ARM: OMAP4/5: Move USB pads to essential list.

USB module pads are getting enabled under non-essential
group. These will be required for fastboot, tftp support.
So move this to essential list to have them working when
non-essential pads are no more muxed.

Signed-off-by: R Sricharan <r.sricharan@ti.com>

board/ti/omap5_evm/mux_data.h

@@ -47,6 +47,15 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 	{SDCARD_DATA3, (PTU | IEN | M0)}, /*  SDCARD_DATA3*/
 	{UART3_RX_IRRX, (PTU | IEN | M0)}, /*  UART3_RX_IRRX    */
 	{UART3_TX_IRTX, (M0)},    /*  UART3_TX_IRTX    */
+	{USBB1_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB1_HSIC_STROBE */
+	{USBB1_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB1_HSIC_DATA */
+	{USBB2_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB2_HSIC_STROBE */
+	{USBB2_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB2_HSIC_DATA  */
+	{USBB3_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB3_HSIC_STROBE*/
+	{USBB3_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB3_HSIC_DATA  */
+	{USBD0_HS_DP, (IEN | M0)},	/*  USBD0_HS_DP */
+	{USBD0_HS_DM, (IEN | M0)},	/*  USBD0_HS_DM */
+	{USBD0_SS_RX, (IEN | M0)},	/*  USBD0_SS_RX */
 
 };
 
@@ -114,10 +123,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{UART2_CTS, (IEN | M1)},    /*  MCSPI3_CS0   */
 	{UART2_RX, (IEN | M1)},    /*  MCSPI3_SIMO  */
 	{UART2_TX, (IEN | M1)},    /*  MCSPI3_CLK   */
-	{USBB1_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB1_HSIC_STROBE */
-	{USBB1_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB1_HSIC_DATA */
-	{USBB2_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB2_HSIC_STROBE */
-	{USBB2_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB2_HSIC_DATA  */
 	{TIMER10_PWM_EVT, (IEN | M0)},    /*  TIMER10_PWM_EVT  */
 	{DSIPORTA_TE0, (IEN | M0)},    /*  DSIPORTA_TE0     */
 	{DSIPORTA_LANE0X, (IEN | M0)},    /*  DSIPORTA_LANE0X  */
@@ -254,11 +259,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{UART6_RTS, (PTU | M0)},    /*  UART6_RTS   */
 	{UART3_CTS_RCTX, (PTU | IEN | M6)},    /*  GPIO5_153   */
 	{UART3_RTS_IRSD, (PTU | IEN | M1)},    /*  HDQ_SIO     */
-	{USBB3_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB3_HSIC_STROBE*/
-	{USBB3_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB3_HSIC_DATA  */
-	{USBD0_HS_DP, (IEN | M0)},    /*  USBD0_HS_DP */
-	{USBD0_HS_DM, (IEN | M0)},    /*  USBD0_HS_DM */
-	{USBD0_SS_RX, (IEN | M0)},    /*  USBD0_SS_RX */
 	{I2C1_PMIC_SCL, (PTU | IEN | M0)},    /*  I2C1_PMIC_SCL  */
 	{I2C1_PMIC_SDA, (PTU | IEN | M0)},    /*  I2C1_PMIC_SDA  */
 

board/ti/sdp4430/sdp4430_mux_data.h

@@ -53,8 +53,18 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 {UART3_CTS_RCTX, (PTU | IEN | M0)},			/* uart3_tx */
 {UART3_RTS_SD, (M0)},					/* uart3_rts_sd */
 {UART3_RX_IRRX, (IEN | M0)},				/* uart3_rx */
-{UART3_TX_IRTX, (M0)}					/* uart3_tx */
-
+{UART3_TX_IRTX, (M0)},					/* uart3_tx */
+{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
+{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
+{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
+{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat7 */
+{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_data */
+{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_strobe */
+{USBC1_ICUSB_DP, (IEN | M0)},					/* usbc1_icusb_dp */
+{USBC1_ICUSB_DM, (IEN | M0)},					/* usbc1_icusb_dm */
+{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},	/* usba0_otg_ce */
+{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dp */
+{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dm */
 };
 
 const struct pad_conf_entry wkup_padconf_array_essential[] = {
@@ -135,14 +145,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{USBB1_ULPITLL_DAT1, (OFF_EN | M1)},				/* hsi1_acdata */
 	{USBB1_ULPITLL_DAT2, (OFF_EN | M1)},				/* hsi1_acflag */
 	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_caready */
-	{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
-	{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
-	{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
-	{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat7 */
-	{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_data */
-	{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_strobe */
-	{USBC1_ICUSB_DP, (IEN | M0)},					/* usbc1_icusb_dp */
-	{USBC1_ICUSB_DM, (IEN | M0)},					/* usbc1_icusb_dm */
 	{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_clkx */
 	{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* abe_mcbsp2_dr */
 	{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp2_dx */
@@ -210,9 +212,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row3 */
 	{UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row4 */
 	{UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row5 */
-	{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},	/* usba0_otg_ce */
-	{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dp */
-	{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dm */
 	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
 	{FREF_CLK2_OUT, (M0)},						/* fref_clk2_out */
 	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */