armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

configs/ls1088aqds_defconfig

@@ -8,9 +8,12 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088aqds_qspi_SECURE_BOOT_defconfig

@@ -11,9 +11,12 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088aqds_qspi_defconfig

@@ -10,9 +10,12 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088aqds_sdcard_ifc_defconfig

@@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
 CONFIG_SD_BOOT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
@@ -21,6 +23,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088aqds_sdcard_qspi_defconfig

@@ -15,6 +15,8 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
 CONFIG_SD_BOOT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -23,6 +25,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088ardb_qspi_SECURE_BOOT_defconfig

@@ -11,9 +11,12 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088ardb_qspi_defconfig

@@ -10,9 +10,12 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig

@@ -16,6 +16,8 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
 CONFIG_SD_BOOT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -26,6 +28,7 @@ CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/ls1088ardb_sdcard_qspi_defconfig

@@ -15,6 +15,8 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
 CONFIG_SD_BOOT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -23,6 +25,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

include/configs/ls1088a_common.h

@@ -148,7 +148,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(512UL * 1024 * 1024)
 #endif
 /* Command line configuration */
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_CACHE
 
 /* Miscellaneous configurable options */
@@ -195,10 +194,6 @@ unsigned long long get_qixis_addr(void);
 	"mcinitcmd=fsl_mc start mc 0x580a00000"	\
 	" 0x580e00000 \0"
 
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/ram0 " \
-				"earlycon=uart8250,mmio,0x21c0500 " \
-				"ramdisk_size=0x3000000 default_hugepagesz=2m" \
-				" hugepagesz=2m hugepages=256"
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND	"sf probe 0:0;" \
 				"sf read 0x80200000 0xd00000 0x100000;"\