+};
+
+static int bcm6368_usbh_init(struct phy *phy)
+{
+	struct bcm6368_usbh_priv *priv = dev_get_priv(phy->dev);
+	const struct bcm6368_usbh_hw *hw = priv->hw;
+
+	/* configure to work in native cpu endian */
+	clrsetbits_be32(priv->regs + USBH_SWAP_REG,
+			USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
+			USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
+
+	/* setup config */
+	if (hw->setup_clr)
+		clrbits_be32(priv->regs + USBH_SETUP_REG, hw->setup_clr);
+
+	setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
+
+	/* enable pll control */
+	if (hw->pll_clr)
+		clrbits_be32(priv->regs + USBH_PLL_REG, hw->pll_clr);
+
+	return 0;
+}
+
+static struct phy_ops bcm6368_usbh_ops = {
+	.init = bcm6368_usbh_init,
+};
+
+static const struct bcm6368_usbh_hw bcm6328_hw = {
+	.pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
+	.setup_clr = 0,
+};
+
+static const struct bcm6368_usbh_hw bcm6362_hw = {
+	.pll_clr = 0,
+	.setup_clr = 0,
+};
+
+static const struct bcm6368_usbh_hw bcm6368_hw = {
+	.pll_clr = 0,
+	.setup_clr = 0,
+};
+
+static const struct bcm6368_usbh_hw bcm63268_hw = {
+	.pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
+	.setup_clr = USBH_SETUP_IPP,
+};
+
+static const struct udevice_id bcm6368_usbh_ids[] = {
+	{
+		.compatible = "brcm,bcm6328-usbh",
+		.data = (ulong)&bcm6328_hw,
+	}, {
+		.compatible = "brcm,bcm6362-usbh",
+		.data = (ulong)&bcm6362_hw,
+	}, {
+		.compatible = "brcm,bcm6368-usbh",
+		.data = (ulong)&bcm6368_hw,
+	}, {
+		.compatible = "brcm,bcm63268-usbh",
+		.data = (ulong)&bcm63268_hw,
+	}, { /* sentinel */ }
+};
+
+static int bcm6368_usbh_probe(struct udevice *dev)
+{
+	struct bcm6368_usbh_priv *priv = dev_get_priv(dev);
+	const struct bcm6368_usbh_hw *hw =
+		(const struct bcm6368_usbh_hw *)dev_get_driver_data(dev);
+#if defined(CONFIG_POWER_DOMAIN)
+	struct power_domain pwr_dom;
+#endif
+	struct reset_ctl rst_ctl;
+	struct clk clk;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+	priv->hw = hw;
+
+	/* enable usbh clock */
+	ret = clk_get_by_name(dev, "usbh", &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_free(&clk);
+	if (ret < 0)
+		return ret;
+
+#if defined(CONFIG_POWER_DOMAIN)
+	/* enable power domain */
+	ret = power_domain_get(dev, &pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_on(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_free(&pwr_dom);
+	if (ret < 0)
+		return ret;
+#endif
+
+	/* perform reset */
+	ret = reset_get_by_index(dev, 0, &rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_deassert(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_free(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	/* enable usb_ref clock */
+	ret = clk_get_by_name(dev, "usb_ref", &clk);
+	if (!ret) {
+		ret = clk_enable(&clk);
+		if (ret < 0)
+			return ret;
+
+		ret = clk_free(&clk);
+		if (ret < 0)
+			return ret;
+	}
+
+	mdelay(100);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(bcm6368_usbh) = {
+	.name = "bcm6368-usbh",
+	.id = UCLASS_PHY,
+	.of_match = bcm6368_usbh_ids,
+	.ops = &bcm6368_usbh_ops,
+	.priv_auto_alloc_size = sizeof(struct bcm6368_usbh_priv),
+	.probe = bcm6368_usbh_probe,
+};

include/configs/bmips_bcm6318.h

@@ -14,6 +14,13 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 

include/configs/bmips_bcm63268.h

@@ -14,6 +14,13 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 

include/configs/bmips_bcm6328.h

@@ -14,6 +14,13 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 

include/configs/bmips_bcm6348.h

@@ -14,6 +14,11 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 

include/configs/bmips_bcm6358.h

@@ -14,6 +14,13 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 

include/configs/bmips_bcm6362.h

@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_BMIPS_BCM6362_H
+#define __CONFIG_BMIPS_BCM6362_H
+
+/* CPU */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	200000000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
+/* U-Boot */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
+
+#if defined(CONFIG_BMIPS_BOOT_RAM)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_INIT_SP_OFFSET	0x2000
+#endif
+
+#endif /* __CONFIG_BMIPS_BCM6362_H */

include/configs/bmips_bcm6368.h

@@ -14,6 +14,13 @@
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 
+/* USB */
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_OHCI_NEW
+
 /* U-Boot */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
 

include/configs/netgear_dgnd3700v2.h

@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <configs/bmips_common.h>
+#include <configs/bmips_bcm6362.h>
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_ENV_SIZE			(8 * 1024)
+

include/dt-bindings/clock/bcm6362-clock.h

@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6362_H
+#define __DT_BINDINGS_CLOCK_BCM6362_H
+
+#define BCM6362_CLK_GLESS	0
+#define BCM6362_CLK_ADSL_QPROC	1
+#define BCM6362_CLK_ADSL_AFE	2
+#define BCM6362_CLK_ADSL	3
+#define BCM6362_CLK_MIPS	4
+#define BCM6362_CLK_WLAN_OCP	5
+#define BCM6362_CLK_SWPKT_USB	7
+#define BCM6362_CLK_SWPKT_SAR	8
+#define BCM6362_CLK_SAR		9
+#define BCM6362_CLK_ROBOSW	10
+#define BCM6362_CLK_PCM		11
+#define BCM6362_CLK_USBD	12
+#define BCM6362_CLK_USBH	13
+#define BCM6362_CLK_IPSEC	14
+#define BCM6362_CLK_SPI		15
+#define BCM6362_CLK_HSSPI	16
+#define BCM6362_CLK_PCIE	17
+#define BCM6362_CLK_FAP		18
+#define BCM6362_CLK_PHYMIPS	19
+#define BCM6362_CLK_NAND	20
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6362_H */

include/dt-bindings/power-domain/bcm6362-power-domain.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_POWER_DOMAIN_BCM6362_H
+#define __DT_BINDINGS_POWER_DOMAIN_BCM6362_H
+
+#define BCM6362_PWR_SAR		0
+#define BCM6362_PWR_IPSEC	1
+#define BCM6362_PWR_MIPS	2
+#define BCM6362_PWR_DECT	3
+#define BCM6362_PWR_USBH	4
+#define BCM6362_PWR_USBD	5
+#define BCM6362_PWR_ROBOSW	6
+#define BCM6362_PWR_PCM		7
+#define BCM6362_PWR_PERIPH	8
+#define BCM6362_PWR_ADSL_PHY	9
+#define BCM6362_PWR_GMII_PADS	10
+#define BCM6362_PWR_FAP		11
+#define BCM6362_PWR_PCIE	12
+#define BCM6362_PWR_WLAN_PADS	13
+
+#endif /* __DT_BINDINGS_POWER_DOMAIN_BCM6362_H */

include/dt-bindings/reset/bcm6362-reset.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_RESET_BCM6362_H
+#define __DT_BINDINGS_RESET_BCM6362_H
+
+#define BCM6362_RST_SPI		0
+#define BCM6362_RST_IPSEC	1
+#define BCM6362_RST_EPHY	2
+#define BCM6362_RST_SAR		3
+#define BCM6362_RST_ENETSW	4
+#define BCM6362_RST_USBD	5
+#define BCM6362_RST_USBH	6
+#define BCM6362_RST_PCM		7
+#define BCM6362_RST_PCIE_CORE	8
+#define BCM6362_RST_PCIE	9
+#define BCM6362_RST_PCIE_EXT	10
+#define BCM6362_RST_WLAN_SHIM	11
+#define BCM6362_RST_DDR_PHY	12
+#define BCM6362_RST_FAP		13
+#define BCM6362_RST_WLAN_UBUS	14
+
+#endif /* __DT_BINDINGS_RESET_BCM6362_H */